Abstract:In order to study the high-speed penetration effect of a structural projectile on a reinforced concrete target, tests of structural projectiles with high velocity penetrating into reinforced concrete target were carried out by using a 35mm-caliber ballistic gun as a launching tool, and the penetration velocity of the projectiles ranges from 1030 m/s to 1520 m/s. The test data of the deformation and failure form, remaining length and remaining mass of the projectiles were obtained through detailed measurement of the recovered projectile. The macro-damage of the targets, the penetration depth and crater size of the target bodies were also obtained. Based on the experimental data, the changes of the projectile structure response, penetration of the dimensionless crater depth, and dimensionless crater diameter with penetration velocity were analyzed. According to the deformation and destruction of the projectiles during the penetration process, the penetration depth and penetration mechanism change with penetration velocity were analyzed, and the partition of the penetration velocity was discussed. The results show that, in the penetration velocity ranges from 1030 m/s to 1390 m/s, the heads of the projectiles are eroded, and the degree of erosion increases with the increase in penetration velocity, and the penetration depth increases approximately linearly with the penetration velocity. When the penetration velocity is in the range of 1390−1480 m/s, the heads of the projectiles are severely eroded, and the penetration depth decreases as the penetration velocity increases. When the impact velocity is higher than 1480 m/s, the projectile bodies are severely broken, and the penetration depth decreases sharply as the penetration velocity increases. According to the damage characteristics of the structural projectiles during high-speed penetration, the penetration velocity is divided into rigid body penetration zone, quasi-rigid body penetration zone, eroded body penetration zone and broken body penetration zone, which can provide a reference for the structural design of ground-penetrating projectile.

Dependence of penetration velocity on impact velocity at quasi-steady stage

Effect of Impact Velocity on the Penetration Behavior for Long-Rod Penetrator Vertically Penetrating Semi-Infinite Target

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Analysis of the velocity relationship and deceleration of long-rod penetration

Study on Effect Mechanism of Aspect Ratio for Vertical Penetration of a Long-Rod Projectile

Influence of the cross-section shapes of long rod projectile on the vertical penetration depth

The Study on Rate-dependent Similarity Law of High Velocity Penetration into Concrete Target

Experimental and theoretical study on steel long-rod projectile penetration into concrete targets with elevated impact velocities

Influence of the Movement of Cylindrical Target Plate on the Penetrating Ability of Kinetic Energy Projectile

The Influence of Impact Speed on the Penetrator with Enhanced Lateral Effect

The Study on Penetration of Constant Kinetic Energy Long-rod Penetrator and Optimal Design

Investigation on the penetration of jacketed rods with striking velocities of 0.9–3.3 km/s into semi-infinite targets

Influence Factors on Penetration Effciency for Long-rod Projectile Vertically Pentrating Semi-infinite Target and Its Rules

Experimental research on the mechanism of a high-velocity projectile penetrating into a reinforced concrete target

Study on Penetration of Concrete Targets by Ogive-Nose Steel Projectile

PENETRATION ANALYSIS OF LONG ROD PROJECTILES ON ROCK TARGETS

Study on the Penetration Characteristics of WFeNiMo High-Entropy Alloy Projectile Impacting Steel Target at High Speed

SIMULATION ANALYSIS OF HIGH VELOCITY PENETRATION INTO CONCRETE TARGET

Effect of Nose Shape on Penetration Performance of Long-rod Penetrator and Its Mechanism

Oblique Penetration of Tungsten Alloy Rod to Finite-Thickness Metal Plate