Abstract:A compact polarization beam splitter based on a triple-waveguide plasmonic directional coupler is proposed and modeled. The directional coupler consists of two usual lithium-niobate-on-insulator (LNOI) ridge waveguides and a metal-capped plasmonic LNOI waveguide located between them. It utilizes stronger polarization dependence of modal birefringence of a plasmonic waveguide. By appropriately designing the plasmonic waveguide geometry, the TM component wave meets the resonant coupling condition and outputs at cross port. Instead, the TE component wave does not meet the resonant coupling condition, cannot be resonant in the triple-waveguide directional coupler and outputs at through port directly. Excellent performance is expected for an optimal device. First, the device shows an ultra-high polarization extinction ratio(PER) of 28.3 dB and an ultra-low insertion loss(IL) of 0.06 dB for the TE-polarized wave, and of 31.7 dB and of 0.31 dB in order for the TM-polarized wave. Second, the working bandwidth with PER > 25 dB and IL < 0.08 dB is 100 nm (1500-1600 nm) for the TE-polarized wave, and that with PER > 20 dB and IL < 0.4 dB is 30 nm (1534-1564 nm) for the TM-polarized wave. Third, the device has a compact structure of 33 mu m in length and exhibits definite fabrication tolerance. Overall, the proposed device exhibits ultra-high PER and ultra-low IL, and has a compact size suitable for on-chip use. A comparison shows that present device exhibits advantage in IL and/or size over that based on other LNOI structures or the SOI platform.

Design and fabrication of a three-dimensional polymer optical waveguide polarization splitter

Design of Wide-Angle and Broad-Band Two-Dimensional Photonic Crystal Polarization Splitter by the Automatic Shaping Mechanism

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Polarization-dependent Plasmonic Splitter Based on Low-Loss Polymer Optical Materials

A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios

Improved Inverse Design of Polarization Splitter with Advanced Bayesian Optimization

A Polarization Insensitive Three-Dimensional Waveguide Interleaver

Realization of a Compact Broadband Polarization Beam Splitter Using the Three-Waveguide Coupler

High-efficiency Polarization Beam Splitters Based on a Two-Dimensional Polymer Photonic Crystal

Polarization Splitter with Hybrid Plasmonic Waveguide

Polarization Splitter Based on Three-Core Photonic Crystal Fiber with Rectangle Lattice

Design of a New Kind of Polarization Splitter Based on Transformation Optics

Compact Polarization Beam Splitter Based on Metal-Capped Thin-Film LiNbO3-on-insulator Plasmonic Waveguide

Broadband Polarization Beam Splitter Based on A Tapered Mismatched Directional Coupler

Novel Approach for Controllable Polarization Beam Splitter: Design and Simulation

Design of Short Polarization Splitter Based on Dual-Core Photonic Crystal Fiber with Ultra-High Extinction Ratio

Design and Analysis of Polarization Splitter Based on Dual-Core Photonic Crystal Fiber

Ultra-small and Broadband Polarization Splitters Based on Double-Slit Interference

Compact TE/TM polarization splitters for 1.31 and 1.55 μm wavelengths in LiNbO3 photonic wires

PCF-based Polarization Splitters with Simplified Structures

Design of Optical Polarization Splitters in a Single-Section Deeply Etched MMI Waveguide