Abstract:In the process of strip rolling, mill vibration induces vertical and horizontal displacements in the rolls and rolled parts, affecting the accuracy of the rolling analysis model. Constant changes occurred in the rolling zone between the upper and lower working rolls due to mill vibration, resulting in slight vertical and horizontal displacements of the rolled pieces. These displacements, subsequently, affected the precision and accuracy of the rolling analysis model. A dynamic rolling force optimization model was established in this paper based on the Karman differential equation, metal flow equation, and mixed lubrication friction model. This model took into account the small displacements in both vertical and horizontal directions of the rolled parts, effectively addressing the issue of rolling area variation. A vertical–horizontal coupling vibration model for the cold rolling mill was developed, employing the dynamic rolling force model and lumped mass method. The accuracy of the dynamic rolling force model was validated, and a comprehensive examination of the vibration mechanism of the rolling mill, including exploration of suppression methods, was conducted. The amplitude-frequency response of the coupled vibration system was determined using the multiple scales method, and the effects of external excitation and mill structure parameters on the coupled vibration characteristics were analyzed. The results indicated that the dynamic rolling force optimization model had considered the variations in rolling parameters and could explore the complex vibration patterns of the rolling mill itself from the perspective of varying rolling parameters, effectively addressing the issue of rolling region changes. Furthermore, it exhibited high precision in analyzing vertical and horizontal coupling vibrations in the rolling mill. The simulation results indicated that the primary cause of distance vibrations between the rollers was internal resonance triggered by similar external excitation frequencies and derived frequencies coupled in both vertical and horizontal directions. This was subsequently followed by the movement displacement of the hydraulic cylinder piston and changes in coupling parameters, which had a significant impact on the amplitude and resonance region of the vibration system.

Modeling Simulation and Analysis of Coupled Vibrations of Multi-Stand Tandem Rolling

Vibrations of tandem cold rolling mill: coupled excitation of rolling force and variable stiffness of fault-free back-up roll bearing

Tandem Strip Mill＇s Multi-parameter Coupling Dynamic Modeling Based on the Thickness Control

Coupled Vertical–Horizontal Vibration Characteristics of a Cold Rolling Mill Based on an Optimized Karman Differential Equation

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Simulation of nonlinear vibration of automobile main reducer

Study on Electromechanical Coupling Characteristics of Electric Vibration Table in High-Translational-Acceleration

Research on Dynamic Response of Cold Rolling Mill with Dynamic Stiffness Compensation

Vibration Analysis of Main Transmission System of the Bar Mills

Vibration monitoring and analysis of strip rolling mill based on the digital twin model

Torsional Vibration Analysis of the Tandem Cold Mill Main Drive

Research on nonlinear dynamic vertical vibration characteristics and control of roll system in cold rolling mill

Vibration Tests and Crack Analyses on Multi-Storeys Industrial Factory Buildings

Research on vibration characteristics of mill rolls based on nonlinear stiffness of the hydraulic cylinder

Vibration characterization of rolling bearings with compound fault features under multiple interference factors

The coupled bending-torsional dynamic behavior in the rotating machinery: modeling, simulation and experiment validation

Prediction and analysis of cold rolling mill vibration based on a data-driven method

Characteristic of torsional vibration of mill main drive excited by electromechanical coupling

Model of Dynamic Mechanical Parameters and Vibration Analysis in Hot Rolling

Gear Rattle Modeling Based on Transient Stiffness and Damping Analysis

A Multi-scale Modelling by Coupling Cellular Automata with Finite Element Method and Its Application on Cross-Wedge Rolling