Abstract:Scale-up in droplet microfluidics achieved by increasing the number of devices running in parallel or increasing the droplet makers in the same device can compromise the narrow droplet-size distribution, or requires high fabrication cost, when glass- or polymer-based microdevices are used. This paper reports a novel way using parallelization of needle-based microfluidic systems to form highly monodispersed droplets with enhanced production rates yet in cost-effective way, even when forming higher order emulsions with complex inner structure. Parallelization of multiple needle-based devices could be realized by applying commercially available two-way connecters and 3D-printed four-way connectors. The production rates of droplets could be enhanced around fourfold (over 660 droplets/min) to eightfold (over 1300 droplets/min) by two-way connecters and four-way connectors, respectively, for the production of the same kind of droplets than a single droplet maker (160 droplets/min). Additionally, parallelization of four-needle sets with each needle specification ranging from 34G to 20G allows for simultaneous generation of four groups of PDMS microdroplets with each group having distinct size yet high monodispersity (CV < 3%). Up to six cores can be encapsulated in double emulsion using two parallelly connected devices via tuning the capillary number of middle phase in a range of 1.31 × 10-4 to 4.64 × 10-4 . This study leads to enhanced production yields of droplets and enables the formation of groups of droplets simultaneously to meet extensive needs of biomedical and environmental applications, such as microcapsules with variable dosages for drug delivery or drug screening, or microcapsules with wide range of absorbent loadings for water treatment.

Simultaneous Generation of Droplets with Different Dimensions in Parallel Integrated Microfluidic Droplet Generators

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

Monodisperse Droplets by Impinging Flow-Focusing

Simultaneous Microfluidic Generation of Droplets with Different Dimensions

Microfluidic Consecutive Flow-Focusing Droplet Generators

Controllable Multiple Mixing Monodisperse Droplet Streams Generation Using Wavelength-Modulated Disturbances

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Dual-stream of Monodisperse Droplet Generator

Droplet Pattern Formation and Translation in New Microfluidic Flow-Focusing Devices

Numerical Simulation of Droplet Generation in Cross-Junction Microchannel under Changing Dispersion Phase Velocities

3D simulation estimation and experimental validation of droplet generation in CFD-based flow-focusing microfluidic chips

A Versatile Microchannel Array Device for Portable and Parallel Droplet Generation

Microfluidic formation of highly monodispersed multiple cored droplets using needle-based system in parallel mode

Numerical and experimental investigations of uniform fluid distribution for droplet formation in parallelized microfluidics

An asymmetric flow-focusing droplet generator promotes rapid mixing of reagents

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

Fabrication of Conical Microstructure Array for Stable Droplet Generation Over Wide Flow Rate Range

Droplet Generation in Micro-Sieve Dispersion Device

Formation of double emulsion droplets in flow-focusing microchips: a numerical parametric study

Using a circular groove surrounded inlet to generate monodisperse droplets inside a microfluidic chip in a gravity-driven manner

On-Chip Droplet Splitting with High Volume Ratios Using a 3D Conical Microstructure-Based Microfluidic Device