Abstract:For high-speed traveling-wave modulator, impedance match, velocity match and low microwave attenuation are important. But they have different effects on bandwidth for different structure and scheme for quantum well electroabsorption modulator and bulk Mach-Zehnder electrooptic modulator. For bulk Mach-Zehnder electrooptic modulator, the longer active waveguide is needed, and at such situation, according to the normalized gain (or modulation reduction factor) the velocity match and impedance match and low microwave attenuation should be well satisfied to achieve good performance. While for the quantum well electroabsorption modulator, limited by the optical loss, short active waveguide must be used. When the device length is largely reduced match requirement is not so strict and it is also difficult to achieve good match. Low terminator electroabsorption modulator is reported recently. Its concept could be inferred from the normalized gain formula. And some technology tendency in traveling-wave electroabsorption and Mach-Zehnder modulator could be also obtained and could explain series of experiment. From calculation and experiment the low impedance and low terminator could expand the bandwidth by slight mismatch. The relation of modulator characteristic impedance, microwave phase velocity and microwave attenuation is not much considered for simplification. The results are useful to design and optimize modulator.

Theoretical analyses and optimizations for wavelength conversion by quasi-phase-matching difference frequency generation

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Bandwidth enhancement and response flattening of cascaded sum- and difference-frequency generation-based wavelength conversion

Flattening of Cascaded Sum- and Difference-Frequency Generation-Based Wavelength Conversion by Pump or Period Detuning

Broadband Wavelength Conversion for Mode-Division-Multiplexing Signals in a Width-Modulated Quasi-Phase-Matching Multimode Silicon Waveguide

Different Effects on Bandwidth for Traveling-Wave Quantum Well Electro-Absorption Modulator and Bulk Mach-Zehnder Electric-Opto Modulator

Analysis of Power-Dependent Phase-Matched Four-Wave Mixing in Dispersion-Managed Transmission Systems

Bandwidth Enhancement in Difference Frequency Generation by Domain-Shifted Quasi-Phase-Matching Structure

Numerical Analysis For Four-Wave Mixing Based Wavelength Conversion Of Differential Phase-Shift Keying Signals

Comparison of Interchannel Pulses Four-Wave Mixing in SMF, NZDSF and HNLF

Theoretical Study for Wavelength Conversion of Cascaded Second-Order Nonlinearity in Silica Fiber

Power-Attenuated Optimization for Four-Wave Mixing-Based Wavelength Conversion in Silicon Nanowire Waveguides

Comparison of interchannel four-wave mixing with continuous waves, quasi-continuous waves and ultrashort pulses

Performance Analysis of the Wavelength Converter Based on Differential Cross-Phase-modulation

Theoretical Analysis on the Enhancement of One-Third Harmonic Generation in Quasi-Phase-matching Schemes Based on Modal Dispersion Modulation

Quasi-phase-matched (QPM) difference frequency generation in a mirrorless counterpropagating configuration

Theoretical and Experimental Study on Commensurable Dual-Periodic Optical Superlattice for Multiple Frequency Conversions

Optical Switching and Amplification in Counter-Propagating Difference Frequency Generation

Travelling wave analysis on high-speed performance of Q-modulated distributed feedback laser.

Study on Phase Matching Condition at Pump Depletion in Four-wave Mixing

Optimal Design of DFG-based Wavelength Conversion Based on Hybrid Genetic Algorithm.