Abstract:IPP hollow-fiber microporous membranes were prepared via thermally induced phase separation (TIPS) with cosolvent di-n-butyl phthalate (DBP) and dioctyl phthalate (DOP). The DOP mass fraction in co-solvent (α) and iPP mass fraction in a casting solution (β) were worked as the variables in the spinning process. With increasing α, the TIPS of the polymer solution changes to only polymer crystallization from liquid–liquid phase separation with subsequent polymer crystallization. Accordingly, the morphology of the resulting membrane changes from a typical cellular structure to a mixed structure, which is basically cellular but with particulate boundaries, and then a typical particulate structure. As a result, permeability of the membrane increases sharply and mechanical properties of the membrane decrease obviously. Therefore, the iPP hollow-fiber microporous membrane with higher permeability and higher mechanical properties must exhibit a mixed membrane morphology in which liquid–liquid phase separation precedes polymer crystallization. However, by varying β, both the phase separation pattern of the iPP solution and types of the resulting membrane structure cannot be changed. The permeability of resulting membrane decreases with increasing β, but the mechanical properties increase with increasing β. It is noted also that those iPP hollow-fiber microporous membranes are apt to possess a narrow pore size distribution. It is indicated that by choosing proper α and β, the membrane morphology can be an open cellular pore structure; moreover, the resulting membrane exhibits both higher permeability and higher mechanical properties. It is suggested that for a crystalline polymer such as iPP, by a proper approach, adjusting the competition between liquid–liquid phase separation and polymer crystallization is the key to creating the membrane with an interconnecting pore structure and good performance.

Effect of Diluent on the Morphology and Performance of IPP Hollow Fiber Microporous Membrane via Thermally Induced Phase Separation1

Effect of Diluent on Pore Size and Connectivity of Ipp Hollow Fiber Microporous Membranes Via Thermally Induced Phase Separation

Effects of Mixed Diluents on Isotactic Polypropylene Microporous Membrane Formation Via Thermally Induced Phase Separation Process

Preparation of Porous PVDF Membrane Via Thermally Induced Phase Separation with Diluent Mixture of DBP and DEHP

Preparation of Ipp Hollow-Fiber Microporous Membranes Via Thermally Induced Phase Separation with Co-Solvents of DBP and DOP

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Morphology and Permeability of Ipp Hollow Fiber Membrane Via Thermally Induced Phase Separation after Stretching

Morphology and Permeability of Ipp/nano-Sio2 Mixed Hollow Fiber Membrane Via Thermally Induced Phase Separation

Formation of microporous membrane of isotactic polypropylene in dibutyl phthalate-soybean oil via thermally induced phase separation

Formation of Isotactic Polypropylene Membranes with Bicontinuous Structure and Good Strength Via Thermally Induced Phase Separation Method

Effect of Polypropylene Molecular Weight on Microporous Membrane Formation Via Thermally Induced Phase Separation

The Effect of Diluent Mixture with Upper Critical Solution Temperature on Membrane Formation Process, Microstructure, and Performance of PVDF Hollow Fiber Membrane by TIPS Process

Preparation of PVDF Membranes via TIPS Method: The Effect of Mixed Diluents on Membrane Structure and Mechanical Property

Effect of Nucleating Agents on Morphology and Permeability of Ipp Porous Membranes Via Thermally Induced Phase Separation

Structure formation and characterization of PVDF hollow fiber membrane prepared via TIPS with diluent mixture

Dissipative Particle Dynamics Study and Experimental Verification on the Pore Morphologies and Diffusivity of the Poly (4-Methyl-1-pentene)-diluent System Via Thermally Induced Phase Separation: the Effect of Diluent and Polymer Concentration

Polypropylene-poly(lactic acid)hollow fiber membrane by thermally induced phase separation and its performance test

Formation of anisotropic microporous isotactic polypropylene (iPP) membrane via thermally induced phase separation

Effect of diluents on the crystallization behavior of poly(4-methyl-1-pentene) and membrane morphology via thermally induced phase separation

Membrane formation of poly(vinylidene fluoride)/poly(methyl methacrylate)/diluents via thermally induced phase separation

Preparation and Characterization of Microporous PVDF Membrane by Thermally Induced Phase Separation from a Ternary Polymer/solvent/non-Solvent System