Abstract:Grafted inorganic nanoparticles can greatly improve the mechanical performance of polymers. To examine the effects of the interfacial characteristics generated by the grafting polymer bonded to nanoparticle surfaces, we chemically grafted nano-silica with different polymers and then melt-mixed it with polypropylene (PP). We extracted the homopolymers produced during the graft polymerization from the grafted products before the composites were manufactured to get rid of the side effects of the nongrafting polymers. We tailored the interfacial interaction between the grafted nano-SiO2 and PP matrix by changing the amount of the grafting polymers on the nanoparticles, that is, the grafting percentage. Mechanical tests indicated that all the composites incorporated with grafted nano-SiO2 particles possessed much higher impact strength than untreated SiO2/PP composites and neat PP. The greatest contribution of the particles was made at a low grafting percentage. Tensile measurements showed that the treated nanoparticles could provide PP with stiffening, strengthening, and toughening effects at a rather low filler content (typically 0.8 vol %) because of the enhanced interfacial adhesion resulting from molecular entanglement and interdiffusion between the grating polymers on the nanoparticles and matrix macromolecules. The presence of grafting polymers on the nanoparticles provided the composites with a tailorable interphase. The tensile performance of the composites was sensitive to the nature of the grafting polymers. Basically, a hard interface was beneficial to stress transfer, whereas a soft one hindered the development of cavities in the matrix. (C) 2004 Wiley Periodicals, Inc.

IMPROVEMENT OF OPTICAL PROPERTIES OF ZnO-SILICONE NANOCOMPOSITES BY CHEMICAL GRAFTING

New high performance transparent UV-curable poly(methyl methacrylate) grafted ZnO/silicone-acrylate resin composites with simultaneously improved integrated performance

Effective increase in the refractive index of novel transparent silicone hybrid films by introduction of functionalized silicon nanoparticles

High-transparency Polymer Nanocomposites Enabled by Polymer-Graft Modification of Particle Fillers.

Synthesize Uniform ZrO2 NPs by Non-Coordination Solvents and Modification for High Refractive Film

Synthesize Uniform ZrO 2 NPs by Non-coordination Solvents and Modification for High Refractive Film

Surface Modification of ZrO2 Nanoparticles with TEOS to Prepare Transparent ZrO2@SiO2-PDMS Nanocomposite Films with Adjustable Refractive Indices

Performance Improvement of Nano-silica/Polypropylene Composites Through In-Situ Graft Modification of Nanoparticles During Melt Compounding

Refractive Index Engineering of Polymer Nanocomposites Prepared by End-grafted Polymer Chains Onto Inorganic Nanoparticles

GRAFTING POLYMERIZATION ONTO NANOSILICA AND ITS EFFECT ON MECHANICAL PROPERTIES OF PP COMPOSITES

Influence of Grafting Modification on Dielectric Properties of Epoxy-Grafted SiO2/Epoxy Composites

Synthesis and Characterization of PMMA Grafted ZnO Nanoparticles

Interfacial Effects in Polypropylene–silica Nanocomposites

Improving the Interfacial Strength of Silicone Resin Composites by Chemically Grafting Silica Nanoparticles on Carbon Fiber

Polymer Grafting Modification of the Surface of Nano Silicon Dioxide

Effects of Silane Surfactant on Nano-ZnO and Rheology Properties of Nano-Zno/epoxy on the UV Absorbability of Nano-Zno/epoxy/micron-hgf Composite

Fabrication of Polymerizable ZnS Nanoparticles in N,N′-dimethylacrylamide and the Resulting High Refractive Index Optical Materials

TiO2 nanocomposites with high refractive index and transparency

Preparation of Surface-Modified Nano Zinc Sulfide/Polyurethane Inorganic-Organic Transparent Coating and Its Application in Resin Lens

Grafting of Hyperbranched Polymer Onto the Nanosilica Surface and Their Effect on the Properties of UV-curable Coatings

Preparation of Superhydrophobic Glass Fiber and Interfacially Reinforced Glass Fiber/epoxy Composites by Grafting Polysiloxane Nanowires