Abstract:The Ni-50Cr coatings are prepared under different plasma spray conditions which are arranged according to the orthogonal experimental design method using three typical parameters of plasma arc current, Ar flow and spray distance in order to obtain the quantitative regression correlations between spray parameter and coating mechanical properties, and examine the relationship between the mechanical properties and microstructure features. The mechanical properties of sprayed Ni-Cr coatings are characterized by hardness, abrasive wear weight loss and erosion rates. The microstructure of the coatings is examined by optical and electron scanning microscopes. The porosity in the coating is quantitatively estimated from by the increase in Cr content of the coating after the impregnation of Cr2O3 into pores of the coating. The effects of spray parameters on the mechanical properties of the coating are discussed according to regression formulas systematically.The results evidently show that three typical parameters have significant inter-effects on the microstructure and properties of the Ni-Cr coatings. There are evident correlations among the hardness and abrasive wear resistance, and porosity for plasma sprayed Ni-Cr coatings. With the decrease in the porosity of the coating, the hardness and abrasive wear resistance of the Ni-Cr coating are increased. On the other hand, there are no correlations between erosion resistance and hardness, and porosity as well. It has been found that the abrasive wear occurs mainly by micro-cutting of abrasives while the erosion occurs mainly by the successive separation of flattened particles exposed to the surface which are subjected to the direct impact of erosive particles. Therefore, the abrasive wear resistance is primarily dependent on the density and hardness of the coating, while the erosion wear is mainly dependent on the condition of the cohesion between flattened particles. The results also revealed that the deposition of partially melted particles into the coating deteriorates the erosion resistance of the coating, especially at low impact angle.

Effect of Spray Distance on the Mechanical Properties of Plasma Sprayed Ni-45Cr Coatings

Tensile deformation behavior of plasma-sprayed Ni–45Cr coatings

Relationships Between Microstructure, Mechanical Properties of Plasma-sprayed Ni-50Cr Coatings and Spray Parameters.

Effect of Spraying Power on the Microstructure and Mechanical Properties of Supersonic Plasma-Sprayed Ni-based Alloy Coatings

Dependency of fracture toughness of plasma sprayed Al 2 O 3 coatings on lamellar structure

Porosity and effective mechanical properties of plasma-sprayed Ni-based alloy coatings

Porosity, Mechanical Properties, Residual Stresses of Supersonic Plasma-Sprayed Ni-Based Alloy Coatings Prepared at Different Powder Feed Rates

The Effect of Plasma Spray Parameters on the Quality of Al-Ni Coatings

The Microstructure and Deposition Behavior of NiCr Alloy Coatings Using Laminar Plasma Spraying

Evaluation of the Mechanical Properties of Plasma-Sprayed Coating by Nanoindentation Technology

Microstructure and tribological behavior of plasma spray Ni60 alloy coating deposited on ZL109 aluminum alloy substrate

Microstructural and Porosity Variations in the Plasma-Sprayed Ni-Alloy Coatings Prepared at Different Spraying Powers

Splash involved deposition behavior and erosion mechanism of long laminar plasma sprayed NiCrBSi coatings

Evaluation of Adhesion and Mechanical Properties of Plasma Sprayed NiCrAl/Al2O3-13wt.%TiO2 Coatings

Performance in Resistance to Surface Fatigue for Cr 3 C 2 –25%NiCr Coatings by Plasma Spray and CDS Spray

Structure and Tribology Characteristics of Plasma Sprayed Coating of Ni60A

Porosity and surface roughness simulation of nickel-aluminum coating in plasma spray forming

Particle Size-Dependent Microstructure, Hardness and Electrochemical Corrosion Behavior of Atmospheric Plasma Sprayed NiCrBSi Coatings

Effect of Critical Plasma Spray Parameter on Complex Permittivity and Microstructure by Plasma Spraying Cr/Al2o3 Coatings

Mechanical Performance of Plasma-Sprayed Bulk-Like NiCrMo Coating with a Novel Shell-Core-structured NiCr-Mo Particle

Plasma sprayed CoNiCrMoNb(BSi) high-entropy amorphous alloy coating: The effect of spraying power on microstructure, mechanical and tribological properties