Abstract:Melt-grown oxide eutectic ceramics are well known for their excellent mechanical properties and microstructural stabilities at ultra-high temperatures. Laser powder bed fusion (LPBF) provides a novel technology for manufacturing materials with large sizes and complex structures. However, crack controlling is a serious challenge in this process owing to the intrinsic brittleness of ceramic materials. In this study, LPBF method is applied to fabricate Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics assisted by a finite element method (FEM) to investigate an optimized process and innovatively reveal the crack formation mechanism and propagation behavior via a single track, a single layer, and multilayers. Temperature and thermal stress distributions under different process parameters are obtained. The maximum tensile stress & sigma;y (in front of and behind the edge of the molten pool) perpendicular to the scanning direction induces a longitudinal crack, the tensile stress & sigma;x (at the side rim of the molten pool) parallel to the scanning direction induces a transverse crack, and the shearing stress on the XY plane promotes the deflection of the transverse crack on one side of the single track. In the multilayer, the maximum principal stress occurs at the margin zone of the deposition. The maximum principal stress increases at the first three layers and then decreases after the fourth layer. Based on the simulation result, the as-solidified Al2O3/GdAlO3/ZrO2 eutectic ceramics with multiple shapes, such as cylindrical, cubic with round corners, triangular prism, and quadrangular, with dimensions of 30 mm (width or diameter) x 30 mm (length or diameter) x 1 mm (height) and ultra-fine eutectic microstructures (eutectic spacing of approximately 88 nm) are fabricated by LPBF, providing a significant potential to overcome the bottleneck for fabricating large-size and complex-structure ceramics directly in a single-step process. This work provides theoretic foundation and technical support for preparation of ultra-high temperature solidified oxide eutectic ceramics with ultra-fine microstructures and complex structures directly, which has great application potential in fields as aerospace, machinery, and chemical industry.

Rapid Solidification and Fracture Behavior of Ternary Metastable Eutectic Al2o3/Yag/Ysz in Situ Composite Ceramic

Rapid Fabrication of Bulk Graded Al2o3/Yag/Ysz Eutectics by Combustion Synthesis under Ultra-High-Gravity Field

Seed-crystal-induced directional solidification toward Al2O3/(Y0.2Er0.2Yb0.2Ho0.2Lu0.2)3Al5O12/ZrO2 ternary eutectic ceramics

Microstructure of Directionally Solidified Al2O3/EAG Eutectic Ceramics Prepared with High-Temperature Gradient

Rapid production of bulk Al2O3/YAG/YSZ ternary eutectic ceramic by ultra-high-gravity melt-casting

Preparation, Microstructure and Properties of Ternary Al2O3/YAG/ZrO2 Ceramics Hot Pressed with Eutectic Composition Powders

In Situ Fabrication and Microstructural Evolution of Al2O3-ZrO2 Nanoeutectic Ceramics by a Novel Pulse Discharge Plasma Assisted Melting Method

High Temperature Deformation of Non-Directionally Solidified Al2O3/YAG/ZrO2 Eutectic Bulk Ceramic

Microstructure and Mechanical Properties of Al2O3/YAG Eutectic Ceramic Grown by Horizontal Directional Solidification Method

Evaluation of Fracture Toughness of Zirconia Ceramics with Heterogeneous Yttrium Distribution Microstructures

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Directional solidification and growth characteristics of Al2O3/Er3Al5O12/ZrO2 ternary eutectic ceramic by laser floating zone melting

Microstructure Evolution Of Melt-Grown Al2o3/Zro2/Yag Eutectic Ceramic By High Temperature Fused Method

Regulation of Y2O3 addition on structure and properties of Al2O3/ZrO2(Y2O3) directionally solidified eutectic ceramic

Effect of Y2O3 Contents on Microstructural, Mechanical, and Antioxidative Characteristics of Al2O3-ZrO2-Y2O3 Coatings

Mechanical properties of directionally solidified Al 2 O 3 /Y 3 Al 5 O 12 eutectic ceramic prepared by optical floating zone technique

Large-size Complex-Structure Ternary Eutectic Ceramic Fabricated Using Laser Powder Bed Fusion Assisted with Finite Element Analysis

Effect of Molten Zone Ablated by Femtosecond Laser on Fracture Toughness of Oxide Ceramics

Preparation and Microstructure of Polycrystalline Al2O3–YAG Composites

Microstructures and Mechanical Properties of Al2O3/YAG:Ce3+ Eutectics with Different Ce3+ Concentrations Grown by HDS Method

Predicting rapid growth behavior in solidified eutectic ceramic composites using infrared thermal imaging and thermal field simulation during laser directed energy deposition