Abstract:The control of nanoporous microstructure of TiO2 coating in the dye-sensitized solar cells (DSC) through preparation methods influences significantly the performance of the cells. To investigate the effect Of microstructure of TiO2 deposit on the cell's performance, in present study, vacuum cold spray (VCS) process is employed to deposit nanocrystalline TiO2 coatings on an ITO conductive glass substrate. TiO2 deposits were produced using nanosized particles of 25 nm in the diameter and composite powder composed of polyethylene glycol (PEG) and 25 nm TiO2 particles. The deposition characteristics and the microstructure of the coating are characterized by scanning electron microscopy, x-ray diffraction analysis. The performance of the cell is tested under illumination of a metal halide lamp with a radiation intensity of 600 W(.)m(-2). It was found that a dense TiO2 coating with retention of crystal structure of powder can be deposited by vacuum cold spraying directly using nanosized TiO2 powder. A cell with TiO2 coating of 3.8 mu m thick deposited directly by 25 nm powders yielded a short current density of 90.0 A(.)m(-2) and conversion efficiency of 5.1% which was comparable with that of the wet doctor blading TiO2 coating. Using a composite powder of TiO2 with PEG, a porous TiO2 coating with a thickness up to several tens of micrometers can be deposited by vacuum cold spraying. A DSC cell of TiO2 coating deposited using a composite powder containing 41.2% PEG presented a higher short current density of 145.0 A(.)m(-2), and conversion efficiency of 7.1%.

A simple method to prepare uniform-size nanoparticle TiO2 electrodes for dye-sensitized solar cells

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Preparation of high efficiency TiO_2 photoanode for dye-sensitized solar cells by electrostatic spray

Electrospray Dense Suspensions of Tio2 Nanoparticles for Dye Sensitized Solar Cells

Electrospraying tuned photoanode structures for dye-sensitized solar cells with enhanced energy conversion efficiency

Fabrication of Mesoporous TiO2 Electrodes by Chemical Technique for Dye-Sensitized Solar Cells

Improved performance of TiO2 electrodes coated with NiO by magnetron sputtering for dye-sensitized solar cells

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Preparation of nanocrystalline TiO2 electrode by layer-by-layer screen printing and its application in dye-sensitized solar cell

Improvement of dye-sensitized solar cell performance through electrodepositing a close-packed TiO 2 film

Fabrication and Properties of Meso-Macroporous Electrodes Screen-Printed from Mesoporous Titania Nanoparticles for Dye-Sensitized Solar Cells

Preparation of Nano Titania and Its Application in Solar Cells

Preliminary Study of Performance of Dye-Sensitized Solar Cell of Nano-TiO2 Coating Deposited by Vacuum Cold Spraying

Synthesis of Different Sizes TiO2 and Photovoltaic Performance in Dye-Sensitized Solar Cells

Controllable Agglomeration of Titanium Dioxide Particles by One-Step Solvothermal Reaction Toward Efficient Dye-Sensitized Solar Cell

Size-controlled nanoporous TiO2 spheres with high dye-loading: Facile synthesis and application as scattering layers in dye-sensitized solar cells

Nano-TiO2 thin film prepared by colloidal spray coating and its application in dye sensitized solar cells

Strategy to Improve the Performance of Dye-sensitized Solar Cells Based on TiO 2 Films Prepared by Room Temperature Cold Spray

Fabrication of TiO2 Aggregates by Electrospraying and Their Application in Dye-Sensitized Solar Cells