Abstract:Pultruded fiber–reinforced plastic (FRP) composite structural shapes (beams and columns) are thin-walled open or closed sections consisting of assemblies of flat plates and commonly made of E-glass fiber and either polyester or vinylester resins. Due to high strength-to-stiffness ratio of composites and thin-walled sectional geometry of FRP shapes, buckling is the most likely mode of failure before material failure. In this paper, explicit analyses of local buckling of rectangular orthotropic composite plates with various unloaded edge boundary conditions (i.e., (1) rotationally restrained along both unloaded edges (RR), and (2) one rotationally restrained and the other free along the unloaded edges (RF)) and subjected to uniform in-plane axial action at simply-supported loaded edges are first presented. A variational formulation of the Ritz method is used to establish an eigenvalue problem, and explicit solutions of plate local buckling coefficients in term of the rotational restraint stiffness (k) are obtained. The two cases of rotationally restrained plates (i.e., the RR and RF plates) are further treated as discrete plates of closed and open sections, and by considering the effect of elastic restraints at the joint connections of flanges and webs, the local buckling of different FRP shapes under uniform axial compression is studied. The approximate expressions of the rotational restraint stiffness (k) for various common FRP sections are provided, and their application to sectional local buckling predictions is illustrated. The explicit local buckling formulas of rotationally restrained plates are validated with the exact transcendental solutions. The analytical predictions for local buckling of various FRP profiles based on the present discrete plate analysis and considering the elastic restraints of the flange–web connections are in excellent agreements with available experimental results and finite element eigenvalue analyses. A design guideline for local buckling prediction and related performance improvement is proposed. The present explicit formulation can be applied effectively to determine the local buckling capacities of composite plates with elastic restraints along the unloaded edges and can be further used to predict the local buckling strength of FRP shapes.

Local Buckling of Composite Fiber-Reinforced Plastic Wide-Flange Sections

Explicit local buckling analysis and design of fiber–reinforced plastic composite structural shapes

Local Buckling of Elastically Restrained Fiber-Reinforced Plastic Plates and its Application to Box Sections

Analytical and Experimental Study of Lateral and Distortional Buckling of FRP Wide-Flange Beams

Elastic Local Buckling and Width-to-Thickness Limits of I-Beams Incorporating Flange–Web Interactions

Post-local-buckling of fiber-reinforced plastic composite structural shapes using discrete plate analysis

Distortional and Lateral Buckling of Z-Purlins with Sloping Lips in Flexure

A unified analysis for distortional and lateral buckling of C-purlins in flexure

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Local buckling analysis of restrained orthotropic plates under generic in-plane loading

Elastic Buckling of Web Restrained by Flanges in I-section Members

EXPERIMENTAL AND ANALYTICAL EVALUATION OF LATERAL BUCKLING OF FRP COMPOSITE CANTILEVER I-BEAMS

Flexural-Torsional Buckling of Pultruded Fiber Reinforced Plastic Composite I-Beams: Experimental and Analytical Evaluations

EXPLICIT LOCAL BUCKLING ANALYSIS OF ROTATIONALLY RESTRAINED COMPOSITE PLATES UNDER BIAXIAL LOADING

Buckling analysis of cantilever pultruded I-sections using ANSYS

Buckling of Partially-Compressed Laminated Composite Plates

Buckling analysis of restrained orthotropic plates under combined in-plane shear and axial loads and its application to web local buckling

Explicit Local Buckling Analysis of Rotationally- and Vertically-Restrained Orthotropic Plates under Uniaxial Compression

Flexural–torsional buckling of fiber-reinforced plastic composite open channel beams

Behavior Analysis of FRP Tube/filling Strengthened Steel Members under Axial Compression