Abstract:Digital Image-based Elasto-Tomography (DIET) is an emerging technology for non-invasive breast cancer screening. This technology actuates breast tissue and measures the surface motion using digital imaging technology. The internal distribution of stiffness is then reconstructed using Boundary Element or Finite Element Methods (FEM or BEM). However, obtaining accurate imaging at high frequency and high resolution in terms of numbers of pixels is challenging if enough accuracy is to be obtained in the motion sensing to deliver a useful result. The overall focus of such mechatronic and digitally centred systems is on providing a low-cost, radiation dose-free and portable screening system capable of screening numerous patients per day - in direct contrast to current low throughput, non-portable and high cost x-ray and MRI based approaches.Thus, DIET technology relies on obtaining high resolution images of a breasts surface under high frequency actuation, typically in the range of 50-100Hz. Off-the-shelf digital cameras and imaging elements are unable to capture images directly at these speeds. A method is presented for obtaining the required high speed image capture at a resolution of 1280x1024 pixels and actuation frequency of 100Hz. The prototype apparatus presented uses two imaging sensors in combination with frame grabbers and a dSpace (TM) control system, to produce an automated image capture system. The system integrates a precision controlled strobe lighting system to selectively capture sinusoids at different points in the sinusoidal cycle of response.The final working system produced images that enabled effective 3D motion tracking of the surface of a silicon phantom actuated at 100Hz. The surface of the phantom was strobed at pre-selected phases from 0 to 360 degrees, and an image was captured for each phase. The times at which image capture occurred were calculated for a phase lag increment of 10 degrees resulting in an image effectively every 0.00028s for the actuator cycle of 0.01s. The comparison of the actual trigger times and pre-selected ideal trigger times gave a mean absolute error of 1.4%, thus demonstrating the accuracy of the final system.Final validation is performed using this system to track motion in a silicon get phantom. The motion is tracked accurately using a novel Euclidean Invariant signature method. Both cameras delivered similar results with over 90% of points tracked to within 1-2%. This level of accuracy confirms the ability to effectively accurately reconstruct the stiffness as validated in other related studies.Over 90% of points in the images from both cameras were tracked successfully. Based on an estimate of the calibration accuracy of the cameras, the accuracy of tracking amounted to between 1-2% of the amplitude response for the silicon phantom.

A Flexible and Configurable Hardware for the Combined EIM and Ultrasound Device

The flexible and configurable Sussex EIM MK4 using PCI eXtensions for Instrumentation (PXI)

A Wideband Contactless Electrical Impedance Tomography System

A Flexible Low-Cost, High-Precision, Single Interface Electrical Impedance Tomography System for Breast Cancer Detection Using FPGA

Further Investigation of a Contactless Patient-Electrode Interface of an Electrical Impedance Mammography System

Multi-Modal Finite Element Modelling for Enhanced Breast Cancer Detection using Electrical Impedance Tomography and Ultrasound Tomography

Arbitrary geometry patient interfaces for breast cancer detection and monitoring with electrical impedance tomography

Modular and Portable System Design for 3D Imaging of Breast Tumors Using Electrical Impedance Tomography

EIT system for breast cancer detection

Planar Array Electrical Impedance Tomography System Evaluation for Breast and Abdomen Detection

Breast cancer detection using high-density flexible electrode arrays and electrical impedance tomography

Signal calibration for an Electrical Impedance Mammography system

Specialised Image Capture Systems For A Diet Breast Cancer Screening System

Development of ClearPEM-Sonic, a Multimodal Mammography System for PET and Ultrasound

An image reconstruction algorithm for 3-D electrical impedance mammography.

A New Symmetric Semi-Parallel Electrical Impedance Tomography (EIT) System - I: the Design

Using Electrical Impedance Tomography and Machine Learning for Breast Cancer Detection

A 9.6-mW/Ch 10-MHz Wide-Bandwidth Electrical Impedance Tomography IC With Accurate Phase Compensation for Early Breast Cancer Detection

A High-Resolution 3D Ultrasound Imaging System Oriented towards a Specific Application in Breast Cancer Detection Based on a 1 √ó 256 Ring Array

Development of a novel, dual-modality image guidance system by combining a focused gamma probe with ultrasound imaging

Parametric Image: A Step Forward For Virtual Biopsy By Eit?