Abstract:When modeling the energy performance of existing buildings, model calibration always serves as an essential and necessary step to ensure the accuracy and applicability of building models. Model calibration for detailed energy models, which is also known as calibrated simulation (CS), refers to the process of tuning model's input parameters to narrow down the mismatch between the simulation result and the real-monitored data of building energy consumptions. Two major problems of current CS are: (1) a successful calibration requires HVAC domain knowledge of modelers. (2) Traditional building calibration process is labor-intensive and time-consuming. To solve these problems, a normative energy modeling based quick auto-calibration approach is proposed in this study. This approach is able to reduce the modeling time and simplify the calibration procedures. Firstly, this paper demonstrates the working principles and the credibility of Normative Energy Modeling (NEM). Then, the methodology of the proposed quick auto-calibration approach is elaborated. The energy performance model of a large hotel located in Shanghai, China with NEM is used as a case study to investigate the effectiveness of the proposed quick auto-calibration approach. The simulation result of the case study suggests that the proposed approach can significantly simplify the procedures of model calibrations while still achieve a good accuracy specified by ASHRAE Guideline 14 [1]. Besides, the results further confirm that such method requires much less time and computational power for modeling, compared with other counterparts (e.g., “Autotune” calibration [2]). With the advantage of speed and accuracy, the auto-calibration proposed in this paper is promising to be applied in both engineering and research field.

Calibrated Building Energy Simulation and Its Application in a High-Rise Commercial Building in Shanghai

THE APPLICATION OF BUILDING ENERGY SIMULATION AND CALIBRATION IN TWO HIGH-RISE COMMERCIAL BUILDINGS IN SHANGHAI

Economic Analysis of Energy-Saving Renovation Measures for Urban Existing Residential Buildings in China Based on Thermal Simulation and Site Investigation

Seasonal Energy Performance Evaluation with New Perspective on Partial-Coupling Ejection-Compression Solar Cooling System for Modern City Buildings

Application and evaluation of a pattern-based building energy model calibration method using public building datasets

Energy model calibration in an office building by an optimization-based method

Energy consumption analysis and energy efficiency evaluation for a commercial building in Shanghai

Energy Modeling of Two Office Buildings with Data Center for Green Building Design

Towards Fast Energy Performance Evaluation: A Pilot Study for Office Buildings

Energy Consumption Baselining and Benchmarking of Green Office Buildings in Shanghai

Reference Building Energy Modeling: A Case Study for Green Office Buildings in Shanghai

Energy Model Calibration For Campus Office Buildings

Regression Analysis Of High Rise Air-Conditioned Office Building Energy Use

SIMULATION-BASED METHOD TO ASSESS BUILDING ENERGY CONSUMPTION LEVEL AT OPERATION STAGE

Development Of Energy Efficiency Assessment Methods For Commercial Office Building In Shanghai

A Quick Auto-Calibration Approach Based on Normative Energy Models

Whole Building Energy Simulation and Energy Saving Potential Analysis of A Large Public Building

Elaboration of energy saving renovation measures for urban existing residential buildings in north China based on simulation and site investigations

An automated optimization method for calibrating building energy simulation models with measured data: Orientation and a case study

DeST-based Dynamic Simulation and Energy Efficiency Retrofit Analysis of Commercial Buildings in the Hot Summer/cold Winter Zone of China: A Case in Nanjing

Assessment of energy-saving technologies retrofitted to existing public buildings in China