Abstract:With the development of ultrafast science and attosecond laser technology,the pump-probe system based on isolated attosecond laser pulses is a key to attosecond science,which will be used to study electronic dynamics on an attosecond time-scale.To obtain stable and reliable signals,it is necessary to ensure ultra-stable and ultra-accurate synchronization.Any timing jitter can cause signal to disperse or get buryied in noise,making it impossible to obtain the true physical mechanism.Based on the above,the delay between pump laser pulse and probe laser pulse must be controlled with an attosecond time resolution.In this work,a dual-layer system is developed to achieve high-precision synchronization locking.To ensure that both layers have the same time jitter,we design an adapter to secure the elements placed during installation.Timing jitter is obtained by shaking interference fringes through fast Fourier transformation,and can be calculated in several ms.Then error signals are fed back to the PZT stage in order to compensate for real-time optical path drift.Through such a design,a time-delay accuracy of 7.64 as to 15.53 as is realized,which is linearly related to the interferometer arm length ranging from 1 m to 5 m,with an R2 of 0.96.Moreover,the error between the experimental result of arm length of 8 m and 10 m and the result fitted with the above data is less than 3 as.These results show that using a small interferometer can achieve the fast detection of the time-delay accuracy of long-arm attosecond pump-probe detection system in large scientific instrument,which is of great significance in guiding ther applications such as in non-collinear attosecond streaking spectroscopy,time-resolved photoelectron spectroscopy,and coherent synthesis.

Synchronization and Relative Timing Jitter Measurement of Femtosecond and Picosecond Laser Regenerative Amplifiers

Yoctosecond Timing Jitter Sensitivity in Tightly Synchronized Mode-Locked Ti:Sapphire Lasers

Jitter-calibrated Second-Order Correlation Measurement for Pulsed Excitation with Low Repetition Rate

Timing Jitter in a Kilohertz Regenerative Amplifier of a Femtosecond-Pulse Ti:Al(2)O(3) Laser.

Subfemtosecond hybrid synchronization between ultrafast Yb and Er fiber laser systems by controlling the relative injection timing

Long-term Stable F Iber–based Picoseconds Optical Synchronization System in SG-II

Fs-Level Laser–rf Synchronization with a Fiber-Loop Optical-Microwave Phase Detector

Independently tunable 1.3 W femtosecond Ti:sapphire lasers passively synchronized with attosecond timing jitter and ultrahigh robustness.

Synchronization of Two Passively Mode-Locked, Picosecond Lasers Within 20 Fs for Coherent Anti-Stokes Raman Scattering Microscopy

Laser–RF Synchronization Based on Digital Phase Detector

Precise Control and Measurement of Laser–RF Synchronization for Thomson-scattering X-ray Source

Transfer of Laser Frequency from 729 Nm to 1.5 Μm with Precision at the Level of 10-20

Optically synchronized fiber links with spectrally pure integrated lasers

Sub-Femtosecond Timing Jitter from a SESAM Mode-Locked Yb-Fiber Laser

Attosecond Delay Locking of Large Arm Pump-Probe System

Highly Stable Synchronized Femtosecond Ti:sapphire Laser with 1.3 W Powers and Sub-Femtosecond Timing Jitter

Development of Sub-100 Femtosecond Timing and Synchronization System.

Femtosecond Precision Measurement of Laser–rf Phase Jitter in a Photocathode Rf Gun

Attosecond Timing Jitter from an NALM Mode-Locked Er:Fiber Laser on “optical Cubes”

Timing Jitter Measurement of Transmitted Laser Pulse Relative to the Reference Using Type Ii Second Harmonic Generation in Two Nonlinear Crystals

A Digital and Compact High-Precision Locking System for Pulse Laser Repetition Frequency