Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The steady-state fluid dynamic force of the cone valve core reduces the stability of the cone valve, thereby affecting its vibration characteristics. This study first derived the formula for calculating the steady-state fluid dynamic force of the valve core using the momentum theorem. Then, the study used the Computational Fluid Dynamics (CFD) method to explore the variation of steady-state fluid dynamic force with the opening degree of the cone valve and the pressure difference at the inlet and outlet. The study also analyzed the steady-state fluid dynamic force of the improved structure cone valve. Combining the CFD calculation results with the established axial vibration and dynamic models of the valve core spring system, a system dynamics simulation model was developed. Innovatively, the study combined experimental and simulation methods to investigate the vibration characteristics of the cone valve and the impact of steady-state fluid dynamic force on these characteristics. The experimental results aligned well with the simulation results, showing that the influence of steady-state fluid dynamic force on vibration characteristics is similar to that of spring force. At a small opening degree, the compensation structure of steady-state fluid dynamic force can reduce axial vibration amplitude. Increasing the inlet pressure from 2.0 MPa to 2.5 MPa results in a decrease in axial amplitude and an increase in the numerical value of the vibration balance position. Increasing the outlet pressure from 0.5 MPa to 0.9 MPa initially decreases axial amplitude and axial waveform factor, followed by an increase. Increasing the spring preload from 9.4 mm to 13.4 mm leads to a decrease in the numerical value of the balance position, a reduction in amplitude, and a decrease in the waveform factor of the axial vibration of the valve core. The study reveals systematic effects of inlet pressure, outlet pressure, and spring preload on the vibration characteristics of the cone valve. The research results in this paper can provide theoretical support for the structural design of hydraulic valves, reduce the impact of fluid dynamics on vibration, and thereby improve the stability of hydraulic system operation.

Simulation Study on MEMS V-cone Sensor in Hydraulic System

Research on Mems Sensor in Hydraulic System Flow Detection

Numerical Simulation and Optimazition Design for Cone Differential Pressure Flowsensor

Research on Two Key Technologies of Improving Dynamic Quality of Hydraulic System with High Flow

Numerical Simulation for Cone Style Differential Pressure Flowsensor

Numerical Simulation and Experimental Research on Measurement Characteristics of Elbow Meter

A Measurement System of Cone Meter Differential Pressure Based on Labview

An Approach for Enhancing Dynamic Characteristics of Differential Pressure Flow Meters

Design and Fluid–structure Interaction Analysis of a Micromachined Cantilever-Based Differential Pressure Flow Sensor

Principle and Application of Silicion Micromachined Fluid Sensor Based on MEMS

Fluid Structure Interaction Analysis and Simulation of Micromachined Cantilever-Based Flow Sensor

Research and Design of the Pressure Simulator System

A numerical investigation of conjugate forced heat transfer for a micro thermal flow sensor

Experiment and Numerical Simulation on Gas-Liquid Annular Flow Through a Cone Sensor

Numerical Simulation and Optimal Design for Cone Flowmeter

Investigation on Pressure-Tapping Methods of Long Waist Cone Flow Meter Using CFD Simulation

Research on vibration characteristics of cone valve based on steady state hydrodynamics

Testing system for dynamic flow measurement on the basis of DASYLab

Design and development of MEMS based beam-membrane structure flow sensor

Field characteristic of two-phase flow measurement based on long waist cone and conductance sensor fusion

Digital Analysis of Hydraulic Cone Valve Turbulence Based on Fluent 3D Solver