Abstract:Effect of varying surface structures of the inner rotating cylinder on characteristics of droplet formed in a liquid-liquid Taylor-Couette (TC) reactor is investigated. Two novel surface structures of inner cylinders, designed with axially corrugated surface (N40) and with typical three-dimensional roughness (NZ40), respectively, were adopted for the investigation. The high-speed camera visualization was used to measure the droplet size while CFD modelling was applied to predict the fluid dynamics of TC flows with such two inner cylinders and a smooth surface inner cylinder, thus revealing the effect of inner cylinder configuration on the droplet formation in the TC flows. The experimental results have clearly indicated that both the rotation speed and surface configuration variation of the inner cylinders affect the generated droplet size and distribution. As the rotation speed increases, the droplet size is obviously reduced for all types of inner cylinder configurations. Compared with the conventional smooth surface inner cylinder, the two new types of inner cylinders with special surface structures can produce much smaller droplets, especially for the case of N40 surface structure inner cylinder, with which the smallest droplet size was found at all the experimental conditions. CFD modelling results have demonstrated that the surface configurations of inner cylinder can significantly affect the turbulence generation, consequently altering the distributions of turbulent kinetic energy and local turbulence shear strain rate. As a result, the droplet size was found to be controlled by the change of the local turbulent dissipation rate that was strongly associated with the surface structures of inner cylinders. Empirical correlations that correlate the droplet size with the Weber number and Reynolds number were proposed based on the high-speed camera visualization data.(c) 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).

Inner Flow Behavior in an Oscillating Liquid Droplet

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

Numerical Study on Droplet Deformation in Periodic Pulsatile Shear Flow and Effects of Inertia

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Effect of Inner Cylinder Configuration on Liquid Droplet Dispersion and Size Distributions in a Taylor-Couette Reactor

Inner circulation flow characteristics of coalescence droplets in microchannel

Modeling Internal Flow Patterns of Sessile Droplets on Horizontally Vibrating Substrates

Numerical simulation of oscillatory falling liquid film flows

A Quantitative Method to Describe the Flow Characteristics of an Oscillating Flow Including Porous Media

Oscillation Characteristics of Droplets on Solid Surfaces with Air Flow

Transition of buoyancy-driven flow from an axisymmetric to non-axisymmetric vortex inside an evaporating sessile droplet

Dynamics of Cylindrical Particles in the Contraction Flow of a Second-Order Fluid

Phase-field simulations for dripping-to-jetting transitions: Effects of low interfacial tension and bulk diffusion

A falling fluid droplet in an oscillating flow field

Internal flow in sessile droplets induced by substrate oscillation: towards enhanced mixing and mass transfer in microfluidic systems

Numerical Simulation of Droplet Deformation in Convective Flows

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

Experimental and Numerical Study of Mixing Behavior Inside Droplets in Microchannels

Ultrasonic oscillatory two-phase flow in microchannels

FLOW STRUCTURES DUE TO STATIC AND OSCILLATING DIMPLES IN CHANNEL FLOWS

Internal Flow in Evaporating Droplet on Heated Solid Surface