Abstract:This paper proposes an approach to parallel filling path generation based on adaptive gaps for fused deposition modeling (FDM) with full consideration of technology characteristics of this promising fabricating method. At first, analysis on the similarities and differences between FDM and the conventional milling manufacturing is conducted from the tool-path planning perspective. Meanwhile, some specific features of FDM are analyzed in detail to point out three critical issues in the path planning process which is correlated with the fabricating quality and modeling accuracy. These issues are described specifically by means of theoretical analysis and practical fabrication: large number of uncut paths, sharp corners in the filling path, and overfill and underfill phenomena which are out of the constant gap between parallel paths. The proposed tool-path generation method determines the inclination of the reference line based on less number of sharp corners in the paths firstly. Then, the filling area is divided with three stages. The pre-sweeping stage employs a group of paralleling lines with pre-determined gaps and optimized inclination to intersect the filling boundaries and stores the intersections between them, the second stage adjusts some sweeping line segments which satisfy several specific conditions, and the last stage divides the filling areas into several sub-regions according to the selected sweeping lines. Subsequently, the sweeping lines within each sub-region are adjusted adaptively to uniform gaps individually. At last, some adjacent sub-paths that can be connected to decrease the number of uncut paths are linked. Relative performance evaluation and experimental analyses are provided to demonstrate that the proposed methods can enhance the fabricating quality significantly with some improvements in the machining efficiency.

NEW APPROACH TO RAPID SEARCHING PATH GENERATING MECHANISMS

Mechanism Reverse Design Based on Curve Encoding and Matching Approaches

Path Synthesis of Crank-Rocker Mechanism Using Fourier Descriptors Based Neural Network

A fully analytical method for coupler-curve synthesis of planar four-bar linkages

Process Modeling in Mechanisms Design Based on Coupling Information

New approach for mechanism synthesis based on the chaotic property of Newton iteration

Coupling Degree of Mechanism and Its Application

An Improved Fourier-Based Method for Path Generation of Planar Four-Bar Linkages without Prescribed Timing

Using instantaneous invariants of the curvature theory in motion generation synthesis of 4R mechanisms with higher-order coupler point kinematics

Comprehensive approach for the dimensional synthesis of a four-bar linkage based on path assessment and reformulating the error function

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Path synthesis of planar four-bar linkages for closed and open curves using elliptical Fourier descriptors

A Parallel-Based Path Generation Method for Fused Deposition Modeling

Rule-based Method for Generating Mechanical Kinematic Function Scheme

Automated Conceptual Design Of Mechanisms Using Improved Morphological Matrix

Automated Creation of Topological Structure Models of Parallel Mechanisms for Kinematic Performance Evaluation.

Computer-Aided Synthesis of Linkage-Type Straight-Line and Dwell Mechanisms

Enabling the transfer matrix method to model serial–parallel compliant mechanisms including curved flexure beams

Research on Web-Based Optimization for Path Generation Synthesis of Planar Four-Bar Linkage

A new methodology for optimal kinematic design of parallel mechanisms

A novel design approach based on sequential-conjugate method for high-mesh-ratio harmonic drives with dual-conjugate profiles and polynomial wave generators