Abstract:Hg(II) imprinted and non-imprinted copolymers were prepared by metal ion imprinted polymer (MIIP) technique. The copolymers were obtained by copolymerizing mercury chloride (or without it), diazoaminobenzene (DAAB) and vinylpyridine (VP) using ethyleneglycoldimethacrylate (EGDMA) as cross-linker in the presence of 2,2′-azobisisobutryonitrile as initiator. The separation and preconcentration characteristics of the copolymers for Hg(II) were investigated by batch and column procedures. The results demonstrated that the Hg(II) imprinted copolymers had higher adsorption capacity with the value of 205μmolg−1 of dry copolymer, about 3.5 times of and good selectivity for Hg(II) compare to non-imprinted copolymers (58.6μmolg−1 of dry copolymer). The distribution ratio (D) values of the Hg(II) imprinted copolymers increased for Hg(II) with respect to both D values of Zn(II), Cu(II), Cd(II), CH3HgCl, CH3CH2HgCl and non-imprinted copolymer. The relatively selective factor (αr) values of Hg(II)/Cu(II), Hg(II)/Zn(II), Hg(II)/Cd(II), Hg(II)/CH3HgCl and Hg(II)/CH3CH2HgCl are 45.5, 63.5, 55.1, 49.6 and 84.0, respectively. The tolerance limit for other electrolytes such as NaCl, KBr, KI, NaNO3, Na3PO4, Na2SO4 and Mg(NO3)2 is also greatly improved with the values of 10–100-fold of the non-imprinted copolymer. The Hg(II) imprinted copolymers can be used at least 20 times with recoveries no less than 95%. Based on the packed columns with Hg(II) imprinted copolymers, a highly selective solid-phase extraction (SPE) and preconcentration method for Hg(II) from dilute aqueous solution was developed. The MIIP-SPE preconcentration procedure showed a linear calibration curve within concentration range from 0.13 to 25μgl−1. The detection limit and quantification limit were 0.05 and 0.13μgl−1 (3σ) for cold vapor atomic absorption spectrometry (CVAAS). The relative standard deviation of the eleven replicate determinations was 2.4% for the determination of 1.0μg of Hg(II) in 100ml water sample. Determination of Hg(II) in certified river sediment sample (GBW 08603) demonstrated that the column was good enough for Hg(II) determination in matrixes containing components with similar chemical property such as Cu(II), Zn(II), Cd(II), CH3HgCl and CH3CH2HgCl.

Selective solid-phase extraction of trace cadmium(II) with an ionic imprinted polymer prepared from a dual-ligand monomer.

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns

Selective solid phase extraction and preconcentration of Cd(II) in the solution using microwave-assisted inverse emulsion-suspension Cd(II) ion imprinted polymer

Synthesis and Application of Novel Magnetic Ion-Imprinted Polymers for Selective Solid Phase Extraction of Cadmium (II)

Selective Enrichment of Trace Copper(ii) from Biological and Natural Water Samples by SPE Using Ion-Imprinted Polymer.

A Novel Magnetic Cd(II) Ion-Imprinted Polymer As a Selective Sorbent for the Removal of Cadmium Ions from Aqueous Solution

Preparation and Recognition Performance of Molecularly Imprinted Polymers for Cadmium with Surface-Imprinting Technique

An ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique combined with a sol-gel process for selective solid-phase extraction of cadmium(II)

Use of the dummy approach for the synthesis of ion imprinted polymers with Ni(II) or Zn(II) as template ion for the solid‐phase extraction of Cu(II)

Synthesis and characterization of a surface-grafted Cd(II) ion-imprinted polymer for selective separation of Cd(II) ion from aqueous solution

Recognizing adsorption of Cd(II) by a novel core-shell mesoporous ion-imprinted polymer: Characterization, binding mechanism and practical application

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Analysis of Properties of Cadmium Adsorption Onto Whisker Surface Ion-Imprinted Polymer by Inductively Coupled Plasma Atomic Emission Spectrometry

Highly selective determination of inorganic mercury(II) after preconcentration with Hg(II)-imprinted diazoaminobenzene–vinylpyridine copolymers

Construction of hyperbranched imprinted nanomaterials for selective adsorption of cadmium (II)

Selective Solid-Phase Extraction of Nickel(ii) Using a Surface-Imprinted Silica Gel Sorbent

Removal of Cadmium(II) from Wastewater Using Novel Cadmium Ion-Imprinted Polymers

Adsorption of Cd2+ by an ion-imprinted thiol-functionalized polymer in competition with heavy metal ions and organic acids

Synthesis and Characterisation of Sodium Trititanate Whisker Surface Cd(II) Ion-Imprinted Polymer and Selective Solid-Phase Extraction of Cadmium

A polyethyleneimine-modified attapulgite as a novel solid support in matrix solid-phase dispersion for the extraction of cadmium traces in seafood products

Preparation of p-tert[(dimethylamino)methyl]-calix[4]arene functionalized aminopropylpolysiloxane resin for selective solid-phase extraction and preconcentration of metal ions.