Abstract:In a digital control system for magnetic bearings, because of factors such as switching currents of a power amplifier, an input signal of the system will be mixed with noise and the signal should be filtered. If the sampling rate of the system for the input signal is not high enough, a filter used will introduce a large delay between its output and input signal. To solve this problem, one way is to sample the input signal multiple times at the beginning of every control period and get a filtered signal by average methods. Then the response speed of the bearing controller would not be influenced. A FPGA-based expanded circuit was designed for this purpose and it was added to a DSP control board as a component of the control platform. Without increasing computational burden of the DSP, the FPGA obtained oversampled signals and processed them by its rich on-chip resources. Meanwhile, in order to view the sampled signals and monitor the system online, the circuit was also equipped with a SDRAM to store the sampled data. This design had a simple structure and reliable performance. Experimental results showed that the circuit could achieve the required signal oversampling and the subsequent data processing and the signal noise was effectively reduced.

Signal Processing and Controlling System Based on DSP56311

Design of VxWorks-based High-performance Embedded Control Platform

High frequency signal acquisition and control system based on DSP+FPGA

STUDY ON A NEW TYPE UNIVERSAL CONTROLLER FOR POWER SYSTEM

Design of DSP-FPGA Based on Control System for Power Quality Controller

Design of DSP Peripheral Controller Based on CPLD

Design and Implementation of Digital Signal Processing Module Based on Pci Bus and Fpga

Implementation of a No Pulse Competition CPS-SPWM Technique Based on the Concentrated Control for Cascaded Multilevel DSTATCOMs

High Speed Data Sample and Controller with Two DSPs

Interface Circuit Design for Multi-Dsp System Based on FPGA

Design and Implementation of FPGA Based High-Speed Bus for Control System

Development of signal processing system based on DSP and FPGA

Design and Implementation of Serial Communication Based on DSP

Design of humanoid robot control system based on DSP and FPGA

A Bus-structure Flight Control System Based on DSP

Design and Implementation of a Certain Digital Flight-control Interface Acquisition Unit

Design and Implementation of High-Speed Real-Time Communication Architecture for PC-Based Motion Control System.

Cab-load Wayside Signal Detection System Based on DSP

Design of infrared guidance control information data processing system based on dual DSP chips

Fpga-Based Expanded Circuit Design for Dsp Signal Processing

Design and Research on Four-axis Motion Controller Based on DSP and FPGA