Effects of calcium-to-silicon ratio on the properties of fly ash-based tobermorite and its removal performance of Zn2+ and Mn2+
Zehua Wang,Ningning Su,Boying Zheng,Yiwen Liu,Tianjun Qian,Daishe Wu
DOI: https://doi.org/10.1007/s11356-024-33837-2
IF: 5.8
2024-05-31
Environmental Science and Pollution Research
Abstract:The effects of calcium-to-silicon ratio on the properties of fly ash (FA)-based tobermorite and its removal performance of Zn 2+ and Mn 2+ were studied. The calcium-to-silicon ratio had a significant effect on the structural properties of the tobermorite samples. The specific surface area, pore volume, and average pore size of mesoporous tobermorite samples with different calcium-to-silicon ratios (0.8TOB, 1.2TOB, and 1.6TOB) were much larger than those of FA, and those of 1.2TOB were the largest, which were 53.29 m 2 /g, 0.448 cm 3 /g, and 30.50 nm, respectively. The removal efficiencies of Zn 2+ and Mn 2+ by 1.2TOB were 84.19% and 47.67%, respectively, which were much higher than those of 0.8TOB (60.62% and 42.41%), 1.6TOB (46.69% and 24.31%), and FA (4.13% and 6.95%). The adsorption of Zn 2+ and Mn 2+ by 0.8TOB, 1.2TOB, and 1.6TOB was corresponding to the pseudo-second-order kinetic model and Langmuir isotherm model. Particularly, 1.2 TOB showed the highest maximum adsorption capacities of Zn 2+ and Mn 2+ calculated from the Langmuir model, which were 129.70 mg/g and 82.09 mg/g, respectively. Moreover, the adsorption mechanisms might be due to the combination with –OH and the interlayer adsorption of the samples. This research provides new insight into the fly ash-based adsorbents towards Zn 2+ and Mn 2+ in wastewater.
environmental sciences