Abstract:In this study, a kind of amphoteric chitosan-based flocculants (3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CTA) modified carboxymethyl chitosan, denoted as CMC-CTA) have been prepared. The amphoteric flocculants showed notable improvement in solubility and salt-resistance in the whole pH range compared with its precursors, i.e., chitosan and cationic chitosan. The flocculation properties of CMC-CTA were systematically studied at both the laboratory and pilot scales. At laboratory scale, kaolin suspension was employed as synthetic water in the beaker experiment. The effects of pH, temperature, and original turbidity of untreated water on the dosage and flocculation performances were investigated, respectively. At pH below and above the isoelectric point of CMC-CTA, the optimal flocculation performances were obtained with a dosage of 0.03–0.20mg/L and 0.8–1.0mg/L, respectively. The flocculation mechanism was discussed in detail from the morphologies of polymeric flocculants and flocculation kinetics: The shape and charge of polymer chains in the solution greatly influenced the final flocculation performances; The flocculation kinetics agreed well with the particle collision model. Moreover, raw water from the Zhenjiang part of the Yangtze River in China was used for the further investigation of the flocculation properties at the pilot scale. The influences of dosage, sedimentation time, and mechanical mixing rate to the flocculation properties were studied by orthogonal testing. The optimal experimental condition was then obtained. Compared with the currently used flocculants in the Zhenjiang Water Factory, i.e., polyferric sulfate, which has an optimal dosage around 40mg/L, the value of CMC-CTA (1.1mg/L) decreased greatly. Above all, the flocculation experiments at the laboratory and pilot scales both indicate that the amphoteric chitosan-based flocculants have good flocculation performances in a wide pH range.

Synthesis of Novel Amphoteric Chitosans As Flocculants and Research on the Flocculation

Flocculation Properties of Biodegradable Amphoteric Chitosan-Based Flocculants

Synthesis of an Amphoteric Chitosan-Based Flocculant and Its Flocculation Performance in the Treatment of Dissolved Organic Matter from Drinking Water

Preparation of Strong Cationic Chitosan-graft-Polyacrylamide Flocculants and Their Flocculating Properties

STUDY ON MODIFICATION AND APPLICATION OF CHITOSAN

Synthesis of novel chitosan-based flocculants with amphiphilic structure and its application in sludge dewatering: Role of hydrophobic groups

Cationic Content Effects of Biodegradable Amphoteric Chitosan-Based Flocculants on the Flocculation Properties

Evaluation of a Novel Chitosan-Based Flocculant with High Flocculation Performance, Low Toxicity and Good Floc Properties

Synthesis and characterization of a novel cationic chitosan-based flocculant with a high water-solubility for pulp mill wastewater treatment.

Preparation and Application of Modified Chitosan Flocculant for Decoloration

Preparation and Characterization of N-succinyl-chitosan

The Heterogeneous Preparation of N-sulfated Chitosan Derivatives

Effect of Fine Structure of Chitosan-Based Flocculants on the Flocculation of Bentonite and Humic Acid: Evaluation and Modeling.

The Spectral Characterizations of Chitosan Based Flocculants Synthesized by Photopolymerization

Dielectric barrier discharge plasma-modified chitosan flocculant and its flocculation performance

UV-initiated synthesis of a novel chitosan-based flocculant with high flocculation efficiency for algal removal.

Synthesis of a Novel Amphiphilic and Cationic Chitosan-Based Flocculant for Efficient Treatment of Oily Wastewater

Development of Chitosan As Flocculants

Synthesis and Rheological Behavior of a Novel N‐sulfonate Ampholyte Chitosan

A review on chitosan-based flocculants and their applications in water treatment.

The preparation of gallic acid-grafted cationic chitosan as effective salt-tolerant flocculants