Abstract:A dual-machine horizontal automatic drilling and riveting system for aircraft panel assembly is presented in this paper. Two cooperative machines are adopted, like a two-robot system, to achieve the unobstructed workspace, so it can be applied in an efficient assembly line. Different from the current deign wisdom to ensuring the riveting accuracy by increasing the machine stiffness, which detrimentally results in higher masses to be moved and sophisticated reinforcements being used, this paper proposes a disturbance observer (DOB) based design method of riveting force controller for adaptive riveting with high accuracy driven heads, reducing the dependence of automatic riveting on high stiffness of machine. This method simplifies the force-induced deformation error compensation problem to a force control problem, which has rarely been studied before in literature. The separate layout leads to weak machine stiffness in the whole workspace and the stiffness varies with machine pose greatly, which makes it difficult to establish an accurate force-induced deformation error compensation model. To make the riveting machine precisely generate the desired force under such stiffness-varying conditions, a robust control algorithm is designed: the disturbance observer is introduced to address the robust stability against model parameter variance caused by the change of system stiffness with pose, and the feedforward controller can achieve the high-bandwidth force control to ensure the riveting efficiency. The model identification experiments are carried out for different machine stiffness. Validation riveting experiments have been conducted to verify the proposed controller on the dual-machine riveting system. The results show that, compared with previous displacement control, the proposed force controller can ensure the consistency of driven heads through accurate force control.

Bracket Deformation Analysis and Compensation Method for an Automatic Drill-riveting System

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Influence of the Deformation of Riveting-Side Working Head on Riveting Quality

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Local-global Method to Predict Distortion of Aircraft Panel Caused in Automated Riveting Process

Clamping force prediction for automatic drilling of stacked thin-walled workpieces based on finite element method

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Prediction and Compensation of Force-Induced Deformation for a Dual-Machine-based Riveting System Using FEM and Neural Network

Study on Analysis and Prediction of Riveting Assembly Variation of Aircraft Fuselage Panel

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Dynamic Modeling and Sensitivity Analysis of Dual-Robot Pneumatic Riveting System for Fuselage Panel Assembly

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Study on Milling Deformation of Aerospace Frame Monolithic Components

Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process

Multi Load-Transmitting Device Based Support Layout Optimization for Large Fuselage Panels in Digital Assembly

Structural spatial analysis method of prestressed concrete box girder with corrugated steel webs

Modified Solution Strategy Of Framed Structures For Geometrically Nonlinear Analysis

Optimization of riveting parameters using Kriging and particle swarm optimization to improve deformation homogeneity in aircraft assembly

Assembly Error Calculation with Consideration of Part Deformation

Study on the Mechanism of Cumulative Deformation and Method for Suppression in Aircraft Panel Riveting