Abstract:Metal organic frameworks (MOFs) are of significant interest for photocatalysis using visible light, but they are typically limited by the instability and high recombination ratio of photoexcited pairs. Integrating MOFs into an inorganic semiconductor is one of the most widespread methods to promote their activity. In this study, a core-shell structured MOF@TiO2 (NH2-UiO-66@TiO2) was synthesized as an efficient photocatalyst for the degradation of toluene. Pristine NH2-UiO-66 was synthesized by a hydrothermal method as the core, which was then coated with an amorphous TiO2 shell. Compared with pristine NH2-UiO-66 and other samples prepared by the direct mixing of NH2-UiO-66 and TiO2, NH2- UiO-66@TiO2 exhibited a higher degradation rate of toluene. Using NH2- UiO-66@TiO2 as a catalyst, the degradation efficiency of toluene reached 76.7% within 3 h, which is 1.48 times higher than that of NH2-UiO-66. The degradation performance was also stable in four repeated reuse experiments, and the slight deactivation was reactivated after washing with ethanol. A series of characterization methods were used to determine the physicochemical properties of NH2-UiO-66@TiO2, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Using the measured physicochemical properties, the photocatalytic mechanism of NH2-UiO-66@TiO2 was explored. NH2-UiO-66 is an ideal photocatalyst, with visible-light response and a huge specific surface area (914.9 m(2).g(-1)), which is favorable for the utilization of sunlight as well as the absorption of pollutants in indoor air. In addition, a new interface formed between the two components (NH2-UiO-66 and TiO2), which efficiently broaden the light absorption area and enhanced the utilization of photogenerated species. The photogenerated holes and electrons could transfer through the interlayer as soon as they were formed. It is speculated that holes would transfer to the HOMO of NH2-UiO-66, and then combine with H2O molecules to form hydroxyl radicals (center dot OH). At the same time, more electrons tended to combine with oxygen molecules in the conduction band of TiO2 rather than recombine with holes. Consequently, the recombination rate of electrons and holes decreased, while the quantity of oxygen radicals and hydroxyl radicals increased. Toluene was efficiently oxidized by these two types of radicals. Owing to the outstanding properties mentioned above, the strategy of constructing NH2-UiO-66@TiO2 is considered to be an effective approach. This work may provide new insights into the design of core-shell structured MOF@photocatalysts for the photocatalytic degradation of indoor air pollutants.

Novel Core-Shell Structured Mesoporous Titania Microspheres: Preparation, Characterization and Excellent Photocatalytic Activity in Phenol Abatement

Soft-chemical Synthesis of Mesoporous Nitrogen-Modified Titania with Superior Photocatalytic Performance under Visible Light Irradiation

Rational Design of Nitrogen and Carbon Co-Decorated Mesoporous TiO2 Composites for Photocatalytic Selective Oxidation of Alcohols

Direct Hydro-Alcohol Thermal Synthesis of Special Core–shell Structured Fe-doped Titania Microspheres with Extended Visible Light Response and Enhanced Photoactivity

Directed Synthesis of Hierarchical Nanostructured TiO2 Catalysts and Their Morphology-Dependent Photocatalysis for Phenol Degradation.

Solvothermal synthesis of stable nanoporous polymeric bases-crystalline TiO2 nanocomposites: visible light active and efficient photocatalysts for water treatment.

A H2O2 Oxidation Approach to Ti3C2/TiO2 for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water.

Low Temperature Synthesis of Few-Layer Titanate Nanobelts on Ti Mesh and the Hot-Water Induced Transformations to Highly Photocatalytic Active Titania Nanorods

Alkaline hydrothermal synthesis of homogeneous titania microspheres with urchin-like nanoarchitectures for dye effluent treatments.

Preparation of SiO2@Au@TiO2 Core–shell Nanostructures and Their Photocatalytic Activities under Visible Light Irradiation

One-Step Synthesis Of Bifunctional Tio2 Catalysts And Their Photocatalytic Activity

Preparation and Characterization of SiO<SUB>2</SUB>/TiO<SUB>2</SUB>-Pt Core/Shell Nanostructures and Evaluation of Their Photocatalytic Activity

Preparation, Phase Transformation and Photocatalytic Activities of Cerium-Doped Mesoporous Titania Nanoparticles

Highly Uniform Platinum Photodeposited Hollow Mesoporous Titania Nanoparticles for Photocatalytic Degradation of Phenol

Preparation of Mesoporous Anatase Titania with Large Secondary Mesopores and Extraordinarily High Photocatalytic Performances

Simple preparation of sub-micron mesoporous TiO2 spheres consisting of anatase nanocrystals

Hierarchical Mesoporous Grape-Like Titania with Superior Recyclability and Photoactivity

Preparation of Highly Photoactive Nanocrystalline Anatase Tio2 by Low-Temperature Benzyl Alcohol Alcoholysis

Preparation of Nano-Tio2 Photocatalysts and Their Decomposition Activity in Phenol-Contaminated Water

Core-Shell Structured NH2-UiO-66@TiO2 Photocatalyst for the Degradation of Toluene under Visible Light Irradiation

Synthesis of Well-Ordered Mesoporous Titania with Tunable Phase Content and High Photoactivity