Abstract:This study investigates the precipitation kinetics and strengthening mechanisms of a 450 MPa grade Nb-bearing high strength low alloyed steel. The results reveal that Nb(C, N) and NbC particles with a mean size of 8.2 nm, are distributed in grain interior and grain boundaries (GBs). There are two predominant precipitation morphologies in the grain interior, namely disc-like and spherical shapes. The former precipitated in ferrite and the latter precipitated in high-temperature austenite, relying on the Baker-Nutting and Cube-Cube orientation relationships (ORs), respectively. The particle ratio of disc-like NbC precipitates varied from 1.75 to 2.36, which was consistent with the theoretical particle ratio of about 2.43. Besides, NbC or Nb(C, N) particles with a nearly disclike morphology were found along GBs, also exhibiting the Baker-Nutting OR with ferrite. Thermodynamic calculations indicated that 39 ppm nitrogen increased the precipitation temperature by about 44 degrees C. Moreover, under heavy hot-rolling reduction, a significant fraction of Nb(C, N) and NbC precipitated in austenite. Precipitation kinetics analysis reveals that both the resultant heightened deformation stored energy (DSE) and trace nitrogen effectively accelerated the nucleation and growth transformation. The high DSE facilitated the strain induced precipitation in austenite, which presented a linear precipitation distribution. With the increased DSE, both the precipitation-temperature-time curve and nucleation rate time curve shifted towards higher temperature and shorter time. Eventually, NbC and Nb(C, N) particles induced strengthening contribution was estimated to be approximately 84 MPa. The main strengthening contributions in the material include grain boundary and solution strengthening.

Strain-Induced Precipitation Of Nb(Cn) During Deformation Of Undercooled Austenite In Nb-Microalloyed Hsla Steels

Study of Transformation Characteristics and Nano-Scale Precipitation in Nb Microalloyed Steel

Investigation on Dissolving and Strain Induced Precipitation Behavior in Nb-Bearing Microalloyed Steel

Characteristics of Microstructural Evolution During Deformation-Enhanced Ferrite Transformation in Nb-microalloyed HSLA Steel

Microstructure evolution during deformation-enhanced transformation in Nb-microalloyed steel

Effect of Nb on deformation-enhanced ferrite transformation in low carbon steel

Quantitative Investigation of Deformation Induced Precipitation in Coarse Grained Austenite Htp Steel

Revealing the Precipitation Kinetics and Strengthening Mechanisms of a 450 MPa Grade Nb-bearing HSLA Steel

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Precipitation Behavior of Nb in Hot-Rolled Nb-microalloyed TRIP Steel During High-Temperature Deformation

Strain-induced Precipitation Kinetics of Nb(C,N) and Precipitates Evolution in Austenite of Nb–Ti Micro-Alloyed Steels

Effect of Nb on the Transformation Kinetics of Low Carbon (manganese) Steel During Deformation of Undercooled Austenite

Effect of Dissolution and Precipitation of Nb on the Formation of Acicular Ferrite/bainite Ferrite in Low-Carbon HSLA Steels

Strain Induced Precipitation in a Multi-Microalloyed Steel Containing Nb and Ti During RPC Processing

Recrystallization, Precipitation Behaviors, and Refinement of Austenite Grains in High Mn, High Nb Steel

Microstructure Evolution During Reheating of A Nb-Bearing Steel - Ii. Dislocation-Precipitate Interaction

A Study on Cu and Nb Precipitation During High Temperature Tempering in Low Carbon Steels

EFFECTS OF Nb ON RECOVERY OF HOT--DEFORMED AUSTENITE

Precipitation Behavior of Nb in Steel under Ultra Fast Cooling Conditions

Effect of Nb on Low-Carbon Si-Mn Steel During Continuous Cooling Transformation

Precipitate Evolution in 22Cr25NiWCuCo(Nb) Austenitic Heat-Resistant Stainless Steel during Heat Treatment at 1200 °C