Abstract:For the fabrication of high-strength carbon nanotube (CNT) reinforced Al matrix composites, the uniform dispersion, strong interface bonding and high structural integrity of CNTs have been regarded as the three most important issues. In this work, two distinct approaches, namely high shear dispersion (HSD) and shift-speed ball milling (SSBM), were applied to disperse CNTs (1.5 wt%) into pure Al powders. These two kinds of CNT/Al composite powders as well as the pure Al powder (as a comparison) were deposited onto stainless steel plates by cold spraying using different processing parameters. The velocity and the temperature of the particle prior to impact was simulated by the commercial code of Fluent. The deposition efficiency, microstructure evolution, as well as the distribution and structural integrity of CNTs in the composite coatings produced from different starting powders were comparatively investigated in terms of X-ray diffraction (XRD), Raman spectra, and electron back scanning diffraction (EBSD). According to the XRD and Raman analysis, no new phases such as oxides or brittle Al4C3 were detectable in both CNT/Al composite coatings. Some structural damages of CNTs were found in both composite coatings, especially the one fabricated from HSD composite powder. The dispersion of CNTs onto Al particle surfaces by HSD approach did not achieve a significant strengthening effect on the composite coatings, but adversely affected the metallic bonding of the particles and the substrate. The microhardness of the CNT/Al composite coating produced from SSBM powders reached around ~115 HV0.1, showing a significant improvement compared to the pure Al coating mainly due to the grain refinement and CNTs strengthening.

Fabrication of Cross-Linked Multi-Walled Carbon Nanotube Coatings with Improved Adhesion and Intrinsic Strength by a Two-Step Synthesis: Electrochemical Deposition and Hyperthermal Proton Bombardment

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Developing multi-wall carbon nanotubes/Fusion-bonded epoxy powder nanocomposite coatings with superior anti-corrosion and mechanical properties

Fabrication of robust conductive and superhydrophobic coating based on carbon nanotubes

Preparation of Aluminum Oxide-Coated Carbon Nanotubes and the Properties of Composite Epoxy Coatings Research

Electrophoretic Deposition of Multi‐Walled Carbon Nanotubes: The Key Role of Plasma Functionalization and Polymerization

Superior Cell Adhesion and Antithrombogenicity Supported by N+-bombarded Carbon Nanotubes

Synthesis and characterization of nickel–cobalt spin coatings reinforced with carbon nanotubes: microstructural properties, microhardness, and corrosion resistance

Mechanical Strength Improvements of Carbon Nanotube Threads through Epoxy Cross-Linking

Multiwall Carbon Nanotubes-Reinforced Epoxy Hybrid Coatings with High Electrical Conductivity and Corrosion Resistance Prepared Via Electrostatic Spraying

Improvement of the mechanical properties of single-walled carbon nanotube networks by carbon plasma coatings

Electrodeposition and Mechanical Characterization of Ni-carbon Nanotubes Composite Coatings

Improving Electrical, Mechanical, Thermal and Hydrophobic Properties of Waterborne Acrylic Resin-Glycidyl Methacrylate (GMA) by Adding Multi-Walled Carbon Nanotubes

Coating of multiwalled carbon nanotubes with crosslinked silicon-containing polymer

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition

Fabrication and characterization of CNT-reinforced Ni-Co composite coatings: microstructural evolutions and corrosion behavior

A Modified Spray-Winding Approach to Enhance the Tensile Performance of Array-Based Carbon Nanotube Composite Films

Fabricating Ultrastrong Carbon Nanotube Fibers via a Microwave Welding Interface

Synthesis of Carbon Nanotube Reinforced Al Matrix Composites Via Cold Spray Deposition

Fabrication Of Multi-Walled Carbon Nanotubes/Nickel Nano-Composite Films By Electrochemical Processing