Abstract:The present study employs the power series method (PSM) to accurately predict the natural frequencies of eleven offshore wind turbines (OWT). This prediction is very important as it helps in the quick verification of experimental or finite element results. This study idealizes the OWT as a stepped Euler-Bernoulli beam carrying a top mass and connected at its bottom to a flexible foundation. The first part of the beam represents a monopile and the transition piece while its second part is a tower. The foundation is modeled using three springs (lateral, rotational, and cross-coupling springs). This work’s aim is at improving therefore the previous researches, in which the whole wind turbine was taken as a single beam, with a tower being tapered and its wall thickness being negligible compared to its diameter. In order to be closer to real-life OWT, three profiles of the tapered tower are explored: case 1 considers a tower with constant thickness along its height. Case 2 assumes a tower’s thickness being negligible compared to its mean diameter, while case 3 describes the tower as a tapered beam with varying thickness along its height. Next, the calculated natural frequencies are compared to those obtained from measurements. Results reveal that case 2, used by previous researches, was only accurate for OWT with tower wall thickness lower than 15 mm. Frequencies produced in case 3 are the most accurate as the relative error is up to 0.01%, especially for the OWT with thicknesses higher or equal to 15 mm. This case appears to be more realistic as, practically, wall thickness of a wind tower varies with its height. The tower-to-pile thickness ratio is an important design parameter as it highly has impact on the natural frequency of OWT, and must therefore be taken into account during the design as well as lateral and rotational coupling springs.

Empirical Formula for Fundamental Natural Period of Wind Turbines

Analytical Solution for Natural Frequency of Monopile Supported Wind Turbine Towers

Analysis of Vibration Monitoring Data of an Onshore Wind Turbine under Different Operational Conditions

Variation Rule of Wind Speed and Its Influence on the Fast Frequency Response of Wind Turbine Generator

Fatigue Life Evaluation of Wind Turbine Tower Based on Measured Data

Rolling Prediction Method of Input Wind Power of Wind Turbine Generators in Wind Farm

Practical formulae of wind-induced vibration factor for double-layer cylindrical and spherical grid structures

A Simplified Method for Analyzing the Fundamental Frequency of Monopile Supported Offshore Wind Turbine System Design

Seismic calculation methods of base shear and moment for wind turbines

Empirical formula of fundamental period for steel structure based on seismic response record

Statistical extrapolation methods and empirical formulae for estimating extreme loads on operating wind turbine towers

NUMERICAL METHOD FOR CALCULATING SYSTEM FUNDAMENTAL FREQUENCIES OF OFFSHORE WIND TURBINES WITH MONOPILE FOUNDATIONS

Semi-Analytical Formula for Estimating Variance Response of Megawatt Wind Turbine Tower Under Parked Condition

Empirical formula for fundamental period of frame-shear wall structures based on structural strong motion records

Study on empirical formula for natural period of moment resisting steel frame structures

An Accurate Estimation of the Eigenfrequency of an Offshore Wind Turbine Considered As the Stepped Euler-Bernoulli Beam in Three-Spring Flexible Foundation Using the Power Series Method

SIMULATION OF FLUCTUATING WIND IN WIND FARM AND DYNAMIC RESPONSE OF WIND TURBINE TOWER

Modeling Principle and Parameter Identification of Double Fed Wind Turbine for Electromechanical Transient Simulation of Power System

Analysis of wind speed probability distribution and wind turbine generator capacity factor

The Method of the Natural Frequency of the Offshore Wind Turbine System Considering Pile–Soil Interaction

Investigation of natural frequency of wide-shallow composite bucket supported offshore wind turbine: Application to real data