Abstract:The membrane extraction of copper ions was carried out using hydrophobic poly(propylene) (PP) hollow fiber membrane modules and kerosene solutions containing organic extractant. The influences of different extractant on the extraction yield, mass transfer performance and mass transfer mechanism were studied. Compared with 2-ethylhexyl phosphoric acid (2EHPA) and 2-methyl-5-sulpho benzaldoxime (2M5SB), di-(2-ethylhexyl)phosphoric acid (D2EHPA) extractant system with high distribution coefficient exhibited higher extraction yield of 99.7%. The extraction equilibrium time, the final extraction yield and the total mass transfer coefficient were independent of the flow rates of two phases. The extraction equilibrium time and the final extraction yield at different flow rates of two phases were 80 min and near 99.5%, respectively. A mass transfer model of a complexation reaction describing the overall mass transfer resistance was controlled by interfacial reactions rather than the aqueous and organic boundary layer which could explain the effect of flow rate on the final extraction yield and the total mass transfer coefficient. This model showed that the mass transfer resistance and mass transfer coefficient were independent Of Cu2+ when copper ion concentration was more than 0.06 g/L. However, when copper concentration was less than 0.06 g/l, the mass transfer resistance increased as Cu2+ concentration decreased, and the mass transfer coefficient decreased as Cu2+ concentration decreased. Extractant entrainment in the aqueous phase and membrane fouling were investigated primarily. It was found that the solvent entrainment could reduce to 10ppm much lower than 200ppm of the classic liquid-liquid extraction, and that the cleaning of contaminated membranes was not complete. However, it can be still concluded from this research that the membrane extraction in PP hollow fibre with D2EHPA extractant would be an effective and promising processing means for Cu2+ separation from aqueous solution. Copyright (c) 2005 John Wiley & Sons, Ltd.

Extraction of Co~(2+) and Cd~(2+) from Wastewater Using Hydrophobic Ionic Liquids as Solvents

Positively Charged PVC Ultrafiltration Membrane Via Micellar Enhanced Ultrafiltration for Removing Trace Heavy Metal Cations

Selective Extraction of Copper, Mercury, Silver, and Palladium Ions from Water Using Hydrophobic Ionic Liquids

Functionalized dithiocarbamate chelating resin for the removal of Co2+ from simulated wastewater

Membrane Extraction For Separation Of Copper Cations From Acid Solution Using Polypropylene Hollow Fibre Membrane

High efficiently removal of Cd(II) in environmental water samples by nano-particle supported ionic liquid material

[Recovery of Zinc Ion and Cadmium Ion with Hollow Fiber Membrane Extraction].

Separation of cobalt and lithium from spent lithium-ion battery leach liquors by ionic liquid extraction using Cyphos IL-101

Selective recovery of valuable metals from spent Li-ion batteries using solvent-impregnated resins

The selective and sustainable separation of Cd(II) using C6MImT/[C6MIm]PF6 extractant

Selective solid phase extraction and preconcentration of Cd(II) in the solution using microwave-assisted inverse emulsion-suspension Cd(II) ion imprinted polymer

Synthesis of Quaternary-Ammonium-Lignin-Based Ionic Liquids and Comparison of Extraction Behavior of Co(II) and Ni(II) with 2-Ethylhexyl Phosphoric Acid Mono-2-Ethylhexyl Ester

Separation of Palladium from Alkaline Cyanide Solutions through Microemulsion Extraction Using Imidazolium Ionic Liquids

Removal of heavy metal ion cobalt (II) from wastewater via adsorption method using microcrystalline cellulose–magnesium hydroxide

Removal of Co(II) from Aqueous Solutions with Amino Acid-Modified Hydrophilic Metal-Organic Frameworks

Exclusive Separation of Cu(II) with Aminophosphonic Acid-Functionalized Hydrogel from Strong Acidic Media

Removal of Cd2+ from synthetic wastewater using micellar-enhanced ultrafiltration with hollow fiber membrane

Novel 3-Hydroxy-2-Naphthoate-Based Task-Specific Ionic Liquids for an Efficient Extraction of Heavy Metals

Synthesis and Application of a Novel Metal–Organic Frameworks-Based Ion-Imprinted Polymer for Effective Removal of Co(II) from Simulated Radioactive Wastewater

A Microextraction Approach for Rapid Extraction and Separation of Mn(II) and Co(II) Using Saponified D2EHPA System

2-Mercaptobenzoic acid-based ionic liquids for metal extraction from water without additional chelating agent