Abstract:As a new generation advanced display or projection technology, laser displays or projectors have attracted great attention owing to their ultra-high brightness, energy saving nature, brilliant image quality and/or large sizes. However, for laser displays or projectors without using three primary laser diodes, the lack of appropriate blue-laser-driven color converters is a big limitation and challenge. In this work, we propose to develop laminated phosphor-in-glass (PiG) films as laser-driven color converters for wide-color-gamut and high-brightness laser displays. The beta-Sialon:Eu and CaAlSiN3-LiSi2N2-Si2N2O, Calson:Ce phosphors were chosen as the green and orange emitters, respectively, and were co-fired with glass frits on a sapphire substrate to form PiG films. No interfacial reactions between phosphors and glass were identified, and phosphor powders were uniformly distributed in the glass matrix. The phosphor content and the film thickness had an influence on the microstructure, luminance saturation and optical properties of the PiG films under laser light irradiation; both PiG films reached a maximum luminance saturation of 6.09 W mm(-2) when their microstructures were optimized. The lamination architecture of the PiG films had a great impact on the optical properties of the laser-driven white light, and the maximum ones were achieved as the green-emitting PiG film was positioned on the orange-emitting film adhered to the sapphire substrate. Under 4.82 W mm(-2) blue laser excitation, the laminated double-layer PiG films enabled the creation of white light with a wide color gamut of 107% NTSC, luminous efficacy of 74.44 lm W-1, luminous flux of 282.13 lm and color temperature of 7902 K. These results indicate that the laminated PiG films are promising color converters for use in high-power and wide-color-gamut laser displays or projectors.

Recent Progress in RGB Laser Oscillation Based on Pr~(3+)-Doped Fluoride Glass Fiber for Laser Display Application

Advances, challenges and prospects of visible fiber lasers in display technologies

Potential Application of a Green Fiber Laser in Laser Display Systems.

Stable CsPbBr3‐Glass Nanocomposite for Low‐Étendue Wide‐Color‐Gamut Laser‐Driven Projection Display

Research Progress of Red Semiconductor Laser Diodes for Laser Display

Narrow-Band Green-Emissive -SiAlON:Eu<SUP>2+</SUP> Phosphor-in-Glass Film for Laser Display Applications

Β‐sialon:Eu2+ Phosphor‐in‐Glass Film: an Efficient Laser‐Driven Color Converter for High‐Brightness Wide‐Color‐Gamut Projection Displays

Influence of Spectral Linewidth and Wavelength Selection of Laser Display

QUASI-WHITE LASER BASED ON OPTICAL SUPERLATTICE AND ALL-SOLID-STATE LASER TECHNIQUE

Laser Displays——New Display Technology for Next Generation

Photodarkening in Pr3+-doped Silicate Glasses and Fibers

Design of Laser Projection Display Illumination System Based on Freeform Surface Array

Realizing high-brightness and ultra-wide-color-gamut laser-driven backlighting by using laminated phosphor-in-glass (PiG) films

A Novel Laser Based Display and Imaging Combined System

Rare Earth Ions Doped Optical Functional Glass and Application (Invited)

Novel Color Converters for High Brightness Laser‐Driven Projection Display: Transparent Ceramics–Glass Ceramics Film Composite

Development On Laser Display Technology

A Hierarchical Structure Perovskite Quantum Dots Film for Laser‐Driven Projection Display

Research Progress of Blue-Green Single-Frequency Laser

Research Progress in Solid-State Lasers Based on Rare Earth Ion-doped Oxyfluoride Glass Ceramics

Laser 3d Display System Based On Improved Polarization Compensated Lcos Optical Engine