Abstract:Based on a high-speed spark ignition (SI) gasoline engine with five valves, a novel concept of asynchronous valves timing (AVT) and synchronous valves timing (SVT) systems has been proposed. In order to demonstrate the effect of AVT and SVT on gas exchange process, combustion process, engine performance, fuel economy and emissions, a comparative study between AVT and SVT systems are conducted by using computational fluid dynamics (CFD) simulation and experiment. Considering the disadvantages of original cam profile, the intake and exhaust cam profile are redesigned. The valve train would be able to work more steadily and reliably under the high speed movement condition after optimized. Followed experiments for the AVT and SVT schemes were performed under full load to measure engine performance and operating parameters. Finally, in order to study the in-cylinder working process, a numerical calculation was conducted by using the CFD code AVL-FIRE. Additionally, a GT-Power simulation model was set up and calibrated by experimental data to study the impact of AVT and SVT on gas exchange process and secure accurate boundary conditions for the CFD calculation. The simulation results show that AVT scheme can strengthen in-cylinder gas rotational flow, increase gas turbulence kinetic energy (TKE) at the ignition timing, which is beneficial to increase the flame propagation speed. The IVC timing can significantly affect the in-cylinder pressure and heat release rate. With late IVC, both the mass flow rate and the peak in-cylinder pressure of retarding 20 degrees CA opening are decreased. The experimental results show that the engine torque, BSFC, CO and HC emissions of advancing 20 degrees CA opening are better than those under retarding 20 degrees CA opening and SVT at full load. However, NOx and CO2 emissions are worse than those of the other two schemes. (C) 2016 Elsevier Ltd. All rights reserved.

Simulation and Analysis of Variable Valve Timing Technology in SI Engine

A Prediction Study on the SI Engine Characteristics Using the Variable Valve Timing

One Dimensional Numerical Simulation of SI HCNG Engine

Performance Analysis and Optimization of a 2.0L Gasoline Engine based on GT-Power Simulation

Simulation Analysis of Injection Procedure Parameters on Diesel Engine Performances under Extreme Environment

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Research on Performance of Variable Intake System of Motorcycle Engine

The Prediction of Spark-Ignition Engine Performance and Emissions Based on the SVR Algorithm

Simulation Analysis of the Direct Injection Engine Performance and Experimental Research

Assessment of a synergistic control of intake and exhaust VVT for airflow exchange, combustion, and emissions in a DI hydrogen engine

Effect of Asynchronous Valve Timing on Combustion Characteristic and Performance of A High Speed Si Marine Engine with Five Valves

3D Numerical Simulation on Intake Process of Four Valve Diesel Engine

Study on Intake Performance of SI Engine with Fully Variable Valve Hydraulic Actuation System

A Modelling Study into the Effects of Variable Valve Timing on the Gas Exchange Process and Performance of a 4-Valve DI Homogeneous Charge Compression Ignition (HCCI) Engine

Simulation Research on Post-Injection of Electronically Controlled Heavy-Duty Diesel Engine

Valve Timing Design and Experiment Research on a Gasoline HCCI Engine

An Experimental Study on SICI Combustion in Gasoline Direct Injection Engine with Variable Valve Timing

The Research and Simulation on Flow Characteristic of Variable Intake System of Motorcycle Engine

Study on Variable Intake Tube of Electronic Injection Engine

Simulation of the Effect of Fuel Injection Rate that Matches Fuel Injection Advanced Angle on the Performance of Ultra High Pressure Common Rail Diesel Engine