Abstract:Two methacrylate monomers, oligo(ethylene glycol) methyl ether methacrylate (OEGMA; MW=300gmol−1, poly(ethylene glycol) (PEG) side chains of average length n=4.5) and 2-methacryloyloxyethyl phosphorylcholine (MPC; MW=295gmol−1), were grafted from silicon wafer surfaces via surface-initiated atom transfer radical polymerization. The grafted surfaces were used as model PEG and phosphorylcholine surface systems to allow comparison of the effectiveness of these two motifs in the prevention of plasma protein adsorption and platelet adhesion. It was found that at high graft density fibrinogen adsorption from plasma on the poly(MPC) and poly(OEGMA) surfaces for a given graft chain length was comparable and extremely low. At low graft density, poly(OEGMA) was slightly more effective than poly(MPC) in resisting fibrinogen adsorption from plasma. Flowing whole blood experiments showed that at low graft density the poly(OEGMA) surfaces were more resistant to fibrinogen adsorption and platelet adhesion than the poly(MPC) surfaces. At high graft density, both the poly(MPC) and poly(OEGMA) surfaces were highly resistant to fibrinogen and platelets. Immunoblots of proteins eluted from the surfaces after contact with human plasma were probed with antibodies against a range of proteins, including the contact phase clotting factors, fibrinogen, albumin, complement C3, IgG, vitronectin and apolipoprotein A-I. The blot responses were weak on the poly(MPC) and poly(OEGMA) surfaces at low graft density and zero at high graft density, again indicating strongly protein resistant properties for these surfaces. Since the side chains of the poly(OEGMA) are about 50% greater in size than those of poly(MPC), the difference in protein resistance between the poly(MPC) and poly(OEGMA) surfaces at low graft density may be due to the difference in surface coverage of the two graft types.

Surface modification of natural rubber latex films via grafting of poly(ethylene glycol) for reduction in protein adsorption and platelet adhesion

Surface Modification of Poly(tetrafluoroethylene) Films Via Grafting of Poly(ethylene Glycol) for Reduction in Protein Adsorption

Surface modification of natural rubber latex films by graft copolymerization

Modification of Si(100) Surface by the Grafting of Poly(ethylene Glycol) for Reduction in Protein Adsorption and Platelet Adhesion.

Surface Modification of Polypyrrole Films Via Grafting of Poly(ethylene Glycol) for Improved Biocompatibility

Surface Modification of Ultrahigh Molecular Weight Polyethylene by the Poly(Ethylene Glycol)-Grafted Method and Its Effect on the Adsorption of Proteins and the Adhesion of Blood Platelets

Methacrylate polymer layers bearing poly(ethylene oxide) and phosphorylcholine side chains as non-fouling surfaces: in vitro interactions with plasma proteins and platelets.

Modification of Gold Surface by Grafting of Poly(ethylene Glycol) for Reduction in Protein Adsorption and Platelet Adhesion

Plasma-induced Graft Polymerization of Poly(ethylene Glycol) Methyl Ether Methacrylate on Poly(tetrafluoroethylene) Films for Reduction in Protein Adsorption

Modification of Natural Rubber Latex by Graft Copolymerization of 2-Ethylhexyl Acrylate and Methacrylic Acid

Surface modification of polymers for adhesion enhancement

Modification of Polycarbonateurethane Surface with Poly (ethylene Glycol) Monoacrylate and Phosphorylcholine Glyceraldehyde for Anti-Platelet Adhesion

Modifi Cation of Natural Rubber Latex by Graft Copolymerization of 2-Ethylhexyl Acrylate and Methacrylic Acid

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion.

A Versatile Star PEG Grafting Method for the Generation of Nonfouling and Nonthrombogenic Surfaces

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)

Platelet adhesion and protein adsorption on silicone rubber surface by ozone-induced grafted polymerization with carboxybetaine monomer.

A Mild Method for Surface-Grafting PEG Onto Segmented Poly(Ester-Urethane) Film with High Grafting Density for Biomedical Purpose

Chemical modification of poly(vinyl chloride) resin using poly(ethylene glycol) to improve blood compatibility

Modification of deproteinized natural rubber via grafting polymerization with maleic anhydride

Plasma Graft of Poly（ethylene Glycol） Methyl Ether Methacrylate （PEGMA） on RGP Lens Surface for Reducing Protein Adsorption