Abstract:It is one of the important requisites in the engine mounting system design to accurately determine the inertia properties of a powertrain rigid body. Observing that trifilar torsional pendulum can precisely measure mass moment of inertia of complex rigid body, an experimental methodology for inertia parameter identification is proposed, in which the rigid body is positioned at 6~9 different orientations represented with three-points on the rigid body. The key points include: (1) the orientation of the rigid body is indirectly determined with three points on the rigid body, and a movable coordinate system is defined with the normal vector of plane formed by the three on-body points; (2) distances between the three on-body points and reference points on the pendulum plate (defining a global coordinate system) are measured for each test, and global coordinates of the three on-body points and the coordinate transformation between the two coordinate frames are determined；(3) the rotation axis orientation of the rigid body and the moment of inertia for each test under the movable coordinates are calculated; and (4) utilizing least square principle, the optimal intersection “point” of the rotation axis of each test is determined to be the center of gravity, and then a set of linear equations derived from the transformation formula of rigid-body moment of inertia about different axis rotation is solved to identify inertia tensor of the rigid body. Some factors that may produce errors still exist in the proposed identification procedure, but they can be estimated and effectively reduced at every step with least square method. The practicability and reliability of the procedure is illustrated by error analysis, validation of cuboid mass block and many tests of real powertrains.

Measure Inertial Mass with the Method of Gas-track System and Spss

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Novel Measurement Method for Determining Mass Characteristics of Pico-Satellites

Research on the Modeling, Control, and Calibration Technology of a Tracked Vehicle Load Simulation Test Bench

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

Calibrate the Gravity Acceleration by Improved Pendulum Experiment System and SPSS

Astronaut Mass Measurement Using Linear Acceleration Method and the Effect of Body Non-Rigidity

Calibration method of strapdown inertial measurement unit based on two-axis turntable

A Proposal For Absolute Determination Of Inertial Mass By Measuring Oscillation Periods Based On The Quasi-Elastic Electrostatic Force

Mass properties identification and automatic mass balancing system for satellite attitude dynamics simulator

An Algorithm of Inertial Measurement System

The NIM Inertial Mass Measurement Project.

Determining the Eccentricity of Source Masses in the Measurement of Newtonian Gravitational Constant Using an Air-Bearing Method

An Improved Fast Self-Calibration Method for Hybrid Inertial Navigation System under Stationary Condition

IMPROVEMENT OF EXPERIMENTAL IDENTIFICATION METHOD WITH TRIFILAR TORSIONAL PENDULUM FOR INERTIA PROPERTIES OF LARGE-SCALE RIGID-BODY

Analysis on measurement accuracy of MEMS inertial height gauge

Modeling And Experimental Study On Characterization Of Micromachined Thermal Gas Inertial Sensors

An effective approach to identify the mass properties of a satellite attitude dynamics simulator

Progress of the Inertial Mass Measurement Project at NIM

Systematic Research on Measuring Acceleration of Gravity by Laser Interferometry

A new method to identify the mass parameters of spacecraft