Abstract:Large or carcinogenic bone defects may require a challenging bone tissue scaffold design ensuring a proper mechanobiological setting. Porosity and biodegradation rate are the key parameters controlling the bone-remodeling process. PLA presents a great potential for geometrically flexible 3-D scaffold design. This study aims to investigate the mechanical variation throughout the biodegradation process for lattice-type PLA scaffolds using both experimental observations and simulations. Three different unit-cell geometries are used for creating the scaffolds: basic cube (BC), body-centered structure (BCS), and body-centered cube (BCC). Three different porosity ratios, 50 %, 62.5 %, and 75 %, are assigned to all three structures by altering their strut dimensions. 3-D printed scaffolds are soaked in PBS solution at 37 °C for 15, 30, 60, 90, and 120 days both unloaded and under dead load. Water absorption, weight loss, and compression stiffness are measured to characterize the first-stage degradation and investigate the possible influences of these parameters on the whole biodegradation process. The strength reduction stage of biodegradation is simulated by solving pseudo-first-order kinetics-based molecular weight change equation using FEA with equisized cubic (voxel-like) elements.For the first stage, mechanical load does not have a statistically significant effect on biodegradation. BCC with 62.5 % porosity shows a maximum water absorption rate of around 25 % by the 60th day which brings an advantage in creating an aquatic environment for cell growth. Results indicate a significant water deposition inside almost all scaffolds and water content is determined to be the main reason for the retained or increased compression stiffness. A distinguishable stiffness increase in the initial degradation process occurs for 75 % porous BC and 50 % porous BCC scaffolds. Following the quasi-stable stage of biodegradation, almost all scaffolds lost their rigidity by around 44–48 % within 120 days based on numerical results. Therefore, initial stiffness increase in the quasi-stable stage of biodegradation can be advantageous and BCC geometry with a porosity between 50% and 62 % is the optimum solution for the whole biodegradation process.

Degradable Performance and Bio-Mineralization Function of PLA-PEG-PLA/PLA Tissue Engineering Scaffold in SBF

Mechanical Properties and Degradation Properties in Vitro of Carbon Fiber Reinforced Hydroxyapatite/polylactide Composite

Biosoluble ceramic fiber reinforced poly(L-lactic acid) bone scaffold: degradation and bioactivity

Degradation mechanisms and acceleration strategies of poly (lactic acid) scaffold for bone regeneration

In vitro degradation of porous PLLA/pearl powder composite scaffolds

Degradation of 3D-Printed Porous Polylactic Acid Scaffolds Under Mechanical Stimulus

In Vitro Degradation and Release Behavior of Porous Poly(lactic Acid) Scaffolds Containing Chitosan Microspheres As a Carrier for BMP-2-derived Synthetic Peptide

Accelerated degradation of poly(l-lactide) bone scaffold: Crystallinity and hydrophilicity

Mechanical deviation in 3D-Printed PLA bone scaffolds during biodegradation

Additive manufacturing and in vitro study of biological characteristics of sulfonated polyetheretherketone-bioactive glass porous bone scaffolds

In vitro and in vivo degradability and cytocompatibility of poly(l-lactic acid) scaffold fabricated by a gelatin particle leaching method.

DEGRADATION STUDY OF POLY(LACTIC ACID) POROUS SCAFFOLD AT DIFFERENT TEMPERATURES

Effects of ceramic additives and bioactive coatings on the degradation of polylactic acid‐based bone scaffolds under hydrolytic conditions

In Vitro and in Vivo Degradability and Cytocompatibility of Poly(l-Lactic Acid) Scaffold Fabricated by a Gelatin Particle Leaching Method

PLA tissue-engineered scaffolds loaded with sustained-release active substance chitosan nanoparticles: Modeling BSA-bFGF as the active substance

Preparation and in vitro degradation of porous three-dimensional silk fibroin/chitosan scaffold

A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair

3D Biocompatible Polyester Blend Scaffolds Containing Degradable Calcium Citrate for Bone Tissue Engineering

Manufacture and characteristics of HA-Electrodeposited polylactic acid/polyvinyl alcohol biodegradable braided scaffolds

Synthesis, characterization, and bioactivity investigation of biomimetic biodegradable PLA scaffold fabricated by fused filament fabrication process

Effects of Porosity and Pore Size on in Vitro Degradation of Three-Dimensional Porous Poly(d,l-Lactide-co-glycolide) Scaffolds for Tissue Engineering.