Abstract:MgO–CaO composites are basic materials with high melting points, high chemical resistance to alkaline environments, clean steel production, environmental friendliness, and abundant sources. In the current work, carbon nanofibers (CNFs) with diameters between 150 to 270 nm were prepared at different temperatures (up to 1200 °C) by carbonization of electrospun polyacrylonitrile (PAN) precursors. Then, the MgO–CaO composites were prepared in two steps. First, 3 wt% CNFs carbonized at different temperatures were added to the composite to determine the optimal carbonization temperature. Subsequently, the physical properties (apparent porosity and bulk density) and mechanical properties (flexural strength (FS) and cold crushing strength (CCS)) of the MgO–CaO-CNF composites were investigated. X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), Energy-Dispersive X-ray spectroscopy (EDS), and thermogravimetric analysis (TGA) were used to analyze the composition, morphology, and structure of the CNFs powders and composite samples. Based on the results obtained, such as the percentage graphitization, length, average diameter, and morphology of the CNFs, 1000 °C was determined as the appropriate carbonization temperature for the next steps of this study. In a second step, the CNFs synthesized at 1000 °C were added to the MgO–CaO with different wt% (0, 0.5, 1, 1.5, 2, 2.5, and 3 wt%). It was found that by adding CNFs (up to 1.5 wt%) into the MgO-CaO composites, the physical properties increased due to the improvement of densification, and mechanical properties improved due to the activation of reinforcing mechanisms, the reduction of surface defects and the creation of a dense body. However, these properties decreased from 1.5 to 3 wt% due to the agglomeration and poor dispersion of the CNFs. Finally, the results illustrated that adding CNFs, even in small amounts, significantly improved the features of MgO-CaO compounds; the ideal content was 1.5 wt% CNFs.

Synthesis and characterization of carbon nanofiber/alumina composite by extrusion casting

Fabrication of Nanocrystalline Zro2 Particle Reinforced Aluminum Alloy Composite by Squeeze Casting Route

Preparation and Characterization of Tri-Lobular Alumina/Carbon Nanofiber Composites

Alumina-Based Ceramic Core Nano-Composites For Investment Casting

Characterization of Carbon Nanofiber Composites Synthesized by Shaping Process

Preparation and mechanical performance of ductile Csf/Al2O3-BN composites, Part 1: Effects of fiber length and sintering temperature

Effect of Carbon Nanotubes and High Temperature Extrusion on the Microstructure Evolution of Al-Cu Alloy

Mechanical and Electrical Properties of Carbon Nanofibers Reinforced Aluminum Nitride Composites Prepared by Plasma Activated Sintering

Effect of carbon nanotube hybrid on the microstructure and properties of AlN skeleton-reinforced highly oriented graphite flake composites

Preparation and Characterization of Nanocomposite Films Containing Nano-Aluminum Nitride and Cellulose Nanofibrils

Orientation control of carbon fibers and enhanced thermal/mechanical properties of hot-extruded carbon fibers/aluminum composites

Preparation and properties of alumina-carbon castables using SiC nanofiber coated graphite flake

Effect of Interfacial Structure on the Thermal Conductivity of Carbon Nanofibers Reinforced Aluminum Nitride Composites

Three Dimensional AlN Skeleton-Reinforced Highly Oriented Graphite Flake Composites with Excellent Mechanical and Thermophysical Properties

Processing and Properties of Carbon Nanotubes Reinforced Aluminum Composites

Synthesis and Characterization of Nanometer Activated Carbon-Aluminosilicate Composite Materials

Synthesis of uniformly dispersed carbon nanotube reinforcement in Al powder for preparing reinforced Al composites

Microstructure Evolution and Wear Characterization of Cnts/Al-Cu-Mg-Si Nanocomposites Manufactured Using Semi-Solid Stir Casting

Effect of carbon nanofibers fabricated from electrospun PAN precursors on the characteristics and Densification of MgO–CaO Ceramic systems

Fabrication of carbon fiber reinforced aluminum matrix composites by inorganic binders

Colloidal Processing of Carbon Nanotube/Alumina Composites