Abstract:DFT predictions indicated that a moderate presence of structural water optimizes electrical conductivity and facilitates zinc ion diffusion. Based on the theoretical calculations, the structural water content in vanadium oxides is tuned by introducing Al3+, and AlVO‐1.6H2O with an appropriate amount of water content showed excellent electrochemical properties (no capacity decay after 95 cycles at 0.2 A g−1). This study combines experimental methods with density flooding theory (DFT) calculations to investigate the enhancement of the electrochemical performance of vanadium oxide cathodes for aqueous zinc ion batteries (AZIBs) through strategic water content management. DFT predictions indicated that a moderate presence of structural water optimizes electrical conductivity and facilitates zinc ion diffusion. These theoretical insights are empirically validated by synthesizing AlVO‐1.6 H2O using a hydrothermal method, which exhibited superior electrochemical properties. This material demonstrated an impressive initial capacity of 316 mAh g−1 at 0.2 A g−1, with robust capacity retention after extended cycling. Remarkably, even at an elevated current density of 10 A g−1, it sustains a capacity of 161.6 mAh g−1, while maintaining a capacity retention of 97.6% over 2000 cycles. The results confirm that adjusting the structural water content in vanadium oxides significantly boosts their electrochemical capabilities, aligning experimental outcomes with computational forecasts and showcasing a novel approach for developing high‐performance cathodes in energy storage technologies.

Experimental Research on Energy Consumption in Zinc Containing WastewaterTreatment by Three-dimensional Activated Carbon Electrode

Electro-deposition experiment of electrolytic zinc rinsing wastewater

RESEARCH ON KINETICS OF TREATMENT OF ELECTROLYTIC ZINC WASTEWATER BY ELECTRODEPOSITION

Electrochemical removal of zinc and nickel ions from wastewater using porous electrodes

Boosting Material Utilization via Direct Growth of Zn2(V3O8)2 on the Carbon Cloth as a Cathode to Achieve a High‐Capacity Aqueous Zinc‐Ion Battery

Constructed wetland-microbial fuel cells enhanced with zero-valent iron for wastewater treatment and power generation

Combined Electrochemical & Biological Treatment of Industrial Wastewater Using Porous Electrodes and a Packed Bed Aerator

Effects of an Electric Field and Zero Valent Iron on Anaerobic Treatment of Azo Dye Wastewater and Microbial Community Structures.

The recovery of zinc from hot galvanizing slag in an anion-exchange membrane electrolysis reactor.

Variation of current density with time as a novel method for efficient electrochemical treatment of real dyeing wastewater with energy savings

Recycle and preparation of zinc used for zinc-air battery

Removal of ammonia nitrogen from wastewater by three-dimensional electrode system based on solid waste containing iron

Electricity production during the treatment of real electroplating wastewater containing Cr6+ using microbial fuel cell

Nanoscale Zero Valent Iron Supported by Biomass-Activated Carbon for Highly Efficient Total Chromium Removal from Electroplating Wastewater

A Novel Method for Efficient Electrochemical Treatment of Actual Dyeing Wastewater With Energy Saving

High Zinc Utilization Aqueous Zinc Ion Batteries Enabled by 3d P Rinted Graphene Array S

Electrode and Azo Dye Decolorization Performance in Microbial-Fuel-cell-coupled Constructed Wetlands with Different Electrode Size During Long-Term Wastewater Treatment.

Experimental Validation of Density Functional Theory Predictions on Structural Water Impact in Vanadium Oxide Cathodes for Zinc‐Ion Batteries

Study on Electrodeposition Recovery of Heavy Metal in Complexation-Ultrafiltration Process

Factors affecting the performance of microbial fuel cells for sulfide and vanadium (V) treatment

Methods to improve electrochemical treatment effect of dye wastewater