Abstract:An integrated plasma profile control strategy, ARTAEMIS, is being developed for extrapolating present-day advanced tokamak (AT) scenarios to steady-state operation. The approach is based on semi-empirical modelling and was initially explored on JET (Moreau et al 2008 Nucl. Fusion 48 106001). This paper deals with the general applicability of this strategy for simultaneous magnetic and kinetic control on various tokamaks. The determination of the device-specific, control-oriented models that are needed to compute optimal controller matrices for a given operation scenario is discussed. The methodology is generic and can be applied to any device, with different sets of heating and current drive actuators, controlled variables and profiles. The system identification algorithms take advantage of the large ratio between the magnetic and thermal diffusion time scales and have been recently applied to both JT-60U and DIII-D data. On JT-60U, an existing series of high bootstrap current (∼70%), 0.9 MA non-inductive AT discharges was used. The actuators consisted of four groups of neutral beam injectors aimed at perpendicular injection (on-axis and off-axis), and co-current tangential injection (also on-axis and off-axis). On DIII-D, dedicated system identification experiments were carried out in the loop voltage (V ext) control mode (as opposed to current control) to avoid feedback in the response data from the primary circuit. The reference plasma state was that of a 0.9 MA AT scenario which had been optimized to combine non-inductive current fractions near unity with 3.5 < βN < 3.9, bootstrap current fractions larger than 65% and H 98(y,2) = 1.5. Actuators other than V ext were co-current, counter-current and balanced neutral beam injection, and electron cyclotron current drive. Power and loop voltage modulations resulted in dynamic variations of the plasma current between 0.7 and 1.2 MA. It is concluded that the response of essential plasma parameter profiles to specific actuators of a given device can be satisfactorily identified from a small set of experiments. This provides, for control purposes, a readily available alternative to first-principles plasma modelling.

Edge Plasma Modelling for Ht-7 Superconducting Tokamak Experiments

Modelling of Edge Plasma on Jt-60u Tokamak by Using Solps5.0 Code

Edge Plasma Modelling For Transport Analysis On Jt-60u Tokamak

TH/P2-32 Gyrokinetic Simulation of Tokamak Edge Plasmas

Toward a First-Principles Integrated Simulation of Tokamak Edge Plasmas

Modelling of Edge Plasma Transport During H-Mode of East by Solps5.0

Data-Driven Modeling and Feedback Tracking Control of the Toroidal Rotation Profile for Advanced Tokamak Scenarios in Diii-D

Plasma Models for Real-Time Control of Advanced Tokamak Scenarios

Turbulence and Transport Studies in the Edge Plasma of the HT-7 Tokamak

MEASUREMENT OF EDGE PLASMA PARAMETERS AND THEIR ELECTROSTATIC FLUCTUATIONS ON THE HT-7 SUPERCONDUCTING TOKAMAK

Divertor Modelling for the Design of the Ht-7u Tokamak

Modelling Studies Of Sol-Divertor Plasmas In East Tokamak With Ohmic Shots

Simulation of EAST edge plasma using SOLPS-ITER/BOUT plus plus coupling

Recent progress on steady-state high-performance plasma research in the Hefei Tokamak-7

Studies of high confinement plasma with lower hybrid current drive in the HT-7 superconducting tokamak

Modelling Studies Of Sol-Divertor Plasmas In East Tokamak With High Heating And Current Driving Power

Quasi-Steady-State Ac Plasma Current Operation in Ht-7 Tokamak

PSI issues toward steady state plasmas in the HT-7 tokamak

High Density Operation on the HT-7 Superconducting Tokamak

Long Pulse Enhanced Confinement Discharges in the HT-7 Superconducting Tokamak by Ion Bernstein Wave Heating and Lower Hybrid Wave Current Drive

Modelling studies of SOL-divertor plasmas in EAST toKoćamak with ohmic shots