Abstract:The study proposes a Kalman Filter Family-schemed algorithm to identify the vehicle’s parameters and evaluate the road roughness simultaneously, based on the response of an adapted monitoring vehicle. The vehicle is simplified as a three-dimensional multi-body system consisting of the unsprung mass of wheels and the sprung mass of the car body, connected by springs and dampers that represent the suspension system. Accelerometers and a gyroscope measure the accelerations or angular velocity of different positions of the vehicle during vibrations. The Kalman filter (KF) with unknown inputs enables the prediction of the car body’s accelerations from those of wheels. On the other hand, the Augmented KF can compute the accelerations of wheels based on the car body’s accelerations. Thus, an inner-systemic objective function incorporating the vehicle’s parameter is built between the predicted and measured accelerations and solved in an optimized manner with the Genetic Algorithm, so that an individual complicated impact test or bump test is avoided. The numerical examples carry out field tests on a 900[Formula: see text]m long standardized test road under two scenarios of with and without a bump. The road roughness estimated by these two KF methods from different measurements is used to calculate the International Roughness Index (IRI) and further the Riding Quality Index, which are compared with those directly provided by a standardized laser IRI profilometer. Accordance in between confirms the accuracy of the proposed algorithm under different scenarios. The analysis underlines the measurements from unsprung wheels that contact directly with the road enable a more accurate estimation of road roughness than those from the sprung car body. In addition, a vehicle speed lower than 40[Formula: see text]km/h can provide a better estimation of the road profiles.

An Estimation Algorithm for Soil Parameters for Air-Cushion Vehicles

Parameters optimization of interconnected hydro-pneumatic suspension for road comfort and road-friendliness based on genetic algorithm

A Hierarchical Estimation Scheme of Tire-Force Based on Random-Walk SCKF for Vehicle Dynamics Control

Estimation of Road Roughness Based on Both the Sprung and Unsprung Response of a Moving Vehicle over Ordinary Roads: Modeling, Experiments and Discussions

Simultaneous Estimation of Vehicle Mass and Unknown Road Roughness Based on Adaptive Extended Kalman Filtering of Suspension Systems

Combined Estimation of Vehicle Body State and Sprung Mass Based on Electronically Controlled Air Suspension System

Longitudinal-lateral-cooperative estimation algorithm for vehicle dynamics states based on adaptive-square-root-cubature-Kalman-filter and similarity-principle

Adaptive Estimation of Vehicle Dynamics Through RLS and Kalman Filter Approaches.

Real-Time Estimation Of Vehicle'S Lateral Dynamics At Inclined Road Employing Extended Kalman Filter

A Robust Hierarchical Estimation Scheme for Vehicle State Based on Maximum Correntropy Square-Root Cubature Kalman Filter

An algorithm for estimating the ultimate speed of vehicles on wet roads

Platoon Joint EKF for Improved Road Friction Estimation in Autonomous Platoons

Real-Time Center of Gravity Estimation for Intelligent Connected Vehicle Based on HEKF-EKF

An adaptive estimation of ground vehicle state with unknown measurement noise

Real-time estimation of barycenter position for fuel cell distributed drive electric tractor based on derived UKF

Adaptive Estimations of Tyre–road Friction Coefficient and Body’s Sideslip Angle Based on Strong Tracking and Interactive Multiple Model Theories

The Estimation of Vehicle Speed and Tire-road Adhesion Coefficient Using Moving Horizon Strategy

Estimation of road adhesion coefficient based on Sage-Husa adaptive filtering improved square root cubature Kalman filter algorithm

Comparative Simulation Study on Two Estimation Methods and Two Control Strategies for Semi-Active Suspension

Distributed Electric Vehicle State Parameter Estimation Based on the ASO-SRGHCKF Algorithm

Study on vehicle state and tire–road friction coefficient estimation based on maximum correntropy generalized high-degree cubature Kalman filter