A Nonaqueous Route to Prepare Novel CuS Macroporous Material

SM Wan,F Guo,YY Peng,L Shi,YT Qian

DOI: https://doi.org/10.1246/cl.2004.1068

2004-01-01

Chemistry Letters

Abstract:A novel nonaqueous route was applied to synthesize CuS macroporous material by the reaction between CuCl2.2H(2)O and S via the reducing action of ethylene glycol solvent. The CuS macroporous material was formed by the irregular intergrowth of CuS thin layer crystals.

What problem does this paper attempt to address?

The Convenient Preparation of Porous CuO Via Copper Oxalate Precursor

Zhigang Jia,Linhai Yue,Yifan Zheng,Zhude Xu

DOI: https://doi.org/10.1016/j.materresbull.2007.07.044

IF: 5.6

2008-01-01

Materials Research Bulletin

Abstract:Porous copper oxide has been synthesized via copper oxalate precursor, which was prepared in mild condition without any template or additive. Powder X-ray diffraction, scanning electron microscopy, and nitrogen physisorption method are used to characterize various properties of the obtained samples. SEM analyses show that the precursor morphology was maintained after calcination, and the obtained hierarchically copper oxide was built up of nanocrystals. Nitrogen physisorption analyses show that copper oxide samples were very porous. The porous material could be found application in catalysis field.
Simple synthesis of flower-like ln2S3 structures and their use as templates to prepare CuS particles

Xia Sheng,Lei Wang,Guanbi Chen,Deren Yang

DOI: https://doi.org/10.1155/2011/280216

2011-01-01

Abstract:AbstractFlower-like structure In2S3 particles are prepared by a simple and rapid method. The reaction proceeds in a polyalcohol system without using any complex precursors. The phase and morphology of the In2S3 are investigated. Furthermore, flower-like structure CuS particles are synthesized via the reaction of Cu2+ ions with the obtained In2S3 as templates. Both the In2S3 and CuS particles can be used in preparing compound solar cell material CuInS2.
A Novel One-Step Solvothermal Route to Nanocrystalline CuSbS2 and Ag3SbS3

Hl Su,Y Xie,Sk Wan,B Li,Yt Qian

DOI: https://doi.org/10.1016/s0167-2738(99)00094-6

IF: 3.699

1999-01-01

Solid State Ionics

Abstract:A novel solvothermal method has been successfully developed to prepare nanocrystalline CuSbS2 and Ag3SbS3 by the reactions between CuI and AgNO3 with SbCl3 and elemental sulfur in ethylenediamine at 140°C for 12 h, respectively. XRD, TEM and XPS examinations investigated the phase, grain size, morphology and purity of the products, respectively. Ethylenediamine played important roles in the formation of the ternary sulfides. A possible mechanism is proposed and expected to explain similar reactions.
Simple Synthesis of Flower-Like<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mrow><mml:mtext>ln</mml:mtext></mml:mrow><mml:mrow><mml:mn mathvariant="bold">2</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>S</mml:mtext></mml:mrow><mml:mrow><mml:mn mathvariant="bold">3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>Structures and Their Use as Templates to Prepare CuS Particles

Xia Sheng,Lei Wang,Guanbi Chen,Deren Yang

DOI: https://doi.org/10.1155/2011/280216

IF: 3.791

2011-01-01

Journal of Nanomaterials

Abstract:Flower-like structureIn2S3particles are prepared by a simple and rapid method. The reaction proceeds in a polyalcohol system without using any complex precursors. The phase and morphology of theIn2S3are investigated. Furthermore, flower-like structure CuS particles are synthesized via the reaction ofCu2+ions with the obtainedIn2S3as templates. Both theIn2S3and CuS particles can be used in preparing compound solar cell materialCuInS2.
Facile polyol synthesis of CuS nanocrystals with a hierarchical nanoplate structure and their application for electrocatalysis and photocatalysis

Wenlong Fu,Maochang Liu,Fei Xue,Xixi Wang,Zhidan Diao,Liejin Guo

DOI: https://doi.org/10.1039/c6ra17221k

IF: 4.036

2016-01-01

RSC Advances

Abstract:The article describes a robust method for the facile polyol synthesis of high-quality CuS nanocrystals with a controlled hierarchical nanoplate structure. The success of this method relies on manipulating the reaction kinetics with different sulfur precursors. In particular, with a medium releasing rate of S2-, we are able to produce CdS hierarchical spherical nanoflowers composed with multi-layered nanoplates, while a slow or fast release of S2- gives the monodispersed hexagonal nanoplates or disordered nanoplate complexes, respectively. Benefitting from its large surface area and the hierarchical structure for light reflection, the CuS nanoflower with a hierarchical plate structure showed the best electrocatalytic and photocatalytic performances when benchmarking its activity with the well-shaped nanoplate and the disordered nanoplate complex.
Synthesis of Hierarchical CuS Flower-Like Submicrospheres Via an Ionic Liquid-Assisted Route

Lihua Wang,Chao Xu,Dingbing Zou,Hao Luo,Taokai Ying

DOI: https://doi.org/10.1007/s12034-008-0148-4

IF: 1.878

2008-01-01

Bulletin of Materials Science

Abstract:A facile, ionic liquid-assisted route was developed to synthesize hierarchical CuS flower-like submicrospheres at 80°C for 24 h. The method was based on a reaction between CuCl2 and thioacetamide (TAA) in aqueous solution with using ionic liquid 1-n-butyl-3-methylimidazolium chloride ([BMIM]Cl) as an assisted agent. The chemical composition, morphology and size of CuS product were characterized by XRD, SEM and TEM. The result shows that the as-prepared CuS consists of flowery spheres with a diameter of 0·6 ∼ 1·0 μm, and these submicrospheres are, in fact, built by numerous nanoflakes with a thickness of 10 ∼ 20 nm. The optical property of CuS product was examined by UV-Vis. In general, we suggested an ecologically and environmentally friendly route for the syntheses of hierarchical metal chalcogenides structures in this paper.
Single-Step Synthesis Of Copper Sulfide Hollow Spheres By A Template Interface Reaction Route

Sm Wan,F Guo,L Shi,Yy Peng,Xz Liu,Yg Zhang,Yt Qian

DOI: https://doi.org/10.1039/b407435a

2004-01-01

Journal of Materials Chemistry

Abstract:A novel single-step approach have been applied to fabricate CuS micrometer-sized hollow spheres; the procedure is based on a template interface reaction between CuCl and sulfur liquid droplets in ethylene glycol solvent.
Synthesis and Photocatalytic Performance of Copper Sulfide by a Simple Solvothermal Method

Shuang-long Zhou,Li-ge Gong,Xin-yu Zhao,Qiu-lan Liang,Wen-jia Zhang,Li-ying Wang,Kai Yu,Bai-bin Zhou

DOI: https://doi.org/10.1016/j.cplett.2020.138034

IF: 2.719

2020-01-01

Chemical Physics Letters

Abstract:We have successfully synthesized CuS nano-material by a mild and simple method and characterized by SEM, TEM, EDS, XRD and UV-Vis, confirmed that the obtained CuS was a granular, pure hexagonal phase. The possible formation process of CuS was deduced and the optical properties was also studied by using MB as target degradant, showed that the degradation rates reached 97.88% and CuS has efficient photocatalytic activity. The catalyst dosage, cyclic stability of catalysts, the effects of H2O2 and the photocatalytic mechanism were discussed.
Novel CuS Hollow Spheres Fabricated by a Novel Hydrothermal Method

HL Zhu,X Ji,D Yang,YJ Ji,H Zhang

DOI: https://doi.org/10.1016/j.micromeso.2004.12.017

IF: 5.876

2005-01-01

Microporous and Mesoporous Materials

Abstract:A thioglycolic acid (TGA) assisted hydrothermal process has been developed to synthesize submicron-sized copper sulfide (CuS) hollow spheres via the reaction between copper sulfate (CuSO4) and thioacetamide (CH3CSNH2). X-ray diffraction, transmission electron microscopy and scanning electron microscopy were employed to characterize the obtained product. Furthermore, the possible mechanism and the critical factors for the TGA-assisted hydrothermal synthesis of the CuS hollow spheres have been preliminarily presented.
A Facile Chemical Route to Semiconductor Metal Sulfide Nanocrystal Superlattices.

ZP Liu,JB Liang,D Xu,J Lu,YT Qian

DOI: https://doi.org/10.1039/b409825k

IF: 4.9

2004-01-01

Chemical Communications

Abstract:We report a facile chemical route for the synthesis of monodisperse nanocrystals of various metal sulfides (PbS, Cu(2)S, and Ag(2)S) and their assemblies into nanocrystal superlattices (NCSs); the sulfides NCSs were precipitated by adding ethanol to nanocrystal colloids, which were obtained directly by a reaction between metal thiolate and thioacetamide in a pure dodecanethiol solvent.
CTAB Assisted Synthesis of CuS Microcrystals: Synthesis, Mechanism, and Electrical Properties

Chunyan Wu,Guofang Zhou,Dun Mao,Zihan Zhang,Yiliang Wu,Wenjian Wang,Linbao Luo,Li Wang,Yongqiang Yu,Jigang Hu,Zhifeng Zhu,Yan Zhang,Jiansheng Jie

DOI: https://doi.org/10.1016/j.jmst.2013.09.004

2013-01-01

Abstract:CuS microcrystals were successfully prepared through a mild solvothermal reaction in ethylene glycol (EG) with the assistance of cationic surfactant cetyltrimethylammonium bromide (CTAB). An interesting morphology evolution from flower-like microspheres to hollow microspheres, and finally to smooth nanoflakes was observed when increasing the amount of CTAB. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UVevis spectroscopy. It was found that the amount of CTAB played an important role in determining the morphology of the CuS microcrystals. Electrical measurement reveals that the as - prepared CuS microspheres were of high conductivity, which might favor their device applications. It is expected that CuS microcrystals with controlled morphologies and structures will have important applications in solar cells. This simple but effective method could also be extended to the controlled growth of other inorganic microcrystals.
Chemical Deposition Route to Spatially Periodic Macroporous Copper Sulfide

雷志斌,柯燕雄,马少红,李健民,张玉根

DOI: https://doi.org/10.3969/j.issn.0253-2778.2002.03.004

2002-01-01

Abstract:Spatially periodic macroporous cop shrinkage has been fabricated by chemical deposition in a wide temperature range from the ambient condition to at least 160℃ using SiO2 spheres as template; the wall structure and the stability of honeycomb framework to heat and ultrasonic treatment were also investigated.
A Facile Solution Route to CuS Hexagonal Nanoplatelets

Yanshan Liu,Donghuan Qin,Li Wang,Yong Cao

DOI: https://doi.org/10.1016/j.matchemphys.2006.12.004

IF: 4.778

2007-01-01

Materials Chemistry and Physics

Abstract:We report a facile solution route for the synthesis of single-crystalline and hexagonal CuS nanoplatelets by thermolysing single-precursor copper ethylxanthate [Cu(exan)2] in hexadecylamine (HDA) at moderate temperature. The morphology and structure of CuS nanocrystals (NCs) are characterized by means of XRD, TEM, HRTEM, SAED and UV–vis absorption spectroscopy. Key synthetic parameters, such as reaction temperature, reaction time and precursor concentration, which have a great influence on the size and shape of the products, have been comprehensively investigated. It was found out that the nanoplatelets are self-assembled into one-dimensional ordered string-like structure under appropriate conditions. The solvent used to disperse the nanocrystals can affect the self-assembly of the CuS nanoplatelets, and polar solvent favors the formation of long strings. The possible mechanisms of forming hexagonal nanoplatelets and self-assembled strings are discussed.
Fabrication of novel urchin-like architecture and snowflake-like pattern CuS

Liying Zhu,Yi Xie,Xiuwen Zheng,Xiang Liu,Gui’en Zhou

DOI: https://doi.org/10.1016/j.jcrysgro.2003.08.038

IF: 1.8

2004-01-01

Journal of Crystal Growth

Abstract:The interesting biomimetic morphologenesis of CuS, containing urchin-like architecture and snowflake-like pattern can be separately obtained via heating different solutions. In our case, ethanol or the mixed solvent of ethanol/H2O containing CuCl2 and CS2 as raw materials in the presence of the surfactant additive cetyltrimethylammonium bromide (CTAB) have been used. The products were characterized by various techniques of XRD, SEM and ED. In the process, the solvent medium and the surfactant additive CTAB played very important roles in the formation of different biomimetic morphologies and the formation mechanisms were primarily discussed, respectively.
Single-step synthesis of copper sulfide hollow spheres by a template interface reaction routeElectronic supplementary information (ESI) available: XRD pattern of copper sulfide products. See http://www.rsc.org/suppdata/jm/b4/b407435a/

Songming Wan,Fan Guo,Liang Shi,Yiya Peng,Xinzheng Liu,Yuanguang Zhang,Yitai Qian

DOI: https://doi.org/10.1039/b407435a

2004-01-01

Journal of Materials Chemistry

Abstract:A novel single-step approach have been applied to fabricate CuS micrometer-sized hollow spheres; the procedure is based on a template interface reaction between CuCl and sulfur liquid droplets in ethylene glycol solvent.
The synthesis and characterization of nanocrystalline Cu- and Ag-based multinary sulfide semiconductors

Changhua An,Kaibin Tang,Guozhen Shen,Chunrui Wang,Liying Huang,Yitai Qian

DOI: https://doi.org/10.1016/S0025-5408(03)00046-1

IF: 5.6

2003-01-01

Materials Research Bulletin

Abstract:The novel polygonal flake like Ag8SnS6 crystal, Cu2FeSnS4 flaky, and well-dispersed Cu2CoSnS4 nanoparticles were successfully prepared via a convenient hydrothermal reaction route at relatively low temperature, which was avoiding the use of high temperature treatments or toxic organic solvents. The products were characterized by means of X-ray powder diffraction (XRD), transmission electronic microscopy (TEM), X-ray photoelectronic spectra (XPS) and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). It was found that the reaction temperature played a key role for the formation of the target products.
Controllable Synthesis of CuS Nanostructures from Self-Assembled Precursors with Biomolecule Assistance

B. Li,Y. Xie,Y. Xue

DOI: https://doi.org/10.1021/jp070861v

2007-01-01

Abstract:In this work, taking the preparation of CuS nanomaterials as an example, the multiple roles of L-cysteine in the formation of metal sulfide nanostructures were elucidated. First, the precursors captured from the initial reaction solutions were characterized by X-ray diffraction, X- ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy, which indicated that three typical precursors with different morphologies (dispersive flakes, flake-built spherical aggregations, and solid microspheres) have formed in the three initial reaction solutions with different ratios of L-cysteine to CuCl2, 2H(2)O. Then, the as-formed precursors decomposed as self-sacrificed templates under the hydrothermal condition to produce the interesting CuS nanostructures of highly ordered nanostructures (snowflake-like patterns and flower-like microspheres) and porous hollow microspheres. The mechanisms for the formation of the precursors and their transformation to the final CuS nanostructures have been discussed in detail. The UV-vis diffuse reflectance spectra of the as-obtained CuS nanomaterials with different morphologies have been investigated and discussed. Such work is meaningful in understanding the self-assembly of nanostructures and helpful to prepare novel functional nanomaterials.
Large scale synthesis of uniform CuS nanotubes in ethylene glycol by a sacrificial templating method under mild conditions

Chunyan Wu,Shu-Hong Yu,Shaofeng Chen,Guannan Liu,Bianhua Liu

DOI: https://doi.org/10.1039/b606226a

2006-01-01

Journal of Materials Chemistry

Abstract:Uniform CuS nanotubes of 30-90 nm in inner diameter and 20-50 nm in thickness, can be synthesized in large quantities by a facile solution reaction at 80 degrees C in ethylene glycol using Cu nanowires as sacrificial templates and choosing suitable sulfur sources for the sulfuration reaction, where suitable sulfur sources and solvent played crucial roles in the formation of well-defined CuS nanotubes. The results demonstrated that suitable sulfur sources such as thiourea and thiacetamide which release ionic sulfur rather than molecular sulfur at their decomposition temperature are favorable for the formation of CuS nanotubes, in contrast to sulfur powders. Further treatment of the product at higher temperature (140 degrees C) can improve the crystallinity but results in a slight shrinking of the nanotubes toward the inner side. In addition, the similar reaction in water media cannot produce such nanotubes. The shape evolution process and the formation mechanism of CuS nanotubes as well as the thermal stability of these nanotubes were studied.
Simple Synthesis of Flower-Like Ln 2 S 3 Structures and Their Use As Templates to Prepare CuS Particles

Xia Sheng,Lei Wang,Guanbi Chen,Deren Yang

DOI: https://doi.org/10.1155/2011/280216

2011-01-01

Abstract:Flower-like structure In2S3 particles are prepared by a simple and rapid method. The reaction proceeds in a polyalcohol system without using any complex precursors. The phase and morphology of the In2S3 are investigated. Furthermore, flower-like structure CuS particles are synthesized via the reaction of Cu2+ ions with the obtained In2S3 as templates. Both the In2S3 and CuS particles can be used in preparing compound solar cell material CuInS2.
Facile Sulfurization under Ambient Condition with Na2S to Fabricate Nanostructured Copper Sulfide

Eunseo Hwang,Yoonsu Park,Jongbae Kim,Taejong Paik,Don-Hyung Ha

DOI: https://doi.org/10.3390/nano11092317

IF: 5.3

2021-09-06

Nanomaterials

Abstract:The sulfurization reaction was investigated as a promising fabrication method for preparing metal sulfide nanomaterials. Traditional sulfurization processes generally require high vacuum systems, high reaction temperatures, and toxic chemicals, utilizing complicated procedures with poor composition and morphology controllability. Herein, a facile method is reported for synthesizing nanostructured copper sulfide using a sulfurization reaction with Na2S at room temperature under non-vacuum conditions. Moreover, we demonstrate that the morphology, composition, and optical properties of nanostructured copper sulfides could be controlled by the Na2S solution concentration and the reaction time. Nanostructured copper sulfides were synthesized in nanospheres, nanoplates, and nanoplate-based complex morphologies with various oxidation states. Furthermore, by comparing the optical properties of nanostructured copper sulfides with different oxidation states, we determined that reflectivity in the near infrared (NIR) region decreases with increasing oxidation states. These results reveal that the Na2S solution concentration and reaction time are key factors for designing nanostructured copper sulfides, providing new insights for synthesis methods of metal sulfide nanomaterials.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

A Nonaqueous Route to Prepare Novel CuS Macroporous Material

The Convenient Preparation of Porous CuO Via Copper Oxalate Precursor

Simple synthesis of flower-like ln2S3 structures and their use as templates to prepare CuS particles

A Novel One-Step Solvothermal Route to Nanocrystalline CuSbS2 and Ag3SbS3

Facile polyol synthesis of CuS nanocrystals with a hierarchical nanoplate structure and their application for electrocatalysis and photocatalysis

Synthesis of Hierarchical CuS Flower-Like Submicrospheres Via an Ionic Liquid-Assisted Route

Single-Step Synthesis Of Copper Sulfide Hollow Spheres By A Template Interface Reaction Route

Synthesis and Photocatalytic Performance of Copper Sulfide by a Simple Solvothermal Method

Novel CuS Hollow Spheres Fabricated by a Novel Hydrothermal Method

A Facile Chemical Route to Semiconductor Metal Sulfide Nanocrystal Superlattices.

CTAB Assisted Synthesis of CuS Microcrystals: Synthesis, Mechanism, and Electrical Properties

Chemical Deposition Route to Spatially Periodic Macroporous Copper Sulfide

A Facile Solution Route to CuS Hexagonal Nanoplatelets

Fabrication of novel urchin-like architecture and snowflake-like pattern CuS

Single-step synthesis of copper sulfide hollow spheres by a template interface reaction routeElectronic supplementary information (ESI) available: XRD pattern of copper sulfide products. See http://www.rsc.org/suppdata/jm/b4/b407435a/

The synthesis and characterization of nanocrystalline Cu- and Ag-based multinary sulfide semiconductors

Controllable Synthesis of CuS Nanostructures from Self-Assembled Precursors with Biomolecule Assistance

Large scale synthesis of uniform CuS nanotubes in ethylene glycol by a sacrificial templating method under mild conditions

Simple Synthesis of Flower-Like Ln 2 S 3 Structures and Their Use As Templates to Prepare CuS Particles

Facile Sulfurization under Ambient Condition with Na2S to Fabricate Nanostructured Copper Sulfide