Abstract:In the typical Power over Ethernet (PoE) system, the conventional powered device (PD) with two-pair architecture can only provide power below 20 W to the distant loads, which greatly restricts its applications in many areas. An advanced type of four-pair architecture with an input current balance function for the PoE system is proposed in this paper to not only improve the power level, but also achieve the high conversion efficiency. The steady-state model of the four-pair architecture is built to explore the existing imbalance problem, which is mainly caused by the structure and impedance inconsistency. The proposed four-pair architecture consists of two main converter modules operated in parallel. An input current balance scheme is adopted to reduce the difference of both primary currents, which can increase the transmission power and improve the current sharing performance. Furthermore, the small-signal model of the paralleled converters with an input current balance control strategy is constructed to give a design guideline for the control loop. Finally, a 50-W prototype is built and tested to verify the effectiveness of the presented architecture and control strategy.

Research on Power over Ethernet System and the Technology of Power Expansion

A Design of Powered Device Interface Chip under PoE System

Design of Power Assign Manager for Remote Power Supply Based on Network Line

A PoE (Power over Ethernet) Switching Power

Design Issues Of Building Block Structure Communications For Power Electronic System

Study on Networked Control for Power Electronic Systems

Switch Technology in Intelligent Substation

Advanced Four-Pair Architecture with Input Current Balance Function for Power over Ethernet (poe) System

Application of Power over Ethernet Based on PD64012 DIMM

50W Power Device (PD) power in Power over Ethernet (PoE) system with input current balance in four-pair architecture with two DC/DC converters

Distributed Power Control Architecture and System Integration

Study on Power Exchange Node and Its Application

Design and Configuration of PoE Switch

Development of Fire Detection System Based on Power over Ethernet

Research of Power-On Detection in POE Topology

Research of Smart Distribution Network Based on EPON Communication Technology

Conception and Technology for the Smart (autonomous) Internet of Power Consumption Equipments Part 3:Key Technologies of Powerline Communications

Study On Ethernet Communication Strategy For Electric Energy Data Acquisition System

泛在电力物联网下用户侧分布式电源P2P优化调度研究

Power-Aware Networking

Research on Construction and Application of Power Distribution Internet of Things