Abstract:Carbon has always been considered as a harmful impurity element in NiTi shape memory alloys and has been controlled as low as possible. Surprisingly, it is found in this work that a certain amount of carbon can be beneficial for the NiTi alloys. Electron beam directed energy deposition (EB-DED) technology is employed to fabricate NiTi alloy components by using two types of feeding wires with lower carbon content (0.009 wt%) and higher carbon content (0.037 wt%), respectively. Results show that when the feeding wire of lower carbon content is used, the dominant second phase in the as-built NiTi alloys are coarse Ti2Ni phase, which is brittle and harmful to tensile properties. When the feeding wire of higher carbon content is used, the second phase in the as-built NiTi alloys is changed to fiber-like TiC phase, with other microstructural characteristics basically unchanged. Accordingly, the tensile ductility is notably improved by the increase in carbon content, with elongation doubled from 6.1 % to 12.8 %. In addition, the cyclic life of the NiTi alloys in tensile superelasticity tests is also significantly improved. The NiTi alloys with lower carbon, no matter heat treated or not, prematurely fracture within 10 load cycles. In contrast, the NiTi alloys with higher carbon, after aging treatment, demonstrate an excellent superelastic recovery rate of 93.17 % after the 1st load cycle, and do not fracture after 50 load cycles. Such tensile property is the best among those achieved so far for the additively manufactured NiTi alloys. This study provides a new perspective on the role of carbon, which, instead of being a harmful element, could actually be used to improve the microstructures and properties of the additively manufactured NiTi shape memory alloys.

A study on NiTiNbCo shape memory alloy

Unraveling role of Co addition in microstructure and mechanical properties of biomedical Ti-Nb based shape memory alloy

The effect of cobalt alloying on the phase transformation kinetics of Ni-Ti alloys

The microstructural characteristics and high temperature mechanical properties of quaternary Ti–V–Al–Co shape memory alloys

On the Significance of C and Co on Shape Memory Performance of Fe–Mn–Si–Cr–Ni Shape Memory Alloy

Effect of Cobalt Addition on Thermal Cycling Behaviour of Ti50Ni(50-x)Cox Shape Memory Alloys

Effect of Stoichiometry on Shape Memory Properties of Ti-Ni-Hf-Cu-Nb Shape Memory Alloys Manufactured by Suspended Droplet Alloying

Martensitic Transformation and Magnetic Properties of Ti-doped NiCoMnSn Shape Memory Alloy

Influence of Cobalt on the Hot Deformation Characteristics of an NiTi Shape Memory Alloy

Fe–Mn–Si–Cr–Ni Based Shape Memory Alloy: Thermal and Stress-Induced Martensite

Effect of Co on microstructures and mechanical properties for Nb-Si based in-situ composites

Martensitic Transformation and Shape Memory Effect of NiCoMnSn High Temperature Shape Memory Alloy

Effect of Co Addition on Solidification Velocity, Hardness and Refined Structure Transformation Mechanisms of Undercooled Ni-Cu-Co Alloys

Influence of Nb Content on Martensitic Transformation and Mechanical Properties of Tinicunb Shape Memory Alloys

Study on the Role of Carbon in Modifying Second Phase and Improving Tensile Properties of NiTi Shape Memory Alloys Fabricated by Electron Beam Directed Energy Deposition

Effect of Nb-Content on Mechanical Properties of (Ni<sub>47</sub>Ti<sub>44</sub>)<sub>100-x</sub>Nb<sub>x</sub> Shape Memory Alloys

Effect of niobium content on shape memory characteristics of (Ni47Ti44)(100-x)Nb-x alloys

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Effect of cobalt content on the microstructure, microtexture, and mechanical properties of W-Ni-Fe-xCo alloys during solid-phase-sintering and liquid-phase-sintering

The Microstructure and Shape Memory Effect of Ti-16 At.%Nb Alloy

Microstructure and mechanical behaviors of Co-Ni Magneto - shape - memory alloys