Abstract:Objective: To measure and compensate for soft tissue deformation during image-guided neurosurgery, we have developed a novel approach to estimate the three-dimensional (3-D) topology of the cortical surface and track its motion over time. Methods: We use stereopsis to estimate the 3-D cortical topology during neurosurgical procedures. To facilitate this process, two charge-coupled device cameras have been attached to the binocular optics of a stereoscopic operating microscope. Before surgery, this stereo imaging system is calibrated to obtain the extrinsic and intrinsic camera parameters. During surgery, the 3-D shape of the cortical surface is automatically estimated from a stereo pair of images and registered to the preoperative image volume to provide navigational guidance. This estimation requires robust matching of features between the images, which, when combined with the camera calibration, yields the desired 3-D coordinates. After the 3-D cortical surface has been estimated from stereo pairs, its motion is tracked by comparing the current surface with its previous locations. Results: We are able to estimate the 3-D topology of the cortical surface with an average error of less than 1.2 mm. Executing on a 1.1-GHz Pentium machine, the 3-D estimation from a stereo pair of 1024 x 768 resolution images requires approximately 60 seconds of computation. By applying stereopsis over time, we are able to track the motion of the cortical surface, including the pulsatile movement of the cortical surface, gravitational sag, tissue bulge as a result of increased intracranial pressure, and the parenchymal shape changes associated with tissue resection. The results from 10 surgical patients are reported. Conclusion: We have demonstrated that a stereo vision system coupled to the operating microscope can be used to efficiently estimate the dynamic topology of the cortical surface during surgery. The 3-D surface can be coregistered to the preoperative image volume. This unique intraoperative imaging technique expands the capability of the current navigational system in the operating room and increases the accuracy of anatomic correspondence with preoperative images through compensation for brain deformation.

A Surface Topology and Motion Compensation System for Microsurgery Guidance and Intervention Based on Common-Path Optical Coherence Tomography

Endoscopic Optical Coherence Tomography Angiography Using Inverse SNR-amplitude Decorrelation Features and Electrothermal Micro-Electro-mechanical System Raster Scan

Motion-Compensated Hand-Held Common-Path Fourier-Domain Optical Coherence Tomography Probe For Image-Guided Intervention

Swept Source Intraoperative OCT Angiography

Accurate Real-Time Depth Control for CP-SSOCT Distal Sensor Based Handheld Microsurgery Tools

Depth-resolved Transverse-Plane Motion Tracking with Configurable Measurement Features Via Optical Coherence Tomography.

Soft-Tissue Motion Tracking And Structure Estimation For Robotic Assisted Mis Procedures

Motion-Compensated Autonomous Scanning for Tumour Localisation using Intraoperative Ultrasound

Self Optical Motion-Tracking For Endoscopic Optical Coherence Tomography Probe Using Micro-Beamsplitter Probe

Cooperative In Situ Microscopic Scanning And Simultaneous Tissue Surface Reconstruction Using A Compliant Robotic Manipulator

Minimizing OCT quantification error via a surface-tracking imaging probe

Real-time three-dimensional Fourier-domain optical coherence tomography video image guided microsurgeries.

High dynamic range 3D motion tracking based on circular scan with optical coherence tomography

Optical coherence tomography-based design for a real-time motion corrected scanning microscope

Adaptive contour-tracking to aid wide-field swept-source optical coherence tomography imaging of large objects with uneven surface topology

Cortical surface tracking using a stereoscopic operating microscope

System Calibration and Pose Optimization for Robotic-Arm-assisted Optical Coherence Tomography

Subpixel Motion Artifacts Correction and Motion Estimation for 3D-OCT.

Evaluation of Artifact Reduction in Optical Coherence Tomography Angiography with Real-Time Tracking and Motion Correction Technology.

Real‐time Motion Tracking in Image‐guided Oral Implantology

Design and analysis of a combined micro-computed tomography and optical structured light system for breast conserving surgery specimen margin imaging