Abstract:The use of general tensegrity systems that incorporate rigid bodies beyond axially loaded members has garnered increasing attention in practical applications. Recent preliminary studies have been conducted on the analysis and form design of general tensegrity systems with disconnecting rigid bodies. However, existing methods cannot account for connections between different rigid bodies. In practical applications, general tensegrity systems may have interconnected rigid bodies, rendering the analysis method proposed in previous studies inapplicable. To address this issue, this work proposes a comprehensive and unified analysis method for general tensegrity systems. The proposed formulation allows for the incorporation of connections between rigid bodies and general tensegrity systems with supports into the developed framework, enabling uniform analysis. Equilibrium and compatibility equations are derived through an energy approach combined with the Lagrange multiplier method. Self-stress states and mechanism modes are then computed based on these formulations. The stiffness of the mechanism mode is analyzed and validated using both the product force method and the reduced geometric stiffness matrix method. Furthermore, a self-stress design approach based on semi-definite programming (SDP) is proposed to determine feasible member forces that can stabilize general tensegrity systems. Illustrative examples are presented to verify the effectiveness of the proposed approach. This study expands the scope of the analysis theory for tensegrity systems and provides a fundamental and unified analysis approach that can be applied to any type of tensegrity system.

Geometric stiffening effect on rigid-flexible coupling dynamics of an elastic beam

Numerical Modeling of Force-Stiffness Response of Cross-Linked Actin Networks Using Tensegrity Systems

The elastic buckling of frame columns considering the effect of the shear deformations

A simplified analysis on elastic plastic stability of flexural bracing-frame system

STORY-BASED ELASTIC-PLASTIC STABILITY COEFFICIENTS OF FRAMES

Residual Stiffness Assuring Stability of Steel Structures

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

Stability of Nonlinear Motion of a Rigid-Flexible Coupled System

The Structural Flexibility Effects on the System Impact Dynamics

The Stability of Geometric Nonlinear Vibrations of a Deploying Flexible Appendage of a Spacecraft

Buckling of a Stiff Thin Film on a Compliant Substrate in Large Deformation

Large deformations of hyperelastic curved beams based on the absolute nodal coordinate formulation

Geometric Nonlinear Effects on the Planar Dynamics of A Pivoted Flexible Beam Encountering A Point-Surface Impact

A Note on the Foreshortening Effect of a Flexible Beam under Oblique Excitation

Direct influence of residual stress on the bending stiffness of cantilever beams

Effect of Joint Stiffness on Dynamic Behaviors and Seismic Properties of Two-Dimensional Multistory Steel Frames

Hybrid-member Stiffness Matrix Accounting for Geometrical Nonlinearity and Member Inelasticity in Semi-Rigid Frameworks

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

Geometric nonlinear dynamic analysis of curved beams using curved beam element

Coupling effects of surface energy, strain gradient, and inertia gradient on the vibration behavior of small-scale beams

Analytical Investigation on Effective Elastic Stiffness of Eccentric Steel Beam–column Joints