Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Research on Fiber Configuration and Chemical Components of B.pervariabilis×D.Daii

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Role of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride Composites

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Fiber Morphology of Different Bamboo Species and Age

Bamboo fibres sourced from three global locations: A microstructural, mechanical and chemical composition study

BASIC PROPERTIES OF NATURAL BAMBOO FIBER

Chemical Properties and Fiber Morphology of Fargesia fungosa at Different Culm Ages and Heights

Study on the Suitability of Bamboo Fiber for Manufacturing Insulating Presspaper

Comparison on the Preparation Method Function and Structure of Dietary Fiber from Bamboo Shoots

Properties and Applications of Bamboo Fiber–A Current-State-of-the Art

Preparation of fiber raw materials by cooking golden bamboo grass (Arundo donax) with calcified regenerated alkali solution

Analyzing fiber and vascular bundle characteristics, and micro-mechanical properties of Oligostachyum sulcatum

Structure analysis of three non-wood materials for liner paper

Mechanical properties of the fiber cell wall in Bambusa pervariabilis bamboo and analyses of their influencing factors

Observation of the fundamental properties of bamboo pith ring

Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/ epoxy composites

Integrating fiber fractionation and deep eutectic solvent treatment to upgrade a bamboo kraft pulp into a cellulose acetate-grade dissolving pulp

Tunable Physical-Mechanical Properties of Eco-Friendly and Sustainable Processing Bamboo Self-Bonding Composites by Adjusting Parenchyma Cell Content

Analyses on flexural properties and process optimization of bamboo fiber-polypropylene composites for automobile applications