Abstract:Polymerase chain reaction (PCR) is the most common method used for nucleic acid (DNA) amplification. The development of PCR-performing microfluidic reactors (μPCRs) has been of major importance, due to their crucial role in pathogen detection applications in medical diagnostics. Closed loop (CL) is an advantageous type of μPCR, which uses a circular microchannel, thus allowing the DNA sample to pass consecutively through the different temperature zones, in order to accomplish a PCR cycle. CL μPCR offers the main advantages of the traditional continuous-flow μPCR, eliminating at the same time most of the disadvantages associated with the long serpentine microchannel. In this work, the performance of three different CL μPCRs designed for fabrication on a printed circuit board (PCB) was evaluated by a computational study in terms of the residence time in each thermal zone. A 3D heat transfer model was used to calculate the temperature distribution in the microreactor, and the residence times were extracted by this distribution. The results of the computational study suggest that for the best-performing microreactor design, a PCR of 30 cycles can be achieved in less than 3 min. Subsequently, a PCB chip was fabricated based on the design that performed best in the computational study. PCB constitutes a great substrate as it allows for integrated microheaters inside the chip, permitting at the same time low-cost, reliable, reproducible, and mass-amenable fabrication. The fabricated chip, which, at the time of this writing, is the first CL μPCR chip fabricated on a PCB, was tested by measuring the temperatures on its surface with a thermal camera. These results were then compared with the ones of the computational study, in order to evaluate the reliability of the latter. The comparison of the calculated temperatures with the measured values verifies the accuracy of the developed model of the microreactor. As a result of that, a total power consumption of 1.521 W was experimentally measured, only ~7.3% larger than the one calculated (1.417 W). Full validation of the realized CL μPCR chip will be demonstrated in future work.

Simply and Reliably Integrating Micro Heaters/sensors in a Monolithic PCR‐CE Microfluidic Genetic Analysis System

A Microchip-Based PCR Device Using Flexible Printed Circuit Technology

A Microfluidic Device Integrated with Multichamber Polymerase Chain Reaction and Multichannel Separation for Genetic Analysis

A highly integrated digital PCR system with on-chip heating for accurate DNA quantitative analysis

A Heater-Integrated Transparent Microchannel Chip for Continuous-Flow PCR

Design and Thermal Analysis of a Micro-Chamber PCR Integrated Chip

A Thermal Cycler Based on Magnetic Induction Heating and Anti-Freezing Water Cooling for Rapid PCR

Implementation of Rapid Nucleic Acid Amplification Based on the Super Large Thermoelectric Cooler Rapid Temperature Rise and Fall Heating Module

Design and Experiment of a PDMS-based PCR Chip with Reusable Heater of Optimized Electrode

Multichannel Oscillatory-Flow PCR Micro-Fluidic Chip with Controllable Temperature Gradient

An Integrated Microfluidic Real-Time Pcr System for Pathogen Detection

Closed-Loop Microreactor on PCB for Ultra-Fast DNA Amplification: Design and Thermal Validation

Study on Large Area Temperature Control System for a Low-cost PCR Chip

Practical integration of polymerase chain reaction amplification and electrophoretic analysis in microfluidic devices for genetic analysis

Polymerase Chain Reaction Chip with Microchannel of Glass Capillaries Embedded

An Integrated Nucleic Acid Extraction Microchip for Real-time PCR Micro Total Analysis

Portable Heating System Based on a Liquid Metal Bath for Rapid PCR.

The Design And Manufacture Of Functional Micro-Stationary Pcr Chip

A Thermocycler Using a Chip Resistor Heater and a Glass Microchip for a Portable and Rapid Microchip-Based PCR Device

An Integrated Nucleic Acid Extraction Microchip for Real-time Polymerase Chain Reaction Micro Total Analysis System

Centrifugal Microfluidic System For Nucleic Acid Amplification And Detection