Abstract:Hydrostatic guideways have various applications in precision machine tools due to their high motion accuracy. The analysis of motion straightness in hydrostatic guideways is generally ignoring the external load on the slider. A variation force also exists, caused by the different working positions, together with the dead load of the slider and that of other auxiliary devices. The effect of working position on vertical motion straightness is investigated based on the equivalent static model, considering the error averaging effort of pressured oil film in open hydrostatic guideways. Open hydrostatic guideways in LGF1000 are analyzed with this approach. The theoretical results show that the slider has maximum vertical motion straightness when the working position is closer the guiderail of Y axis. The vertical motion straightness reaches a minimum value as the working position is located at the center of the two guiderails on the Y axis. The difference between the maximum and minimum vertical motion straightness is 34.7%. The smaller vertical motion straightness is attributed to the smaller spacing of the two pads centers, along the Y direction. The experimental results show that the vertical motion straightness is 4.15 μm/1200 mm, when the working position is located in the middle of the X beam, and 5.08 μm/1200 mm, when the working position is approaching the Y guiderails, denoting an increase of 18.3%. The changing trends of the measured results validate the correctness of the theoretical model. The research work can be used to reveal the variation law of accuracy of the open hydrostatic guideways, under different working positions, to predict the machining precision, and provides the basis for an error compensation strategy for gantry type grinding machines.

Error Analysis and Compensation of a Full Automatic Horizontal Straightrner

Graded Error Compensation Method for Heavy-Load Manipulators Based on Laser Tracking Measurement

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Load-stroke Model for Straightening the Warpage of T-rail

Modeling, simulation and experiment for straightening lateral bending of elevator guide rail

Error Analysis and Modeling of Monolithic Micromanipulator

Measuring Error Correction Method During Deflection Measurement Process of the Regular Hexagon Section Shaft Based on Lever-Type Measuring Mechanism

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Straightness error modeling and compensation for gantry type open hydrostatic guideways in grinding machine

Modeling for straightness error of large CNC gantry type machine tools and error compensation

Establishment and Application of Load-Deflection Model of Press Straightening

Error Synthesis Model and Analysis for Heavy-Duty CNC Double Column Vertical Lathe

F Test-Based Automatic Modeling of Single Geometric Error Component for Error Compensation of Five-Axis Machine Tools

Thermal Deformation Errors Compensation System of Machine Tools

Research on Geometric Error Modeling and Error Compensation Technique of Horizontal Machine Tools

Effect of Working Position on Vertical Motion Straightness of Open Hydrostatic Guideways in Grinding Machine

Analysis on Geometry Error Software Compensation Technology Model of Gantry Five-Axis NC Machine Tool

The theoretical model of straightness error in gun drilling of small diameter and deep hole

Straightness Error Compensation for Large Cnc Gantry Type Milling Centers Based on B-Spline Curves Modeling

An Improved Method for Straightness Error Modeling and Compensation in CNC Machining Center

Modeling of CNC machine tool line rail assembly accuracy and its control method