Abstract:This work aims to assess the possibility of using packaging industry waste to modify polypropylene products (PPs). The products were made in the form of extruded foil and injected samples. The products were produced using regranulate made of polypropylene cast foil. Maleic anhydride-modified polypropylene (MAPP) and polyolefin elastomer (POE) with a glycidyl ester functional group were used to modify the polypropylene. The samples were produced based on 50% foil waste reground and 50% pure PP. The rheological properties of the blends were assessed using the melt mass flow rate (MFR) technique; thermal properties using the differential scanning calorimetry method (DSC). The products manufactured using the injection molding method were subjected to an analysis of mechanical properties, such as tensile strength and impact strength. Also, in the case of film samples, tensile strength was assessed. Color-change assessments with CIE L*a*b* were carried out for all materials. Injection-molded products based on recycled metallized cast foil showed favorable mechanical properties such as tensile strength (1 MAPP = 26.7 MPa; 2 MAPP = 27.1 MPa), which was higher than the original material (cPP = 20.7 MPa). Also, for the films produced from regrind, the tensile strength was at a level similar (1 MAPP = 24.6 MPa; 2 MAPP/POE = 25.1 MPa) to the films extruded from virgin materials (cPP = 24.9 MPa). The introduction of a POE additive to the blends resulted in increased impact strength (1 MAPP/POE = 31 kJ/mol; 2MAPP/POE = 18 kJ/mol; 3 MAPP/POE = 11 kJ/mol) in relation to unmodified samples (cPP = 7 kJ/mol). The introduction of a POE additive to the tested mixtures improved the impact strength of the injected products by almost 4 times for sample 1 MAPP/POE and 2.5 times for sample 2 MAPP/POE in comparison to virgin cPP. These studies confirmed that foil waste can be successfully used to modify polypropylene products shaped both in the injection and extrusion processes.

Development a Anti-slip Panel Production Technology for Recycling Waste PE and PP Plastic Films

Parameters optimization for decontamination and fine physical regeneration pathways of polypropylene plastics from waste lunchboxes

Novel Strategy to Interpret the Degradation Behaviors and Mechanisms of Bio- and Non-Degradable Plastics

Design of Residual Film Recovery Machine for Whole Plastic Film Mulching on Double Ridges

Residual Film Recycling Machine Research and Analysis of the Collecting Device

Valorization of mixed plastics waste for the synthesis of flexible superhydrophobic films

Research Status and Prospect of Residual Plastic Film Pickup Mechanism in China

Study on Soil Residual Film Recycling Machine

Industrialized fine physical regeneration process and economic benefit assessment for recycling waste HDPE containers

Innovations for sustainable chemical manufacturing and waste minimization through green production practices

Development of Technologies for Processing Polypropylene Foil Waste and Their Use in the Production of Finished Products

An Overview of Management Status and Recycling Strategies for Plastic Packaging Waste in China

Progress in recycling and reutilization of waste polyethylene terephthalate

High‐quality and efficient recovery of waste agricultural mulch film mixture via solid‐state shear milling technology

High-Value Recycling of Isotactic Polypropylene-Based Plastic Waste as a Crystallization Promoter for High-Performance Polypropylene Random Copolymers

The Use and Recycling of Agricultural Plastic Mulch in China: A Review

A method for the treatment of black tea waste: Converting it into liquid mulching film and solid mulching film

Fabrication and Characterization of Transparent and Uniform Cellulose/Polyethylene Composite Films from Used Disposable Paper Cups by the “One-Pot Method”

Eco-Friendly and Complete Recycling of Waste Bamboo-Based Disposable Paper Cups for Value-Added Transparent Cellulose-Based Films and Paper Plastic Composites

Mechanized Recycling of Residual Film from Typical Ridge and Mulching Crops in China: Current Status, Problems, and Recommendations for Sustainable Agricultural Development

Transforming polypropylene waste into transparent anti-corrosion weather-resistant and anti-bacterial superhydrophobic films