Abstract:This article theoretically analyzes and conducts three-dimensional particle-in-cell simulations of mode competition in an overmoded relativistic backward wave oscillator. Based on the quality factor and coupling impedance, it achieves mode selection for a TM 02 mode backward wave oscillator, and optimizes its output power and magnetic field strength in the simulation. The quality factor is related to the group velocity and end reflection of each mode. The dispersion curves of some non-axisymmetric modes are very close, and the group velocities are basically equal. Therefore, the end reflection needs to be considered to distinguish the quality factors of different modes. In frequency domain simulation, analyzing the quality factor of each mode using the S 11 parameter curve can avoid calculating the end reflection. The three-dimensional simulation results show that the coupling impedance and quality factor jointly affect the operating mode. When the coupling impedance advantage of the working mode is not obvious, changing the resonant frequency of the high-frequency structure can affect the beam-wave interaction process, thereby changing the excitation mode. When the advantage is obvious, the beam-wave interaction of the excitation mode will not be destroyed by the resonant mode, and the output of other modes of microwave mainly comes from the conversion of the same frequency mode. Due to the constant dispersion curve, the effect of resonance on the mode is essentially the effect of the quality factor on the mode dominated by the end reflection. Using the insensitive parameters and the electron beam radius obtained from the simulation as the optimization parameters, automatic optimization algorithm was used in combination with the two-dimensional simulation to perform multi-objective optimization design in the above device. The final output power of the backward wave oscillator reached 534 MW, with an efficiency of 23.64%, an increase of 221.7% compared to the original device. The device operating mode remains stable, with the power ratio of TM 02 mode reaching 94.95%.

Propagating Quasi-Te Modes in A Vacuum Axisymmetric Corrugated-Wall Waveguide

A New Improved Wkb Solution Of The Symmetrical Multiple Quantum Wells Planar Waveguide

The modes in the stepped parallel waveguide excited by the slant incident waves

Experimental Study of A High-Power Backward-Wave Oscillator Operating Far from the Upper Cutoff

Modes Trimming and Clustering in a Weakly Perturbed High‐Q Whispering Gallery Microresonator

Analysis of multimode radiation from 0.4 THz backward wave oscillator

Sound Transmission Within the Bragg Gap Via the High-Order Modes in A Waveguide with Periodically Corrugated Walls

Linear Analysis of a Backward Wave Oscillator with Coaxial Slow Wave Structure

Coupled mode theory analysis of mode-splitting in coupled cavity system.

Diffraction of a symmetric TM mode at an open-ended deeply corrugated waveguide with a small period

Propagation Characteristic Analysis and Applications of Spatial Four-Waveguide System

Linear Dispersion Relation of Double Period Slow Wave Structure for High-Power Backward Wave Oscillators

Resonant Enhancement of Radiation from a Backward Wave Oscillator Utilizing Large Diameter Corrugated Metal Structure

Starting Current of Coaxial Relative Backward Wave Oscillator

Transmission Characteristics Analysis of a Twin-Waveguide Cavity

Circular TE0 n Mode Content Analysis Technique for High-Power Gyro-TWT System

Parametric modelling of the lossy folded waveguide circuits for the 220 GHz backward wave oscillator

Study of A W-Band Te62 Mode Generator by the Waveguide Mode Transformation

Spatiotemporal solitary modes in a twisted cylinder waveguide pipe with the self-focusing Kerr nonlinearity

Research on the influence of quality factor on operating mode of TM 02 mode relativistic backwave oscillator

Quasi-TEM modes in rectangular waveguides: a study based on the properties of PMC and hard surfaces