Janus non-spherical colloids by asymmetric wet-etching.

Bing Liu,Chengliang Zhang,Jiguang Liu,Xiaozhong Qu,Zhenzhong Yang

DOI: https://doi.org/10.1039/b905981d

IF: 4.9

2009-01-01

Chemical Communications

Abstract:Non-spherical silica Janus colloids are prepared by asymmetric wet-etching at the Pickering emulsion interface, and a variety of non-spherical hybrid silica/PS Janus colloids are derived with tunable polymer volume fraction and morphology.

What problem does this paper attempt to address?

Natural Halloysites-Based Janus Platelet Surfactants for the Formation of Pickering Emulsion and Enhanced Oil Recovery

Lecheng Zhang,Qun Lei,Jianhui Luo,Minxiang Zeng,Ling Wang,Dali Huang,Xuezhen Wang,Sam Mannan,Baoliang Peng,Zhengdong Cheng

DOI: https://doi.org/10.1038/s41598-018-36352-w

IF: 4.6

2019-01-01

Scientific Reports

Abstract:Janus colloidal surfactants with opposing wettabilities are receiving attention for their practical application in industry. Combining the advantages of molecular surfactants and particle-stabilized Pickering emulsions, Janus colloidal surfactants generate remarkably stable emulsions. Here we report a straightforward and cost-efficient strategy to develop Janus nanoplate surfactants (JNPS) from an aluminosilicate nanoclay, halloysite, by stepwise surface modification, including an innovative selective surface modification step. Such colloidal surfactants are found to be able to stabilize Pickering emulsions of different oil/water systems. The microstructural characterization of solidified polystyrene emulsions indicates that the emulsion interface is evenly covered by JNPS. The phase behaviors of water/oil emulsion generated by these novel platelet surfactants were also investigated. Furthermore, we demonstrate the application of JNPS for enhanced oil recovery with a microfluidic flooding test, showing a dramatic increase of oil recovery ratio. This research provides important insights for the design and synthesis of two-dimensional Janus colloidal surfactants, which could be utilized in biomedical, food and mining industries, especially for circumstances where high salinity and high temperature are involved.
Janus Hollow Spheres by Emulsion Interfacial Self-Assembled Sol-Gel Process.

Fuxin Liang,Jiguang Liu,Chengliang Zhang,Xiaozhong Qu,Jiaoli Li,Zhenzhong Yang

DOI: https://doi.org/10.1039/c0cc03599h

IF: 4.9

2011-01-01

Chemical Communications

Abstract:Janus hollow silica spheres with an asymmetric shell are synthesized by self-assembled sol-gel process at an emulsion interface, and desired materials can be preferentially laden inside the cavities from their surroundings.
Large Scale Synthesis of Janus Submicron Sized Colloids by Wet Etching Anisotropic Ones

Chengliang Zhang,Bing Liu,Chen Tang,Jiguang Liu,Xiaozhong Qu,Jiaoli Li,Zhenzhong Yang

DOI: https://doi.org/10.1039/c0cc00054j

IF: 4.9

2010-01-01

Chemical Communications

Abstract:Janus colloids have inspired growing interests due to their diverse potential applications. Herein, we present a facile approach to fabricate Janus submicron sized colloids by the selective etching of anisotropic colloids. Size ratio, microstructure and composition are tunable. The method can be scaled up, which is the key to further exploit practical applications.
Janus Colloids Toward Interfacial Engineering.

Fuxin Liang,Bing Liu,Zheng Cao,Zhenzhong Yang

DOI: https://doi.org/10.1021/acs.langmuir.7b02308

IF: 3.9

2017-01-01

Langmuir

Abstract:Janus colloids are functional particles consisting of two surfaces (or internal materials) with distinct physical or chemical properties in the same particle. Owing to their amphiphilic nature, Janus colloids composed of both hydrophilic and hydrophobic faces provide a powerful tool to generate functional surfaces and to manipulate the properties of interfaces. Amphiphilic Janus colloids have shown promising applications as particulate surfactants in oil/water separation, as interfacial compatibilizers in polymer blends, and as assembly blocks in robust coatings with unique wettability. In this Feature Article, we summarize recent advances in engineering interfaces by using Janus colloids.
Polymeric Janus Particles with Hierarchical Structures

Renhua Deng,Shanqin Liu,Fuxin Liang,Ke Wang,Jintao Zhu,Zhenzhong Yang

DOI: https://doi.org/10.1021/ma500331w

IF: 5.5

2014-01-01

Macromolecules

Abstract:Janus colloidal particles with hierarchical structures are generated by phase separation of diblock copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and homopolymer poly(methyl methacrylate) (PMMA) binary blends in confined geometry. The dependence of their morphology on the copolymer composition, solvent selectivity, particle size, and polymer/aqueous solution interfacial property was investigated. By varying the particle/aqueous solution interfacial property alternately, the Janus particles exhibited a reversible morphological transformation under solvent-adsorption annealing process. In addition, by introducing 3-n-pentadecyphenol (PDP) which can hydrogen bond with P4VP to form supramolecules, the structure of the Janus particles can be well tuned. Furthermore, due to the complexation of pyridine unit with Au precursor, composite Janus particles with Au nanoparticles selectively incorporated in P4VP microdomains can be easily manipulated.
Large Scale Synthesis of Janus Submicrometer Sized Colloids by Seeded Emulsion Polymerization

Chen Tang,Chengliang Zhang,Jiguang Liu,Xiaozhong Qu,Jiaoli Li,Zhenzhong Yang

DOI: https://doi.org/10.1021/ma100437t

IF: 5.5

2010-01-01

Macromolecules

Abstract:We present a facile approach to produce submicrometer sized Janus PAN/PS polymer colloids by seeded emulsion polymerization. Both high cross-linking degree and slow feeding monomer are crucial to control the resultant anisotropic structure, The PAN seed is cross-linked, ensuring that the formed PS bulge contains no PAN, The two different polymers are distinct compartmentalized onto the surface. Other Janus composite colloids with varied composition and microstructure are derived by selective modification of desired polymer part and following favorable growth of other materials therein. The Janus colloids can serve as solid surfactants to emulsify oil/water immiscible mixtures, which have a well-defined orientation at the interface. The method can be scaled up to produce large quantity of submicrometer sized Janus colloids.
Janus Nanoparticles with Tunable Amphiphilicity for Stabilizing Pickering-Emulsion Droplets via Assembly Behavior at Oil-Water Interfaces.

Shuting Xie,Sheng Chen,Qifan Zhu,Xing Li,Dan Wang,Shitao Shen,Mingliang Jin,Guofu Zhou,Yonggang Zhu,Lingling Shui

DOI: https://doi.org/10.1021/acsami.0c05625

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Janus particles (JNPs) with controlled anisotropies are regarded as promising material for sophisticated building blocks and assembly. Herein, a straightforward method was proposed for synthesis of uniformly distributed JNPs with controllable anisotropies, showing two compartmental bulbs with different surface wettability. The synthetic strategy is based on the phase separation induced styrene liquid protrusion on seed poly(styrene-co-acrylic acid) (CPSAA) nanoparticles via controlled swelling, with the formed polystyrene (PS) and CPSAA compartments corresponding to the amount of monomers. The size (lateral length) ratio of formed PS and CPSAA bulbs, DPS/DCPSAA, defined as "Janusity", has been precisely tuned in the range of 0-0.91 by controlling the mass ratio of two monomers. Obtained JNPs with tunable amphiphilicity are utilized as colloid surfactants to prepare Pickering-emulsions of both water-in-oil (W/O) and oil-in-water (O/W) with proper Janusity. The stability of achieved W/O and O/W Pickering-emulsions are dependent on the adhesion energy at the water-oil interfaces. Prepared JNPs have also being utilized to prepare and stabilize monodisperse droplets in microfluidic devices, demonstrating their high potential for fundamental research and practical applications.
Janus Nanosheets of Polymer-Inorganic Layered Composites

Ying Chen,Fuxin Liang,Haili Yang,Chengliang Zhang,Qian Wang,Xiaozhong Qu,Jiaoli Li,Yuanli Cai,Dong Qiu,Zhenzhong Yang

DOI: https://doi.org/10.1021/ma2021908

IF: 5.5

2012-01-01

Macromolecules

Abstract:Janus nanosheets of polymer inorganic layered composites are fabricated by crushing the corresponding Janus composite hollow spheres, which are synthesized by materialization of an amphiphilic emulsion interface with self-organized sol-gel process and subsequent polymer grafting onto the lipophilic side. The Janus composite nanosheets serve as solid surfactants to stabilize emulsion droplets, which are tolerant against solvents. Janus balance of the composite nanosheets is tunable crossing from more lipophilic to hydrophilic by alteration of polymer content. Thereafter, continuous phase of the emulsions can be inverted.
Emulsion Interfacial Synthesis of Asymmetric Janus Particles

Yanhong Wang,Chengliang Zhang,Chen Tang,Jing Li,Ke Shen,Jiguang Liu,Xiaozhong Qu,Jiaoli Li,Qian Wang,Zhenzhong Yang

DOI: https://doi.org/10.1021/ma102945t

IF: 5.5

2011-01-01

Macromolecules

Abstract:We have proposed a simple method to synthesize asymmetric Janus polymer particles at an emulsion interface. Morphological evolution of the particles with polymerization and their dependence on some key variables reveal that both crosslinking degree of the particles and interfacial tension difference play key roles in achieving the asymmetric shapes. By selective growth of functional materials onto the desired sides, composition and microstructure of the Janus particles can be controlled. The representative PS/PAM Janus particles are amphiphilic and can be used as solid surfactants to stabilize emulsions, which preferentially orientate at the interface.
Janus-like Pickering emulsions and their controllable coalescence.

Jie Xu,Aijing Ma,Tianqing Liu,Chunli Lu,Dayang Wang,Haolan Xu

DOI: https://doi.org/10.1039/c3cc46738d

IF: 4.9

2013-01-01

Chemical Communications

Abstract:Janus-like emulsions stabilized by OH- and polydopamine (PDA) particles were realized. The OH- and particle occupied areas on emulsion droplet surfaces are spatially separated. Via controlling the pH and ionic strength, the coalescence of Janus-like emulsion droplets could be manipulated.
Synthesis of Janus Particles Via Kinetic Control of Phase Separation in Emulsion Droplets

Bing Liu,Helmuth Moehwald,Dayang Wang

DOI: https://doi.org/10.1039/c3cc45813j

IF: 4.9

2013-01-01

Chemical Communications

Abstract:A reaction-induced phase separation strategy in emulsion droplets has been developed to fabricate non-spherical Janus particles. The final morphology of the resulting Janus particles is controlled by a reaction sequence. These Janus particles are amphiphilic and show regio-selective adsorption orientation at oil/water interfaces.
Janus Nanoparticles by Interfacial Engineering

Sulolit Pradhan,Li-Ping Xu,Shaowei Chen

DOI: https://doi.org/10.1002/adfm.200601034

IF: 19

2007-01-01

Advanced Functional Materials

Abstract:Nanosized Janus particles were prepared by ligand exchange reactions of a Langmuir monolayer of hydrophobic alkanethiolate-passivated gold nanoparticles at relatively high surface pressures with hydrophilic thiol derivatives injected into the water subphase. The ligand intercalation between adjacent particles led to impeded interfacial mobility of the particles. Consequently, ligand place-exchange reactions were limited only to the side of the particles facing the water phase, leading to the formation of amphiphilic nanoparticles which exhibited hydrophobic characters on one side and hydrophilic on the other, analogous to the dual-face Roman god, Janus. The unique amphiphilic characters of the Janus particles were confirmed by a variety of experimental measurements, including contact angle measurements, FTIR, UV-visible, and NMR spectroscopies. Interestingly, the Janus particles might be dispersed in water, forming micelle-like aggregates, as revealed in dynamic light scattering and AFM measurements.
Polystyrene‐Silica Colloidal Janus Particles with Uniform Shapes and Complex Structures

Jianchang Xu,Jichuan Qiu,Haohui Zhang,Yuhang Hu,Younan Xia

DOI: https://doi.org/10.1002/ppsc.202200085

2022-06-15

Abstract:T‐shaped Janus particles are fabricated by swelling the polystyrene (PS) spheroid encapsulated in a shell made of silica (SiO2). As controlled by the intrinsic symmetry of a spheroid, the swollen PS preferentially pokes out from an equatorial site on the SiO2 shell, leading to the generation of Janus particles with complex shapes and controllable structures. Colloidal Janus particles with well‐controlled parameters are sought for a range of applications in mesoscale self‐assembly, stabilization of Pickering emulsion, and development of multifunctional devices, among others. Herein, a versatile method for fabricating polystyrene‐silica (PS‐SiO2) Janus particles featuring complex shapes and structures is developed by swelling PS@SiO2 core–shell spheroids. When the PS encapsulated in a rigid SiO2 shell is swollen by a good solvent for PS, the swelling‐induced pressure will result in an uneven distribution of stress acting on the SiO2 shell, as determined by the intrinsic symmetry of a spheroid. When the stress reaches a threshold value, the swollen PS will preferentially poke out from equatorial sites on the SiO2 shell to form T‐shaped Janus particles comprised of PS and SiO2 compartments. The size of the PS portion can be controlled by varying the extent of swelling, while the size, shape, and shell thickness of the SiO2 portion are determined by the original PS spheroids and the SiO2 coating. This solution‐phase method holds promise to produce Janus particles with diverse shapes, structures, and compositions for various applications. The T‐shaped Janus particles can serve as an emulsifier to effectively stabilize an oil‐in‐water (O/W) Pickering emulsion for at least 35 days.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Swelling‐Induced Symmetry Breaking: A Versatile Approach to the Scalable Production of Colloidal Particles with a Janus Structure

Jichuan Qiu,Zitao Chen,Miaofang Chi,Younan Xia

DOI: https://doi.org/10.1002/anie.202102164

2021-01-01

Angewandte Chemie International Edition

Abstract:Janus particles are widely sought for applications related to colloidal assembly, stabilization of emulsions, and development of active colloids, among others. Here we report a versatile route to the fabrication of well-controlled Janus particles by simply breaking the symmetry of spherical particles with swelling. When a polystyrene (PS) sphere covered by a rigid shell made of silica or polydopamine is exposed to a good solvent for PS, a gradually increased pressure will be created inside the shell. If the pressure becomes high enough to poke a hole in the shell, the spherical symmetry will break while pushing out the swollen PS through the opening to generate a Janus particle comprised of two distinct components. One of the components is made of PS and its size is controlled by the extent of swelling. The other component is comprised of the rigid shell and remaining PS, with its overall diameter determined by the original PS sphere and the rigid shell. This solution-based route holds promises for the scalable production of complex Janus particles with a variety of compositions and in large quantities.
Janus Anisotropic Hybrid Particles with Tunable Size from Patchy Composite Spheres

Chen Tang,Chengliang Zhang,Yijing Sun,Fuxin Liang,Qian Wang,Jiaoli Li,Xiaozhong Qu,Zhenzhong Yang

DOI: https://doi.org/10.1021/ma3020883

IF: 5.5

2013-01-01

Macromolecules

Abstract:We have developed a facile approach to synthesize anisotropic Janus hybrid particles by selective modification of bulgy patches on the composite spheres, which are in situ grown by phase separation during seeded emulsion polymerization. Janus particles are achieved by dissolution of the seed polymer particles. It is the key to control phase separation to form multiple bulges and tune their size by pH and monomer fraction. The size of the Janus particles is continuously tunable from submicrometer to nanometer scale. They can be massively synthesized since many bulges are derived from one seed sphere.
Janus Colloids Formed by Biphasic Grafting at a Pickering Emulsion Interface.

Bing Liu,Wei,Xiaozhong Qu,Zhenzhong Yang

DOI: https://doi.org/10.1002/anie.200705103

2008-01-01

Angewandte Chemie International Edition

Abstract:Angewandte Chemie International EditionVolume 47, Issue 21 p. 3973-3975 Communication Janus Colloids Formed by Biphasic Grafting at a Pickering Emulsion Interface† Bing Liu, Bing Liu State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this authorWei Wei, Wei Wei State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this authorXiaozhong Qu Dr., Xiaozhong Qu Dr. State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this authorZhenzhong Yang Prof., Zhenzhong Yang Prof. [email protected] State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this author Bing Liu, Bing Liu State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this authorWei Wei, Wei Wei State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this authorXiaozhong Qu Dr., Xiaozhong Qu Dr. State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this authorZhenzhong Yang Prof., Zhenzhong Yang Prof. [email protected] State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100080, China, Fax: (+86) 10-6255-9373 http://yangzz.iccas.ac.cn/Search for more papers by this author First published: 06 May 2008 https://doi.org/10.1002/anie.200705103Citations: 169 † We thank Prof. Zhibing Hu of the University of North Texas and Prof. Yunfeng Lu of UCLA for helpful discussions. This work was supported by the NSF (China) (50733004, 50325313, 20128004, and 50521302), CAS, and Chinese MOST (2004-01-09, KJCX2-SW-H07, and 2003CB615600). Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Graphical Abstract A two-faced synthesis: Biphasic grafting at a Pickering emulsion interface leads to the formation of Janus colloids (see scheme; ATRP: atom transfer radical polymerization), which form Janus composite colloids by the preferential growth of desired materials in specific regions of the original colloids. This approach is general and can be extended to the synthesis of a huge family of such colloids. Citing Literature Supporting Information Supporting information for this article is available on the WWW under http://www.wiley-vch.de/contents/jc_2002/2008/z705103_s.pdf or from the author. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article. Volume47, Issue21May 13, 2008Pages 3973-3975 RelatedInformation
Janus Particle Synthesis and Assembly

Shan Jiang,Qian Chen,Mukta Tripathy,Erik Luijten,Kenneth S. Schweizer,Steve Granick

DOI: https://doi.org/10.1002/adma.200904094

IF: 29.4

2010-01-27

Advanced Materials

Abstract:Janus particles, colloid-sized particles with two regions of different surface chemical composition, possess energetic interactions that depend not only on their separation but also on their orientation. Research on Janus and colloidal particles that are chemically patchy in even more complicated fashion has opened a new chapter in the colloid research field. This article highlights recent progress in both experiment and theory regarding synthesis and self-assembly of Janus particles, and tentatively outlines some areas of future opportunity.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Conelike Janus Composite Particles

Hua Zhao,Fuxin Liang,Xiaozhong Qu,Qian Wang,Zhenzhong Yang

DOI: https://doi.org/10.1021/ma502421z

IF: 5.5

2015-01-01

Macromolecules

Abstract:Conelike cross-linked PS particles are polymerized at a patchy emulsion interface. The PS particles synthesized in the dispersed paraffin phase immigrate toward the interface due to the Pickering effect. At the triple phase contact line, the particles are squeezed into cone shape under an outward convex interfacial tension mismatch. The conelike PS particles are adhered to paraffin sphere surface and synchronously protected, which allows selective modifications of the two sides. The Janus particles can self-organize into superstructures in dispersions. Robust coatings are easily fabricated from the Janus particles, whose wettability is tunable from highly adhesive for water to superhydrophobic by simply changing the size distribution of the Janus particles.
Synthesis of dissymmetrical nanoparticles with a new hybrid silica template.

Zhen Meng,Chunyan Xue,Luyao Lu,Bo Yuan,Xuehai Yu,Kai Xi,Xudong Jia

DOI: https://doi.org/10.1016/j.jcis.2011.01.050

IF: 9.9

2011-01-01

Journal of Colloid and Interface Science

Abstract:An easy, novel route to prepare Janus nanoparticles and nano-bowls with tunable shapes has been developed. This approach uses a new kind of monodisperse vinyl-silica nanoparticles as templates to obtain large amounts of uniform Janus particles and nano-bowls (several grams). The efficient method adopts water-based hydrolysis-condensation and seed-emulsion polymerization. The uniform Janus nanoparticles and nano-bowls will display wide potential applications in many fields, such as: chemical sensors, construction of complex superstructures and nano-bioreactors.
Janus Colloidal Copolymers

Peng Zhou,Fuxin Liang,Yijiang Liu,Renhua Deng,Haili Yang,Qian Wang,Xiaozhong Qu,Zhenzhong Yang

DOI: https://doi.org/10.1007/s40843-015-0103-9

2015-01-01

Science China Materials

Abstract:We propose a new type of nanocomposite that we call Janus colloidal copolymers (JCCPs). JCCPs have two different polymers conjugated on opposite sides of a nanosized colloid. Janus clusters of copolymer PS-b-PAA (where PS is polystyrene and PAA is poly(acrylic acid)) are self-organized within confined mesoporous silica channels onto the surface of iron oxide (Fe 3 O 4 ) core particles by coordination-induced adsorption. PScPAA diblock JCCPs are fabricated by selective crosslinking of the nanosized PAA domains. In addition, the crosslinked PAA domains are terminated with amine-capped polyethylene glycol (PEG) to form PS-cPAA-PEG triblock JCCPs. The cPAA domain containing functional groups can serve as a nanoreactor to allow in situ preparation of functional materials. The composite JCCPs combine the functionality of nanosized colloids with the amphiphilic performance and self-organization capability of copolymers.

Janus non-spherical colloids by asymmetric wet-etching.

Natural Halloysites-Based Janus Platelet Surfactants for the Formation of Pickering Emulsion and Enhanced Oil Recovery

Janus Hollow Spheres by Emulsion Interfacial Self-Assembled Sol-Gel Process.

Large Scale Synthesis of Janus Submicron Sized Colloids by Wet Etching Anisotropic Ones

Janus Colloids Toward Interfacial Engineering.

Polymeric Janus Particles with Hierarchical Structures

Large Scale Synthesis of Janus Submicrometer Sized Colloids by Seeded Emulsion Polymerization

Janus Nanoparticles with Tunable Amphiphilicity for Stabilizing Pickering-Emulsion Droplets via Assembly Behavior at Oil-Water Interfaces.

Janus Nanosheets of Polymer-Inorganic Layered Composites

Emulsion Interfacial Synthesis of Asymmetric Janus Particles

Janus-like Pickering emulsions and their controllable coalescence.

Synthesis of Janus Particles Via Kinetic Control of Phase Separation in Emulsion Droplets

Janus Nanoparticles by Interfacial Engineering

Polystyrene‐Silica Colloidal Janus Particles with Uniform Shapes and Complex Structures

Swelling‐Induced Symmetry Breaking: A Versatile Approach to the Scalable Production of Colloidal Particles with a Janus Structure

Janus Anisotropic Hybrid Particles with Tunable Size from Patchy Composite Spheres

Janus Colloids Formed by Biphasic Grafting at a Pickering Emulsion Interface.

Janus Particle Synthesis and Assembly

Conelike Janus Composite Particles

Synthesis of dissymmetrical nanoparticles with a new hybrid silica template.

Janus Colloidal Copolymers