Simulation test for metering process of horizontal disc precision metering device based on discrete element method
Shi Linrong,Wu Jianmin,Sun Wei,Zhang Fengwei,Sun Bugong,Liu Quanwei,Zhao Wuyun
DOI: https://doi.org/10.3969/j.issn.1002-6819.2014.08.005
2014-01-01
Abstract:In order to optimize the best metering parameters on the performance of horizontal disc precision metering device (The rate of moving metering plate, thickness of moving metering plate, fillet radius of type hole), a simulation model of horizontal disc precision metering device was designed with Solidworks. The average size of Gansu common 3 corn grains were reported in statistics, namely the length is 10.86 mm, and the width is 7.22 mm, and the thickness is 5.12mm. In accordance with which the model of corn grain was designed with the use of slice modeling techniques, and using the spherical particles aggregation method the discrete model of corn grain was established. Poisson’s ratio, shear modulus and density of corn were determined by test. Namely poisson’s ratio is 0.357, and shear modulus is 2.6 MPa, density is 1 250 kg/m3. To increase the qualified index of seed space and reduce the replay and miss-seeding index, and depress the intensity of field test, on the basis of DEM dynamic simulation metering experiment of horizontal disc precision metering were conducted. Experimental results show:with higher the qualified index of seed space as the key point and taking lower the multi-seed index and the no-seed index into consideration, the bigger the qualified index of seed space is better, and the smaller the multi-seed index and the no-seed index is also better. Variance analysis showed the factor A, B and C had conspicuous effect on the qualified index of the seed space S, and the factor B had conspicuous effect on the multi-seed index D, and the factor A and C had significant influence on the no-seed index M, the factor B, interaction between A factor and C factor had a conspicuous effect on the no-seed index M. The speed of the moving metering plate is 17 r/min and the thickness of the moving seed metering plate is 6mm and the fillet radius of the type hole is 1 mm, was selected as an optimal combination. Under the conditions, the qualified index of seed space was 97.05%, and the multi-seed index was 1.83%, and the no-seed index was 1.12%. The optimized parameters of the simulation experiment were verified in the test trial. Field test results showed: under the conditions, the qualified index of the seed space was 95.13%, and the multi-seed index was 2.34%, and the no-seed index was 2.78%. In comparison with the simulation results, the error of the qualified index of the seed space was 2.02%. Therefore, simulation test of the horizontal disc precision metering device has certain guiding significance to develop the performance of the metering parameters device. It provided a reference method for optimizing the other types of precision metering.