Abstract:Treatment of highly contaminated wastewaters containing refractory or toxic organic contaminants (e.g. industrial wastewaters) is becoming a global challenge. Most technologies focus on efficient degradation of organic contaminants. Here we improve the cathode/FeIII/peroxydisulfate (PDS) technology by turning down the current density and develop an innovative mechanism for organic contaminants abatement, namely polymerization rather than degradation, which allows simultaneous contaminants removal and resource recovery from wastewater. This polymerization leads to organic-particles (suspended solid organic-polymers) formation in bulk solution, which is demonstrated by eight kinds of representative organic contaminants. Taking phenol as a representative, 83% of PDS is saved compared to degradation process, with 87.2% of DOC removal. The formed suspended solid organic-polymers occupy 59.2% of COD of the original organics in solution, and can be easily separated from aqueous solution by sedimentation or filtration. The separated organic-polymers are a series of polymers coupled by phenolic monomers, as confirmed by FTIR and ESI-MS analyzes. The energy contained in the recovered organic polymers (4.76 × 10-5 kWh for 100 mL of 1 mM phenol solution in this study) can fully compensate the consumed electrical energy (2.8 × 10-5 kWh) in the treatment process. A representative polymerization model for this process is established, in which the SO4•- and HO• generated from PDS activation initiate the polymerization and improve the polymerization degree by the production of oligomer intermediates. A practical coking wastewater treatment is carried out to verify the research results and get positive feedback, with 56.0% of DOC abatement and the suspended solid organic-polymers accounts for 42.5% of the total COD in the raw wastewater. The energy consumption (47 kWh/kg COD, including electricity and PDS cost) is lower than the values in previous reports. This study provides a novel method for industrial wastewater treatment based on polymerization mechanism, which is expected to recover resources while removing pollutants with low consumption.

The Study of Circulating Degradation of Highly Concentrated Phenol Wastewater by Gas-Liquid Phase Gliding Arc Discharge

TREATMENT OF HIGH ORGANIC WASTEWATER BY GAS-LIQUID GLIDING ARC DISCHARGE

Plasma Chemical Degradation of Phenol in Solution by Gas–liquid Gliding Arc Discharge

Phenol degradation by a hybrid gas-liquid discharge reactor with digital-analog mixed control

Degradation of Thiamethoxam in Wastewater by Low Temperature Plasma

Degradation of Phenol in Aqueous Solutions by Gas–Liquid Gliding Arc Discharges

Treatment of 4-Chlorophenol Solution by Gas-liquid Gliding Arc Discharge

Degradation of phenol using a combination of granular activated carbon adsorption and bipolar pulse dielectric barrier discharge plasma regeneration

DEGRADATION OF PHENOL WASTEWATER BY DUAL-FREQUENCY ULTRASOUND TECHNOLOGY

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

Application of a hybrid discharge reactor with D-A mixed control in phenol degradation

Degradation of Dyeing Wastewater by Gas-Liquid Gliding Arc Plamsa

Degradation of 4-Chlorophenol using a Gas–Liquid Gliding Arc Discharge Plasma Reactor

Progress in Research of Application of Gliding Arc Discharge to Wastewater Treatment

Experimental Study on Factors Affecting Degradation of Methyl Violet Wastewater by Gas-Liquid Phase Gliding Arc Discharge

Degradation of Dyeing Wastewater by Gas-liquid Gliding Arc Discharge

Degradation of Dyeing Wastewater and Study of Electrode Corrosion with Gas-Liquid Gliding Arc Discharge

Degradation of Organic Wastewater by Pulsed Discharge Plasma

Submerged arc plasma system combined with ozone oxidation for the treatment of wastewater containing non-degradable organic compounds

Degradation of gas–liquid gliding arc discharge on Acid Orange II

Treatment of contaminants by a cathode/FeIII/peroxydisulfate process: Formation of suspended solid organic-polymers