Abstract:A numerical model is developed to investigate the deformations and stress distribution of floating pipes of fish cage subjected to the flow. The modelling approach is based on the combination of the finite element method using the shell element to simulate the floating pipes and the hydrodynamic model improved from the Morison's equation and lumped-mass method. The hydrodynamic response of the fish cage and forces on the floating pipes can be obtained by the hydrodynamic model. The stress and deformation of the floating pipes can be calculated based on the finite element method. Employing an appropriate iterative scheme, the stress distribution and maximum stress of the floating pipes in high currents can be obtained using the proposed model. To validate the numerical model, the numerical results were compared with the data obtained from corresponding physical model tests. The comparisons show that the numerical results agree well with the experimental data. On that basis, the simulations of fish cage in currents were performed to investigate the maximum deformation and the stress distribution of the floating collars. Simulations of the fish cage in different flow velocity are performed to analyse the effect of the net and flow velocity on the deformations and stress of the floating pipes. The simulation results show that the stress and deformations drastically increase with the increase of flow velocity and the net has great influence on the stress distribution. Comparing results of floating pipes with different mooring line arrangements indicates that increasing mooring lines can efficiently lower the stress of the floating pipes. The simulations of the single-point mooring cage system with multiple net cages in current are performed and the results show that the middle cage is most dangerous for the tripartite-cage system.

Numerical Investigation of Hydrodynamic Properties of Gravity Cage for Flat-Fish Culture During Exposure to Wave Action

Numerical Modeling of Current Loads on a Net Cage Considering Fluid–structure Interaction

Assessment of Particle Waste Distribution of Traditional Marine Cages Farming in China: Using a 3D CFD Simulation Model

Hydroelastic Responses of a Circular Net Cage Under Wave Action

Hydrodynamic response research of a cage system under waves and currents based on modal analysis

Numerical Analysis Of The Flotation Ring Of A Gravity-Type Fish Cage

A Numerical Analysis on the Hydrodynamic Characteristics of Net Cages Using Coupled Fluid–structure Interaction Model

A Study on the Hydrodynamic Response Characteristics of Vessel-Shaped Cages Based on the Smoothed Particle Hydrodynamics Method

The Numerical Simulation of Hydrodynamics of Fishing Net Cage

Numerical Simulation of the Effects of Fish Behavior on Flow Dynamics Around Net Cage

Comparative Study of Dynamics of Gravity Cages with Different Meshes in Waves and Current

Numerical study on the flow environment for a novel design of net cage with a shielding device

A Numerical Study on Dynamic Properties of the Gravity Cage in Combined Wave-Current Flow

Hydrodynamic Analysis of Deep-Water Fish Cage in Waves Based on Two Different Methods

Motion of Float Collar of Gravity Fish Cage

Numerical Study of A Self-Submersible Single-Point Mooring Gravity Cage in Combined Wave-Current Flow

Deformation and Stress Distribution of Floating Collar of Net Cage in Steady Current

Hydroelasticity Analysis of a Vessel-Shaped Fish Cage under Incident, Diffraction and Radiation Wave Fields

Experimental Investigation on Hydrodynamic Coefficients of a Column-Stabilized Fish Cage in Waves

Hydroelasitic Analysis of the Gravity Cage Subjected to Irregular Waves and Current

Hydrodynamic Response Analysis of a Fixed Aquaculture Platform with a Horizontal Cylindrical Cage in Combined Waves and Currents